Ultra Shear 80-Tooth Miter Saw Blades

Product Page: www.woodpeck.c...
Ultra-Shear's 80-Tooth Miter Saw Blades use a specific tooth geometry and stringent grinding tolerance to deliver the cleanest possible crosscuts and miters on your standard or sliding-compound miter saw. Four alternate top bevel teeth followed by a raker slice fibers cleanly and evacuate the shavings from the kerf efficiently. The negative hook angle virtually eliminates self-feeding on plunge cuts and minimizes bottom tear-out. This is the ideal tooth configuration for modern sliding compound miter saws, pivoting miter saws and radial arm saws. We make the 80-Tooth Miter Saw Blades in three sizes; 10" with 5/8" arbor, 12" with 1" arbor and 260mm with 30mm arbor for the Festool Kapex. The 10" and 12" blades have a 1/8" (.125") kerf with -5° negative hook. The 260mm Kapex blade has a 2.5mm kerf and -2° negative hook.

[@mehulpgajjar4901]

Delivers in India?

[@pctatc66]

Question on the 260mm blade for the Kapex. The Kapex comes standard with a 2.5mm kerf blade. The Ultra-Shear blade has a 1/8" or 3.175mm kerf. How will the motor in the Kapex respond to the extra mass it has to spin. Also the twin lasers will need to be adjusted out to accommodate the extra kerf. Have you tested this blade on an actual Kapex and that the laser adjustment can be accomplished satisfactorily?

[@WoodpeckersLLC]

While trying to dig up an answer for you about the adjustment of the lasers, I found out it is a moot point. Our Kapex blade has the same specs as the the factory blade...260mm, 2.5mm kerf, 1.8mm plate thickness and 2-degree negative hook angle.