VW 2005-2010 IGNITION LOCK CYLINDER HOUSING ISSUE
HTML-код
- Опубликовано: 27 июл 2020
- I will show you a common problem that happens frequently with these vehicles .. due to the weight of the vehicle going against the steering lock button mechanism .. a small spring goes bad.. this is a quick easy fix to save you money however, I recommend you just buy a new housing and remove the old ignition lock cylinder by drilling a hole in the old housing that way you can turn the key to on position and align the dots on the lock cylinder key to remove it and place it on the new housing!! Thank you for watching, if this helped you out please help me out by subscribing to my channel and turning on the notifications. Thank you have a great day!! Leave a comment or email me at lilroxx001@yahoo.com !
CASH APP: $PAYMEMONEYMIKE 
Авто/Мото
A huge thank you. I was lucky enough to have this fail happen in my garage. Without removing the cylinder from the car, I drilled through, removed the spring and cleaned it out with WD40 and compressed air. I was told an 8 week wait on a new column. Thankfully, I never ordered the column and had it fixed within the week with no new parts required. You saved me both time and money. Thank you again!
Nice. I’m going to try this as well. Have you had any issues ?
Thanks man was super confused on what exactly was the problem but this video relieved any confusion I had. Thanks again!
Im glad i was able to help!! Take care!!
Your honesty is great
Thank you sir!!
Man i didn't know that a couple days ago I was having the same problem with a housing like that one and now you find out something really nice that I was trying to figure it out for days...like you say it's no something like secure or but it's help and thank for sharing with everyone
Yes!! Its a nice easy and fast bypass!! But yes I recommend you change everything asap!
@@MYKEYSAUTOMOTIVE I know the best way is changing the entire housing 👍
Just wanted to say good luck in your new shop. As a business owner as well.. I feel for you these days. Are not like they used to be. When I first started my shop in 1980 you didn't have to fight for your money these days everyone wants something for nothing sounds like you know a little bit. About turning wrenches , more importantly you seem to know how to figure shit out. I've been a mech for a living for over 50 years . I like your presentation.
Congrats on the new location! The automotive walk in traffic will be beneficial to your key sales. I will have to stop by next time I’m in the area to say hello!
Thank you brother God bless you!!
Congratulations brother with you new place I wish the best, God bless you
Thank you brother!! Blessings!!
congratulations and thank you for all the help
Thank you for watching! Cheers mate!
Your good ppl my friend. I enjoy your videos.
Thank you my brother!!
Thanks for you videos and nice location
Thank you brother God bless!!
I’ve got this problem now it’s pissing me off lol 😂 thanks
Yes its very common ..its a pain in the behind!
Thank you very much. 👍🏼
Thank you for watching!! Please share !
Thank you so very much
Thank you Glad you liked it!!🙏🏼🙏🏼❤️❤️
Good videos
Thank you brother!!
Thank you so much for uploading this awesome video, please post more, i love your new location, looks cool 😎👍
Thank you brother
Thanks!!
Thank you for watching!! Blessings!!
thanks a lot will try that on a relatives vehicle and let u know how it went
Hi have some problem you think if I drill the spring it’s working or best to replace new one but is expensive
Best to replace with new part...brother,drilling spring is a good temporary fix aswell
great video bro, one question, why wouldnt you remove the ignition lock and put it in the new housing to avoid having to get a new key?
Great Video! Did you put the rod back in when reassembling?
Hello Friend!👋🏽👋🏽Please join our members only group for priority commenting! You can join From a desktop or laptop next to the subscribe button you will see the subscribe button! Thank you!!❤️❤️🙏🏼🙏🏼
Hy hy hy miky you are the best.
I've a quick question please how could it be possible for a 2019 jetta push button start that can start the car with out key insid the vehicle? That's a 2nd time I've face this scenario i ignored the 1st one after doing some research.
So far i was told 2nd key could be hidden somewhere inside the vehicle.
like door panels or the chip could be placed near the ignition cylinder? What you guy's all think?
Could be that a previous locksmith disabled immobiliser or yes lost key inside car..
Such a good video bro! I’m going thru this now with my daughter’s car. Key won’t turn all the way to ON and START position. It only goes to ACC.
I have a couple of questions for you.
1. It’s been 3 years since this video. Is this temp fix still working?
2. Do you have a video or information on how to disassemble the entire housing and rebuild?
3. Can you remove the lock mechanism without the original key? I have a full assembly that I got from a wrecker but I don’t have the key.
4. When you drilled out that spot, how deep did you go in? Is that just a cover that come out easily?
Thanks again bro!
this is only temporary .. i recommend you get a new one and just install the new one ..it will stay working for a good long while but it won't activate the steering lock.. you see this problem
is really common on all these vehicles . The problem starts when you lock the wheels at an uphill and all the weight pushes down on the steering lock mechanism.
And really nice place btw
Thank you sirr!! God bless!!
El seguro que perforas no es necesario ponérselo para atrás? O puede funcionar sin ese seguro
¡Hola, saludos! 👋🏽👋🏽 Para dar prioridad a los comentarios, ¡únete a nuestro club de miembros! ¡A continuación, el botón de suscripción desde una computadora portátil o de escritorio, verá el botón de unirse! ¡Gracias! 🙏🏼🙏🏼❤️❤️❤️
I have a 2008 VW Jetta the key was stuck I took the key part off and not the steering wheel is locked. If I buy the whole cylinder will it work with out a new key? Since it is a new key antenna that wil come with it?
Hello 👋🏽 friend! Thanks for watching, please don't forget to become a member of our channel to prioritize your comments! Thank you 🙏🏼❤️
Kiosk is closed? If you get a vw where key won’t turn back turn to crank and let it spin back it will shut itself off
Yes brother kiosk is closed for now... thank you brother for the info!!
what if there is no key and wanted to take out the lock to do full disassembly?
This is a quick little fix !! In that case i would just buy the whole ignition lock cylinder and housing new!!
Hey cant you just pull out the black end of the barrel insert into new housing and keep the same key ??
Yes
Horale pues! 🙂
@@driver209 si se puede nomas que acupas la llave original ..el cylindro tiene que estar abierto para sacarlo!
👌
Thank you for watching!!!
My husband replaced the ignition cylinder bit now my car won't stay on because the new key isn't programmed. How do I program the key?
You will have to call a locksmith to program your key.. unless you want to buy a $3500 car key programmer.... you can always buy a new shell and blade .. extract the chip and circuit board from old key and swap it into the new key!! Hope that helps
@@MYKEYSAUTOMOTIVE Oh nooooooo! Sound's complicated and expensive. We bought the housing with a new key .....just a normal key not the kind of key it came with. Too bad we didn't see your video.yesterday.
Thank you SOOO much for your advice.
Hey Brotha what do you need for the new shop?
I kinda got a little bit of everything ..i have remotes ..vvdi flip keys .. man i think i have everything
What lishi tool are you missing in your arsenal?
2815Juan man the most common lishi that i can always use is the fo38 for ford
If you start to feel your key stuck a little when turning replace it
Thank you for sharing !
Man I drilled that spring out and the key still ain’t turning 😢
After replacing the ignition cylinder with key I need to program the key
Yes
@@MYKEYSAUTOMOTIVE if I transfer the ignition switch to the new cylinder is not necessary to program the key right
Como aprendiste hacer todo eso?
Haci a la braba!!
MY KEYS AUTOMOTIVE se aprende mejor así!!
Destinny Hinojosa jajaja si!
Stick!! 😆😆😆
you use too many big words and technical terms, it's hard to follow ;)
Hehhe sorry
Why are you saying "you guys" so much?
What do you mean?
Why does it matter?