Parker this video came up for me man its crazy to think I remember seeing this video when it first came out. Super proud of you man and during my whole cancer bid alot of your videos helped me get to where I am now. You have been a huge inspiration and I am super proud of how much you have come along and grown man keep up the great work us little guys are cheering you on man!
I always upgrade mids and highs first. I know kids today don't care nothing about sound quality. But I've always made it sound really good then I get the subs. I like beating as hard as possible but still sounds clean.
Wow I'm a kid I'm just 14 I love sound quality bass isnt always my focus I still need to learn what the highs and mid are I think mid are treble and highs are vocals.
I have always done the same . I am 42 now and most people are distortion impaired lol. Back when I was growing up and now. I know some younger people that have systems today and yeah, what is sound quality? 🤣 They just want it to be loud. Doesn't matter if it sounds like shit or not. My friends always want a louder system but they only invest in subs or a newer amp.
Just bought this amp and I have JBL 6.5's & 6x9's kickin around my house I think I'll throw in my big rig. Speakers are rated 50w RMS I believe so they should be ok.🤞 Anything's better than the stock blown speakers crackling when volume's up at all🙄
I bought the Alpine KTA-450 powered by an Alpine-W650 running Alpine S 6.5 components & coaxial complete “Alpine” they’re great it blasts... I love that I didn’t have to run an amp kit and all the speaker wiring this little PowerPack has a PUNCH of sound it’s pretty much the same thing as the unit you have here... thanks for the videos very informative... those are some nice solder wire shrink wrap things I haven’t seen those yet n
cool man i just got my speakers too. i got infinity kappa components and coaxial speakers. i got them cuz its wired to 2.5ohms instead to the regular 4ohms
I tried that amp previously, and it was a little noisy. It had a hiss that I suppose my brain got used to, and eventually I didn't notice it; but, if I listened, it never went away. But, the music sound easily overpowers it. The punch it had was pretty impressive for being so small and with such low amp draw. I would presume that if used only for highs that the hiss would be even more noticeable.
What you described is a bad ground . Sometime cheap RCA's will cause that good luck chase down the. Motor noise or white noise it is sometime referred to.
When doing a stereo amp speaker install, do the speakers go wired to the amp or to the back of the stereo to the color wires?? Trying to install a radio in my boat
I just picked up a monster orion class ab 4 channel for $150. 3x40 amp fuses!!! Xtr 750.4. Before that I also had a 45 x 4 RMS amp built into my Sony head unit, same concept as alpine. Series is called Sony mex "high-power"
@@ParkerTheBassheadI'll let you know how it sounds if you are looking for a future mids,highs amp. Also have an old school rockford power t300.2 monster class ab that does like 430w per channel at 1ohm. naturally it's full range and it really does sound godlike. They'll never make em like that again. It's known as one of the most underrated Rockford amps of all times. I may be getting rid of it if you want it to run your whole system. You can hook up 4 x4ohm speakers to each channel!
how or what do i plug the RCA's into on the radio if i have my sub amp RCA's in Aux out already? or would the speaker wire on the radio go to the input of the amp which i will need to add an RCA on the end of the wire
Because I have mine hooked up and it sounds good but I feel like it could be louder and my buddy has told me it needs to be hooked up to an amp. I already have a 4 channel amp that’s hooked up to my subs..
I just impulse bought an American bass xr10! God knows I didn't need another sub as my NVX vcw 10 is perfect. I had it in a prefab and wasn't satisfied so I built a birch 1.5 cube box with a 3in aero port. it's for my wagon so I'm not into tons of weight and huge boxes which is why I took my mdf aeroport dual massive hippo 8 box out which weighed 100lbs almost. I hope what they say about the XR is true that it isa SQ version of the XFL
&Parker Dacchille hook them 6x9 up. I understand your going to upgrade but it will sound so much better and at 45 watts rms you can still use your factory speaker wire
Better speaker wire and sound deadening and foam behind the speakers and around the speaker to seal all the sound coming from the speaker, make a huge deference in sound quality!
I know this video is old and you may not remember.im literally at the same point..i just did exact same upgrade 4doors 2 tweeters but a 4channel amp..my tweeters are connected to my front door speakers as it came from factory. But im thinking of running just the tweeters off 2 channels and the remaining 4 doors off their own 2 channels...i dont know if i need crossovers for the tweeters..i watched this video and im curious as why you didn't wire your tweeters as they came in parallel with your doors speakers..did you run the tweets off the amp?or head unit?i can't decipher how you ran them.if you have a minute and can answer id appreciate it.if not i get it..thanks for the free content
Hello, If I was to get Apline tweeters for the tweeters. Than I get my Front door and my rear deck pioneers, would that have any affect on the sound ? Will it no work ? Would it even be compatible?? Am I allowed to do that? Please lmk thanks !!!
The brands shouldn’t matter as long as you everything wired correctly and your not overpowering your speakers. I have skars audio front speakers and stock rear speakers on the built in amp on my aftermarket radio, and then I’m running 2 jl audio 12”s on a power acoustik 2500 watt monoblock amp
So the original wiring for the tweeters you just tucked away? So theoretically you could still run the stock tweeters along side the aftermarket tweeters right?
Bro you jumped when those tweeters went off. I'm about to install the same ones 50w rms per channel I'm afraid it's gonna overpower my front 3 way 28w per channel.
Can't find a answer to my question anywhere.. Ya got a 4 Channel Amp.. 4 Channels.. Yet my jeep has 6 speakers. Should I disconnect the dash 3.5s? To provide more power to the 6x9s and 6.5s? Would it help? Is it worth the time?
Yeah I definitely would have used that alpine amp to run the front stage and rear doors then spliced the super tweets onto same channel as front stage or just ran them off head unit power you would be surprised the difference that would make bud.... just try it and see what you think if ya don't like it go back to how you have it now lol but it is going to really wake things up musically and there's no way you'd go back once you try it lol
@@tx1999 well for simple testing he could use the existing crossover that separates his tweeter in the 6x9's or rear component set and essentially they're just piggybacked with those tweets and that costs him nothing just time and tinkering but yes I would eventually get a set of crossovers which you can pick up fairly cheap or just another amp so he has an additional dedicated channel for them and all components are amplified and adjustable...
@Timothy holy hell my dudes... Yall are intimidating the jell out of me now,, i cant make up my mind how to go... & Ive hot my whole tahoe to do tryn to eliminate the entire bose premium factory sustem... & I'm having a piece of thing together man cuz I'm on disability and and make sure it took a 80% cut in pay for years ago when my back basically collapsed on me so anyway I'm having just pieces together you know what to do and every time I think I've got it figured out so I'll see something else and now I just don't know what the hell to do... I have got my two cerwin Vega mobile 12's in the back in a nice 3 cu. Ft. ported boxrunning off a kicker 400 and so you know I am pretty impressed for its size !.... This sux man , i cant stand not being able to enjoy my music... Its alk ive got left...
How well does this amp keep up with 2k rms on the sub amp? I have an Alpine ILX W650 pushing Kicker CS 6.5s and my 2 EVL 12s on my RP2000 straight drowns out the vocals. I plan on going to an SkV2 3500 would this keep up or would I be better off getting something bigger?
More than likely. Bose have excellent quality even for factory applications, but most factory models are low powered. Entry level Boss aftermarket with or without Amp and with an aftermarket head unit will be much better imo
Dunno why you wouldn't have also used the other two channels on that alpine amp to run your front door speakers and it would have made an incredible difference and huge improvement overall lol I was like "da-fuq is he even thinking" hahaha
Parker... come on man... power the 6.5s on the head unit and the 6x9s and super tweeters on the amp. You are really selling yourself short dude. Absolute waste of time not running them on an amp.
Ummm, yeah, NO. Why not amp them as they are not that good to begin with. I have their 6.5comp set in an 07 Xterra, and sorry but Skar speakers are not very good. They need an amp so that they can attempt to sound decent, and they seriously require a sub.
I just got an 05 grand Cherokee and I’m needing to upgrade mids and highs, would you recommend going with the skar 6x9 coax up front with the super tweeters? Or just go with a 6x9 mid driver with the super tweeters?
You're running your 6.25 and 6x9s off just the head unit?? I HOPE you make a video on running the new larger upgraded speaker wires to your new mids SOON. Oh wait, this is your old car.
Damn homie u be on point wit yo videos and different opinions for people and companies 👍🏾👍🏾💯💪🏾🙏🏾 you need yo own business ASAP someway somehow frfr if I ever have any problems I know who to hit up/ask about it all... keep it up bro continue all videos keep us surprised!!! I wanna get me some 2 12” Skar EVLs on a rp2000 amp with 4 Skar fsx Pro 6.5” loud speakers 🔊 with them Pro Audio tweeters then get a rp150.4 to all that!!! WHATS YO OPINION ON ALL THEM SKAR PRODUCTS??? I new to Skar lemme know Wzup bro!!! Appreciate it!!! Yo videos are dope I be stuck watching them!!! I was thinking bout get those tx speakers to but thought the fsx speakers instead, Gemme yo opinion on that too homie!!! I know I’m asking a lot but I Skar my car banging bruh lol good lookin
Some people argue that installing coaxials + tweeters on front would produce sound cancellations.Are you agree with that theory since I would like to try this configuration in my car and check if this would help my front soundstage.Thank you!
Then I suggest you go listen to other systems. There are MANY speaker manufacturers out there that Skar cannot even think about touching. American Bass, DS18, and Deaf Bonce. Skar is over priced trash that is made if freaking China.
Great video man. Question, I just bought a used car off a lot and noticed the audio is terrible in it. I hear the top speakers/tweeters working but the bottom large speakers on the doors not working. Is it okay to hookup a 3 way speaker and keep the original tweeters there or just buy a single component woofer on the bottom?
Idk if you still needed this but it is ok to mix some new and old speakers but make sure the ohms are higher or the same as the old speakers you are replacing so you don’t blow up the stock amp
Have 2 Skar amps and they are great. I have heard their subs and they rock, but often wondered how good their speakers compared to JL Audio and Digital Designs.
Russyl Royer I run the tx 6x8s in my doors. They sound great and have held up very well. Not high end but with tuning they are awesome little gems. Plus they have some great lower end on the mid bass.
It all depends. I have JLs high-end subs and they work better with the JL amps than other amps. The w712" is 3ohm. The slash1200v3 amp plays full power 1-4 ohm. JL is meant to run with JL amps which gets pricey quick.
JL and DD speakers have extremely solid sound quality. They're basically as good as you can get in terms of all around quality. But... They also cost like 10X as much as skar speakers lol. The day i drop $1300 on a 12" sub is the day i win the lottery.
Yo i can imagine how that sounds out there in person because with my headphones on that thing is rocking and those highs is so clean matter fact that system u got is just how i want mys to sounds i just need to get some body to make me a 20hz box
Nice upgrades I can't believe your factory speakers lasted that long lol that was ALLOT of abuse I bet it's a night and day difference in your mids and highs .IMO you should of just hooked up the 6x9's to the amp also but SUPER happy for you bro.Nxt upgrade should be some sound deadener for your back hatch and as needed in the rear and behind each door speaker you'll be surprised how much of a difference it makes .Keep up the good work homie #BASSHEADS
huge mistake if you do not have the connectors then never cut the connector completely off tap into the wire but never cut them off completely. Also run everything off the amp not just the tweeters.
Parker this video came up for me man its crazy to think I remember seeing this video when it first came out. Super proud of you man and during my whole cancer bid alot of your videos helped me get to where I am now. You have been a huge inspiration and I am super proud of how much you have come along and grown man keep up the great work us little guys are cheering you on man!
I always upgrade mids and highs first. I know kids today don't care nothing about sound quality. But I've always made it sound really good then I get the subs. I like beating as hard as possible but still sounds clean.
Wow I'm a kid I'm just 14 I love sound quality bass isnt always my focus I still need to learn what the highs and mid are I think mid are treble and highs are vocals.
I have always done the same . I am 42 now and most people are distortion impaired lol. Back when I was growing up and now. I know some younger people that have systems today and yeah, what is sound quality? 🤣 They just want it to be loud. Doesn't matter if it sounds like shit or not. My friends always want a louder system but they only invest in subs or a newer amp.
listen to this boomer
Gotta hear em lyrics... today's kids eat tidepods and end up like @4klz and think boomer is a hard ass diss 😂
Boomer lmao
System ain’t complete until you put some good mids and highs in with that 4 channel 💯🤘🏾
Real nigga shit!!!
Those tweets sound Awesome! I need these in my life!
I've ran that little alpine for years. Powers all 4 corners jbl gto 4s and 6.5s
250 watts 340 watts !!!!!!!!!!!!!
Just bought this amp and I have JBL 6.5's & 6x9's kickin around my house I think I'll throw in my big rig. Speakers are rated 50w RMS I believe so they should be ok.🤞 Anything's better than the stock blown speakers crackling when volume's up at all🙄
G59 gang 🙌🏼🤘🏽
G59 isn’t a gang
CTSound super tweeter way to go! 👍🏻
I bought the Alpine KTA-450 powered by an
Alpine-W650 running Alpine S 6.5 components & coaxial complete “Alpine” they’re great it blasts... I love that I didn’t have to run an amp kit and all the speaker wiring this little PowerPack has a PUNCH of sound it’s pretty much the same thing as the unit you have here... thanks for the videos very informative... those are some nice solder wire shrink wrap things I haven’t seen those yet n
cool man i just got my speakers too. i got infinity kappa components and coaxial speakers. i got them cuz its wired to 2.5ohms instead to the regular 4ohms
I tried that amp previously, and it was a little noisy. It had a hiss that I suppose my brain got used to, and eventually I didn't notice it; but, if I listened, it never went away. But, the music sound easily overpowers it. The punch it had was pretty impressive for being so small and with such low amp draw.
I would presume that if used only for highs that the hiss would be even more noticeable.
It could be because of a bad ground or the rca was possibly picking something up
Sounds like your RCA was near a power wire bud
What you described is a bad ground . Sometime cheap RCA's will cause that good luck chase down the. Motor noise or white noise it is sometime referred to.
When doing a stereo amp speaker install, do the speakers go wired to the amp or to the back of the stereo to the color wires?? Trying to install a radio in my boat
Good afternoon finally you did the upgrade
NICE UPGRADES bro!!!
Unfortunately SKAR doesn’t have that option any more where you can out in your vehicle info and they will tell you what speakers fit or don’t..
Those skar audio tx65 are awesome, trust me I know. 😎
Not for me, had to return mines
@@ssjdavid why?
I just picked up a monster orion class ab 4 channel for $150. 3x40 amp fuses!!! Xtr 750.4. Before that I also had a 45 x 4 RMS amp built into my Sony head unit, same concept as alpine. Series is called Sony mex "high-power"
Very nice!!
@@ParkerTheBassheadI'll let you know how it sounds if you are looking for a future mids,highs amp. Also have an old school rockford power t300.2 monster class ab that does like 430w per channel at 1ohm. naturally it's full range and it really does sound godlike. They'll never make em like that again. It's known as one of the most underrated Rockford amps of all times. I may be getting rid of it if you want it to run your whole system. You can hook up 4 x4ohm speakers to each channel!
Nice upgrade,but no sound deadener in the doors????
Can you give me the information on the twist locks and soldering heat shrink connectors? Where can I get them from and the proper name for that stuff?
Bro, my brother just gave me the same exact 2 pair of speakers and tweeters, that's insane.
whats that connecting part called ima get them. nice and ez to connect the wires
dude those Solder Seal Wire Connectors, Heat Shrink Butt Connectors are the business! 150 pieces on amazon for only 14 bux pssssh SOLD!!!!
How can I connect the set of 6×9s and set of door speakers and set of super tweeters on the 4chanel amp
how or what do i plug the RCA's into on the radio if i have my sub amp RCA's in Aux out already? or would the speaker wire on the radio go to the input of the amp which i will need to add an RCA on the end of the wire
are you using one car battery for your indoor speakers, tweeters, and subs?
If I’m just replacing door speakers, should I hook them up to an amp?
I’m wondering the same thing
Yes
So if I want to hook up my 4 door speakers and 2 tweeters to an amp would I need a 6 channel amp?
Because I have mine hooked up and it sounds good but I feel like it could be louder and my buddy has told me it needs to be hooked up to an amp. I already have a 4 channel amp that’s hooked up to my subs..
You can run 4 speakers on 2 channels but personally I just run 6 speakers on two 4 channel amps with 2 channels left over for later
if i get these same tweeters will i need to hook it up to my amp because i’m just planning on replacing my tweeters with something better
No you can hook them up to the original speaker wires
I got new speakers but my headunit just doesnt give out the power. Planning on installing an amp
Do you need the amp to use the tweeters?
need a amp for everything where is gone get the power from those things be like 200 watts a piece 20,0000 Hz
So to run an amp for the tweeters n an amp for the subwoofers i need a two channel car stereo?
So I have the SQ-6B 6.5 mids. They are not playing. Do I need and amp or is it that I have it wired wrong? Please help
Would I be able to safely run 2 super tweeters with a 300 watt mono block kicker amp?
I just impulse bought an American bass xr10! God knows I didn't need another sub as my NVX vcw 10 is perfect. I had it in a prefab and wasn't satisfied so I built a birch 1.5 cube box with a 3in aero port. it's for my wagon so I'm not into tons of weight and huge boxes which is why I took my mdf aeroport dual massive hippo 8 box out which weighed 100lbs almost.
I hope what they say about the XR is true that it isa SQ version of the XFL
Yeah I’ve hear the XR is the more musical version as well but I haven’t tested on for myself
Nice video parker! Curious as to how close you're able to get volume of tweeters to the speakers with them being on an amp?
Pretty close. I had to turn the gain on the amp way down tho
&Parker Dacchille hook them 6x9 up. I understand your going to upgrade but it will sound so much better and at 45 watts rms you can still use your factory speaker wire
Is it pretty loud with that amp
Do i necessarily need an amp if im looking to install super tweeters? 2014 maxima
Better speaker wire and sound deadening and foam behind the speakers and around the speaker to seal all the sound coming from the speaker, make a huge deference in sound quality!
Some really good highs for the price is the mtx thunder series.
lol, can get a set of super tweets @ 4 OHMs and at 200 watts rms for about $50 a pair. MTX, lol.
Did you ever figure out what the static was
Yes bad RCAs!
@@ParkerTheBasshead those super tweeters are so sensitive. I had same issues and mines was the same thing
I know this video is old and you may not remember.im literally at the same point..i just did exact same upgrade 4doors 2 tweeters but a 4channel amp..my tweeters are connected to my front door speakers as it came from factory. But im thinking of running just the tweeters off 2 channels and the remaining 4 doors off their own 2 channels...i dont know if i need crossovers for the tweeters..i watched this video and im curious as why you didn't wire your tweeters as they came in parallel with your doors speakers..did you run the tweets off the amp?or head unit?i can't decipher how you ran them.if you have a minute and can answer id appreciate it.if not i get it..thanks for the free content
Hi bro. Jst a question, is it possible if i can connect twiter directly to amplifier ?
Do you have a video of how to hook up that amp to a factory deck?
I do not but it would be just like booking up a subwoofer amp to a stock deck. You’ll need a Line Output Converter
Hi there what HPF frequency did you set the mini amp to for powering the tweeters? Cheers
Hello, If I was to get Apline tweeters for the tweeters. Than I get my Front door and my rear deck pioneers, would that have any affect on the sound ? Will it no work ? Would it even be compatible?? Am I allowed to do that? Please lmk thanks !!!
The brands shouldn’t matter as long as you everything wired correctly and your not overpowering your speakers. I have skars audio front speakers and stock rear speakers on the built in amp on my aftermarket radio, and then I’m running 2 jl audio 12”s on a power acoustik 2500 watt monoblock amp
This may be a dumb question but can you only install tweeters if you already have tweeters built in ur car?
HELP I literally have the same skar speakers and whenever I turn up my bass know the speakers distort bad
And he bumpin sb 🕺
You were covering your mic when playing the speakers.. But definitely a nice hook up
I have that same head unit. so you needed this small amp to add these tweets you couldn't just tie it in with doors?
So the original wiring for the tweeters you just tucked away? So theoretically you could still run the stock tweeters along side the aftermarket tweeters right?
Awsome bro sounds nice and clean
Bro you jumped when those tweeters went off. I'm about to install the same ones 50w rms per channel I'm afraid it's gonna overpower my front 3 way 28w per channel.
I have a gt86 and what amp do I need like I want a skar amp but is it too big and I need a watt info
Can't find a answer to my question anywhere.. Ya got a 4 Channel Amp.. 4 Channels.. Yet my jeep has 6 speakers. Should I disconnect the dash 3.5s? To provide more power to the 6x9s and 6.5s? Would it help? Is it worth the time?
Wire two of the speakers into the same channel
Yeah I definitely would have used that alpine amp to run the front stage and rear doors then spliced the super tweets onto same channel as front stage or just ran them off head unit power you would be surprised the difference that would make bud.... just try it and see what you think if ya don't like it go back to how you have it now lol but it is going to really wake things up musically and there's no way you'd go back once you try it lol
Instead of splicing you can just add a crossover
@@tx1999 well for simple testing he could use the existing crossover that separates his tweeter in the 6x9's or rear component set and essentially they're just piggybacked with those tweets and that costs him nothing just time and tinkering but yes I would eventually get a set of crossovers which you can pick up fairly cheap or just another amp so he has an additional dedicated channel for them and all components are amplified and adjustable...
True that
@Timothy holy hell my dudes... Yall are intimidating the jell out of me now,, i cant make up my mind how to go... & Ive hot my whole tahoe to do tryn to eliminate the entire bose premium factory sustem... & I'm having a piece of thing together man cuz I'm on disability and and make sure it took a 80% cut in pay for years ago when my back basically collapsed on me so anyway I'm having just pieces together you know what to do and every time I think I've got it figured out so I'll see something else and now I just don't know what the hell to do... I have got my two cerwin Vega mobile 12's in the back in a nice 3 cu. Ft. ported boxrunning off a kicker 400 and so you know I am pretty impressed for its size !....
This sux man , i cant stand not being able to enjoy my music... Its alk ive got left...
Kool bro !!
Anybody around charlotte or rock hill, ....... ( Help !!)
What song were you playing
What sample song are you playing in this video bro?
Really enjoy your content, keep it up dude.. subscribing to your Chanel
Thanks!!
What gauge speaker wire are you using?
Stock wire for the speakers and 18 for the tweeters. They don’t take much power
@@ParkerTheBasshead would 16 gauge do the trick for door speakers? Running like 50 watts rms a piece ?
How well does this amp keep up with 2k rms on the sub amp? I have an Alpine ILX W650 pushing Kicker CS 6.5s and my 2 EVL 12s on my RP2000 straight drowns out the vocals. I plan on going to an SkV2 3500 would this keep up or would I be better off getting something bigger?
Peep the midrange speakers that I run on my channel. Bass was turned off but they dont get drowned out at all when sub is on. Amp for sub is 2300w rms
@@Luminous.Dynamics those are bad ass
@@anthonyc9261
I recommend them, they get pretty loud and bass will not drown em out
Do you think these would be louder than my factory Bose?
More than likely. Bose have excellent quality even for factory applications, but most factory models are low powered. Entry level Boss aftermarket with or without Amp and with an aftermarket head unit will be much better imo
It sounds AMAZING!!! 🔊😲❗🎶🎵🎶
Dunno why you wouldn't have also used the other two channels on that alpine amp to run your front door speakers and it would have made an incredible difference and huge improvement overall lol I was like "da-fuq is he even thinking" hahaha
Name of the song please!
Do you also have a link for where you get those connectors?
The heat shrink connectors or the posi-twist connectors
@@ParkerTheBasshead both
U mentioned the 6x9s were component speakers. They are coaxial not component. A component set has seperate mid and tweet.
Shoot! Haha you’re right I get words jumbled up
Parker... come on man... power the 6.5s on the head unit and the 6x9s and super tweeters on the amp. You are really selling yourself short dude. Absolute waste of time not running them on an amp.
deVille NM why it wouldn’t get full power
Nice comment he probably didn't think about it hell i didn't. Sweet idea
Ummm, yeah, NO. Why not amp them as they are not that good to begin with. I have their 6.5comp set in an 07 Xterra, and sorry but Skar speakers are not very good. They need an amp so that they can attempt to sound decent, and they seriously require a sub.
40Cal Reef bro I’ve seen you in plenty of comments talking down on skar lmao fuck outta here we get it you don’t like them💀
@@MeetTheSLAYERskar is pretty good… 🤣 you’re geeked
I just got an 05 grand Cherokee and I’m needing to upgrade mids and highs, would you recommend going with the skar 6x9 coax up front with the super tweeters? Or just go with a 6x9 mid driver with the super tweeters?
Did you use a crossover for the tweeters? Or did they have the bass blocker/ cap
You're running your 6.25 and 6x9s off just the head unit?? I HOPE you make a video on running the new larger upgraded speaker wires to your new mids SOON. Oh wait, this is your old car.
You will definitely sound much better if you run the front stage on the Alpine. If you do please record it!!!
Nice vid!
Damn homie u be on point wit yo videos and different opinions for people and companies 👍🏾👍🏾💯💪🏾🙏🏾 you need yo own business ASAP someway somehow frfr if I ever have any problems I know who to hit up/ask about it all... keep it up bro continue all videos keep us surprised!!! I wanna get me some 2 12” Skar EVLs on a rp2000 amp with 4 Skar fsx Pro 6.5” loud speakers 🔊 with them Pro Audio tweeters then get a rp150.4 to all that!!! WHATS YO OPINION ON ALL THEM SKAR PRODUCTS??? I new to Skar lemme know Wzup bro!!! Appreciate it!!! Yo videos are dope I be stuck watching them!!! I was thinking bout get those tx speakers to but thought the fsx speakers instead, Gemme yo opinion on that too homie!!! I know I’m asking a lot but I Skar my car banging bruh lol good lookin
Some people argue that installing coaxials + tweeters on front would produce sound cancellations.Are you agree with that theory since I would like to try this configuration in my car and check if this would help my front soundstage.Thank you!
Sq guys run components(woofer & primary tweeters) in the front doors, secondary tweeters in the a pillars & coaxial in the rear most times.
Damn that sounds clean af!
Then I suggest you go listen to other systems. There are MANY speaker manufacturers out there that Skar cannot even think about touching. American Bass, DS18, and Deaf Bonce. Skar is over priced trash that is made if freaking China.
Great video man. Question, I just bought a used car off a lot and noticed the audio is terrible in it. I hear the top speakers/tweeters working but the bottom large speakers on the doors not working. Is it okay to hookup a 3 way speaker and keep the original tweeters there or just buy a single component woofer on the bottom?
Idk if you still needed this but it is ok to mix some new and old speakers but make sure the ohms are higher or the same as the old speakers you are replacing so you don’t blow up the stock amp
Parker I need your help brother.
Good vid Parker. How does it sound in person ?
Song name at 16:00?
Nice job
Have 2 Skar amps and they are great. I have heard their subs and they rock, but often wondered how good their speakers compared to JL Audio and Digital Designs.
Russyl Royer I run the tx 6x8s in my doors. They sound great and have held up very well. Not high end but with tuning they are awesome little gems. Plus they have some great lower end on the mid bass.
It all depends. I have JLs high-end subs and they work better with the JL amps than other amps. The w712" is 3ohm. The slash1200v3 amp plays full power 1-4 ohm. JL is meant to run with JL amps which gets pricey quick.
lol, you cannot compare skar to JL, lol. Not even JL's low end.
JL and DD speakers have extremely solid sound quality. They're basically as good as you can get in terms of all around quality. But... They also cost like 10X as much as skar speakers lol. The day i drop $1300 on a 12" sub is the day i win the lottery.
If it’s thick enough rip that ring off the front of the factory speaker to use a spacer.
Yo i can imagine how that sounds out there in person because with my headphones on that thing is rocking and those highs is so clean matter fact that system u got is just how i want mys to sounds i just need to get some body to make me a 20hz box
Nice upgrades I can't believe your factory speakers lasted that long lol that was ALLOT of abuse I bet it's a night and day difference in your mids and highs .IMO you should of just hooked up the 6x9's to the amp also but SUPER happy for you bro.Nxt upgrade should be some sound deadener for your back hatch and as needed in the rear and behind each door speaker you'll be surprised how much of a difference it makes .Keep up the good work homie #BASSHEADS
Yeah I’ll run the speakers off of an amp eventually. But yes it sounds so much better!
@@ParkerTheBasshead but you already have an amp sitting there hooked up with channels unused lol
@@kevinAuman1 He wants to hear how those tweeters sound for a while lol 😆
I believe on Fca products green violet is positive and green yellow is negative
Bro, install a Dsp and do a review🔥💯
I definitely might at some point!
For what? There is no foam between the speaker and the door, not to mention he might start cutting more wires that do not need to be cut.
Didn’t look like there were any screws in the tweets...
The guy really called the magnet on the back of the 6x9s a "motor" wow
A loudspeaker is a linear motor. Look it up.
Cause that's what it is called, the motor
Nice brotha nice👌👌
huge mistake if you do not have the connectors then never cut the connector completely off tap into the wire but never cut them off completely. Also run everything off the amp not just the tweeters.
We’re those ducking hotdogs at 14:50????
That is a very large tweeter. I'm surprised you were able to squeeze it in there 🤣
Sounds good bro
Soundstream LW2.240 240W 2 Channel
There is better ways to replace stock speakers cut the clip of the speaker and soder the wire on and get crimp connectors so you still have a clip
truck/SUV!!!
Walmart usually has the stuff I need on the cheap. Sounds kinda close to what I hear on your stuff. Might be worth the extra 40 dollars I'm not sure 🙄
Who's him?
We got the same car
Skar is ok for the price but Orion is the best at any price point and they are cheaper than skar.