Smelting PC Parts for GOLD and PALLADIUM | Mix Computer Parts Gold recovery
HTML-код
- Опубликовано: 14 мар 2024
- Gold and palladium recovery from mix PC parts
Components:
Motherboards, RAMs, CD-ROMs, Hard drive, Graphic cards, Dial up card, Sound card, CPUs
Please subscribe to my RUclips channel by ➰clicking on Link below 👇
❌ Your support will aid me in creating higher-quality videos:❌
👇
ruclips.net/user/PickyPlans?su...
Contact me on :
Instagram : / pickyplans
Facebook: / picky.plans
telegram: t.me/pickyplans
#goldrecovery
#smelting
#cupellation
#ewasterecycling
#makingmoney
#gold 
Развлечения
8kg (16 PCs) motherboards mix mostly 1 BGA
9 PCS DDR RAMs mostly 1 sided ICs
5 PCS CD ram boards
6 PCS Graphic cards with BGA
7 PCS voice cards
1 piece Hard PCB
Wait is that striping powder is Cyanide the deadly poison that also use to disolve gold? I never see people strip gold really easy like this, they often burn this and wash with nitric acid to remove silver and copper.
Wow in this video you managed to cover all aspects of PM extractive metallurgy!
You are the only one who has referred to this.
There is a better and faster way 😊😅
@@PickyPlans i was thinking that exact same thought, i have been thinking of alllll the seperate ways of extraction and you just did it in one video, outstanding!!!! where do you get the stripping powder ??
Thank you my friend...
Seems only legends know these...
BTW, I make it myself. It's my product...
@@PickyPlans what country are you friend?
outstanding
Great... Always succes ..boss..👍👍😂🙏
excellent video brooo
Thank you so much bro🙏❤️
Obrigado irmão um grande abraço aqui do Brasil
Cara você é muito bom parabéns pelo seu vídeo ❤
obrigado!
damn Ure jenius Mate
This is some proper caveman science.
Good video, I also just take juicy chips and the rest of boards goes into electronic waste container and big guys play with that...
Perfeito!
بسیار عالی، ابتکار و خلاقیت فوق‌العاده ای داری میتونی جای دیگه استفاده کنی و درامد مناسبی داشته باشی.
روشی که تو این ویدئو بود (گلد استریپر) بازدهی پایینی داره از این مقدار متریال 2_3 گرم طلا باید دربیاد . درواقع الان فقط طلای آی سی و بی جی ای درومده مابقی تقریبا صفر. ا
مرسی.
همه روش هارو کار میکنم من با همین متریال قالکاری هم همین نتیجه رو گرفتم اختلاف زیادی نداشت. طلای پین ها خیلی نازک هستش و به دویست سوت نمیرسه .
@@PickyPlans البته وزن دقیق متریال ذکر نکردین و مادربرد جز همو چند تا آی سی و بی جی ای آبکاری پین ها خیلی ناچیز هست، و احتمالا محاسبه تون درست هست. بهترین روش برای مادربرد و بردهای لو گرید دقیقا همین گلداستریپر هست.
8kg (16 PCs) motherboards mix mostly 1 BGA
9 PCS DDR RAMs mostly 1 sided ICs
5 PCS CD ram boards
6 PCS Graphic cards with BGA
7 PCS voice cards
1 piece Hard PCB
بسیار عالی
خلاقیتی که تو ویدیو میبینم بی نظیره
به من لطف دارید ❤️🙏
❤
Hello can you give me information the names of materials from the beginning of the video to the end of the video and thank you the work is very wonderful
Thanks my friend...
The stripper composition is in this video 👇
ruclips.net/video/8e2o4S4qt4E/видео.htmlsi=uXuhggf9UXUBZYbm
(Here i used lime instead of sodium hydroxide)
And the other materials...flux for melting (sodium hydroxide and borax)
Another nice video, try to pyrolyze mother boards and smelt for copper yield
Thank you, my friend. I'm on the same page. However, I believe I'll need a large-scale pyrolysis setup beforehand.
@@PickyPlans you can do a test, pyrolizing can be done with your small furnace, just heat the shredded motherboards into crucible, you can add an iron tube above the top hole of the furnace and make some conductions to make smoke cool down, after finish mix your fluxes with the shredded pyrolized motherboards in the crucible and smelt.
@@ayhamhafez285 Do you need to test this. The process is quite straight forward.. just make sure to heat the stuff high enough to ensure a full decomposition, or you'll poison the surrounding.
Excellent as usual. It seems the cost and time far exceeds the return for the stripping process! What stripper do you use?
Thanks mate..
it's composed of an lixiviant for gold like (thiourea, cyanide or thiosulfate) i prefer cyanide
And oxidizer like metanitrobenzic acid
Other additives:
MBT (mercatobanzothiazole) as inhibitor for copper
Ph adjustors (Sodium hydroxide, lime ) i use lime
In this video i talked about this composition
ruclips.net/video/8e2o4S4qt4E/видео.htmlsi=W2G20h33M2O-EKLA
In part 1 i made m-nitrobenzoic acid
ruclips.net/video/hyQns1fdUa0/видео.htmlsi=9uVPwP7C24fXLuLI
Thanks mate!!!
Would it be a good idea to have a conical scorification dish and let it settle in it rather than pour it into a conical mould?
It's a good idea... I think you will have less surface area to wash materials in lead.
Very good, but I think it's to much energy wasted on to little material. High grade material or larger scale would be good
But you are really good at what your doing.
I agree, I needed to know Pd and Au yield of motherboards. Maybe next time...
Thank you man.
Can I use iron pot as Crucible?????
It's not a good idea
Lead would stick to it.
Use non-magnetic stainless steel.
Lead doesn’t “stick” to iron, lead oxide on the other hand “chews” through it, it does the same thing with stainless steel only more slowly. So it really depends on what are you going to use the crucible for. For melting lead iron is perfect, but for oxidising SS will last longer especially in alkaline medium.
Once, I poured 40 kg of molten lead from a cupellation furnace into an iron bowl serving as the mold (Charge temperature was 700° C). However, upon cooling, I found the lead adhered to the mold, akin to soldering. To retrieve it, I had to remelt the lead. Consequently, I began applying graphite powder to "Blacklead" all iron molds thereafter.
Which crucible you are using
I mean it is made up with ????
It's a cast iron pot
@@PickyPlansThanQ Bro
Muito bom meu amigo, parabéns qual é a sigla do strinping powder ❤
é composição de cianeto ou tioureia com ácido metanitrobenzico e mercatobanzotiazol aqui está o link para o vídeo ruclips.net/video/8e2o4S4qt4E/видео.htmlsi=xGrlQjnj23FKflBd
Valeu irmão obrigado pela oportunidade de aprender, um grande abraço aqui do Brasil
🌹🙏
After watching this video,I believe that you still lossing your gold.Total weight of silver when you add at beginning and weight at the end will count the losses of gold.
The yield is fair enough for about 8 kg of motherboards and a few pieces of PCbs. i used 28 grams silver at start. Few mg lost in the process, besides there is no correlation between silver losses and gold losses. Take look at Bugbee's text book.
@@PickyPlans I doing precious metals recovery with similar method.I believe that pyrometallurgy route is the best for E-waste materials.Most critical process is when smelting and cupelling.Good luck.
I read Bugbee cover to cover.
That's really a great book. You as well mate.
@@LimbahElektronikIndonesiaGREAT BOOK!
He directly melting AgCl And lost silver.
سلام بسیار عالی 👏....سیمانی که برای کوپل استفاده کردید چه نوع سیمانی هست؟
ممنونم.
سیمان پرتلند( سیاه) .
@@PickyPlans تشکر .بنده هم این نوع سیمان استفاده کردم بعد از حرارت خوردن ترک بداشت مشکلش چیه؟
هنگام فرم دهی حداقل میزان اب استفاده بشه یا اصلا استفاده نشه و با فشار فرم گرد ایجاد بشه
خلاقیتی که تو ویدیو میبینم بی نظیره