@@My_thoughts_20the cutting may have not calloused over well enough. I have had that happen, and the cutting begins to rot and get soggy. Make sure it’s well calloused, or trim off the soggy bottom and try again. Hope this helps! 😊
I found that the bottom part of the leaves do best in water while the bottom does better in perlite (I water once every two weeks until moist not soaking). The roots love the perlite for some reason and then I transfered to soil in 3 months.
Not all cuttings take, and it takes a looooong time. I think I have one going on 5 months and all I have is 1/8 of roots. Oh well at least its not dead or yellow.
Hi great info, some other videos don’t mention about the drying part, how important is drying the new cut before propagation? Or can I get away with just plonking it in water?
Thank you. It's one of things that you do to increase the probability of it rooting, and doesn't take a lot of effort just a little patience. You might not wait for it to callous over and it might root. And next time it might not. Just a step to increase our chances. Great question by the way, I'm sure others as the same. Thanks for watching. Much appreciated.
Great demo! I love the way you explain, ans SAY what's printed in the BIG captions! I only wish you'd let captions stay up about ½ second longer because I often can't read that fast! Not to mention that means the picture is going fast, too. I can't read along AND look at what's happening simultaneously.😬 🌿🌿🌿 Very nice.
Thank you. Sorry, just trying to put as much info in the vid as possible and make it entertaining at the same time. Thanks for watching. Much appreciated.
Planting from the leaves gonna grow a wild senseveria the yellow lining will not come in the sapling, it will be dark green. To have the yellow lining need to propagate through root / bulb / steam
So it will grow? A neighbor of mine was throwing out a leaf, and I snagged it from their trash and threw it in a pot with potting mix. That was like 3 weeks ago. It looks alive. But nothing is growing yet. I love this plant. I think it’s cool looking.
CAREFUL: if you propagate this variety (Laurentii) by leaf cutting, it will lose the characteristic yellow stripe on the outside. To keep it propagate by separating the plant into several parts, leaving the leaves with root whole.
Found this out the hard way. Also stupidly, the offsprings didn't receive much light the first few years so there's bunch of thin leaves now. I bought a pretty sized, normal looking snake plant a year ago and put the older one next to it so it's no so bad anymore. Anyway, your comment should be at the top.
For how long does it take for roots to develop? Weeks or months? I have a snake plant-leaf in water and it is just brown at the bottom 😢 Should I make a ’new cut’ and try again? It’s cut in an angle
It depends on the environment. If it's brown and mushy on the cut I would try again. When you cut the leaf let it sit for about 2 days to allow the cutting time to callous. You don't always have to do this, but it will help. Good luck this time.
My sanseveria doesn't want a lot of water, the roots got rotten...I water it every other day or as the soil is dry that's the time to water it, and btw some says it shouldn't be placed on a direct sunlight, so mine is just in the meadow.
No idea if you gave up already, but the snake plant comes from very hot environments with little water. Water it once a month and give it a good sip, not every other day. Also it needs plenty of light, with direct sunlight maybe 2-4 hours a day.
What happens if you just chop the leaves 28” above the roots? A friend just sent me a pic of a box planter where they hedged Sanseveria like a boxwood shrub
@@PowerRedBullTypology Separate the leaves with roots intact, that's the only way to keep the yellow sides intact with the offspring. If you do it like in the video, the offspring always have only green leaves.
I've tried propagating in water twice but none lasted...they all got soggy...I guess I'll have to try soil...I wish the water prop would work because they usually root faster.. 🤔
@@monstrofarm I thought I did but maybe I should have let them stay out to dry over for longer ..what is the most effective amount of time to allow this?
That one probably won’t root, depending on how much rot there is. Try again and next time try to keep the soil drier and use a very well draining soil mix.
The only problem with this is that the snake plant offsprings coming from the cutting won't ever have the yellow sides. The only way to get the yellows is to separate a leaf with the roots from the root node.
Really hoping someone can help 🥲 Based on peoples experience , is it better to propagate the whole leaf or better to cut the leaf into multiple pieces?? Does one Method take longer than the other???
From my experience, I find that a leaf that has not had the top of it cut has a better chance of rooting. But when you cut it up, you increase the chances of getting a viable take and if All take you end up with more plants.
I also tried to steal it from a neighbour but now I'm posting this from my jail bench so unfortunately that didn't work well. I did get to keep the leave though and now I have this plant in my cell. I'm so thankful.
I root them in water and always seems to work with a little patience.
I also put mine in the water but they started to look like leaves are soaked in water
@@My_thoughts_20the cutting may have not calloused over well enough. I have had that happen, and the cutting begins to rot and get soggy. Make sure it’s well calloused, or trim off the soggy bottom and try again. Hope this helps! 😊
@@jaimewhitaker7655does that mean dry it out longer?
@@miles8088yes
I found that the bottom part of the leaves do best in water while the bottom does better in perlite (I water once every two weeks until moist not soaking). The roots love the perlite for some reason and then I transfered to soil in 3 months.
I stole 2 snakeplants leaves from neighbour's and now my own 2 snakeplants are growing after 3'5months 😂😂❤
Lmao
😂
I see snacks plant in my neighbour house 😂so I searched and this video recommended me 😂 I am also trying to stole but I am waiting for right moments 🤧
@@khandokeryeasha226 English.
I stole one from our neighbors roadside and now it is growing well in my pot
This is how I do it. I've had good results but it takes 6+ months. But when those pups pop up... so exciting.
I agree. It takes some time, but very rewarding. Thanks for watching.
6 Months??? 😢
Mine took 3 months
Confermo che il mio pezzetto di snake plant ci ha messo 6 mesi per fare il primo figlio
How often do we need to water it
Love your style, right to the point!❤
The 😢
Plants used to reduce illness are better then ones for show.
Not all cuttings take, and it takes a looooong time. I think I have one going on 5 months and all I have is 1/8 of roots. Oh well at least its not dead or yellow.
It does take patience.
Same.
❤❤❤❤
What type of soil?
I’m about to propagate mine like he demonstrates
Good luck.
I heard they lose the variegation when done from cuttings like this?
One of the most wanted video. Thank you so much. What is the ratio of potting mix used here?
Hi great info, some other videos don’t mention about the drying part, how important is drying the new cut before propagation? Or can I get away with just plonking it in water?
Thank you. It's one of things that you do to increase the probability of it rooting, and doesn't take a lot of effort just a little patience. You might not wait for it to callous over and it might root. And next time it might not. Just a step to increase our chances. Great question by the way, I'm sure others as the same. Thanks for watching. Much appreciated.
It's not that easy. As many of them won't grow
Practice makes perfect. Key is to control the water.
So true, I have lost several leaves.
@@monstrofarm what do you mean?
Control water means?
@@mitaly7167ike putting too much water or too little water
I think you will need the root tissues. Don't just cut leaves.
What’s the ratio of who buys the plant vs who steals the leaves to make their own?
How long should I be patient? A month? 3?6?12? Why isn't anyone specific a little
YOU MADE YOUR VIDEO JUST LIKE THE GUY FROM CREATIVE EXPLAINED! HES AWESOME! AND PRETTY POPULAR! I LOVE HIM.
Great demo! I love the way you explain, ans SAY what's printed in the BIG captions! I only wish you'd let captions stay up about ½ second longer because I often can't read that fast! Not to mention that means the picture is going fast, too. I can't read along AND look at what's happening simultaneously.😬
🌿🌿🌿
Very nice.
Thank you. Sorry, just trying to put as much info in the vid as possible and make it entertaining at the same time. Thanks for watching. Much appreciated.
]p
Valaikum
Took me 3-4 months for pups to appear.. But it's worth it
Thank you for this!
How do you disinfect the pruning shears?
Spray with Rubbing alcohol
That and wipe it clean from any visible dirt.
Planting from the leaves gonna grow a wild senseveria the yellow lining will not come in the sapling, it will be dark green. To have the yellow lining need to propagate through root / bulb / steam
yeah mine took like 1.5 years to actually grow multiple leaves
They can take a while but giving them a little fertilizer can go a long way.
what's the best soil to use?
So it will grow? A neighbor of mine was throwing out a leaf, and I snagged it from their trash and threw it in a pot with potting mix. That was like 3 weeks ago. It looks alive. But nothing is growing yet. I love this plant. I think it’s cool looking.
I will try this again, the last one dident take, 🌱🌵🌵🌿
You can do it!
this is verry informative :)
Glad it was helpful!
CAREFUL: if you propagate this variety (Laurentii) by leaf cutting, it will lose the characteristic yellow stripe on the outside. To keep it propagate by separating the plant into several parts, leaving the leaves with root whole.
Found this out the hard way. Also stupidly, the offsprings didn't receive much light the first few years so there's bunch of thin leaves now. I bought a pretty sized, normal looking snake plant a year ago and put the older one next to it so it's no so bad anymore.
Anyway, your comment should be at the top.
What’s a propagation mix?!
Can you do this with other plants?
For how long does it take for roots to develop? Weeks or months? I have a snake plant-leaf in water and it is just brown at the bottom 😢 Should I make a ’new cut’ and try again? It’s cut in an angle
It depends on the environment. If it's brown and mushy on the cut I would try again. When you cut the leaf let it sit for about 2 days to allow the cutting time to callous. You don't always have to do this, but it will help. Good luck this time.
New plants are coming out with same variegated ??
If i plant one than will it multiply?
Yes. From one cut, 1 1/2 yrs later, I now have 6 nice leaves and a healthy plant. 😊
What’s a propagation mix?
I left my the leaves cut for a week now 😅 do u think it still grow when i plant them into the soil?
Should be ok. Good luck. 🍀
@@monstrofarm thank you
What is a propagation mix?
For how many days once should we water it?
After first watering, water when soil is completely dry.
Once a month, maybe a bit sooner if you live in hot environments. Just check that the soil is dry from quite deep.
I am growing that leaf in water.... it will grow right?
Yes it should grow but will lose variegation if it has any now.
My sanseveria doesn't want a lot of water, the roots got rotten...I water it every other day or as the soil is dry that's the time to water it, and btw some says it shouldn't be placed on a direct sunlight, so mine is just in the meadow.
My snake plants are place direct sunlight. Within 1 month i got 2 babies.
Please watch my longer video on RUclips.
No idea if you gave up already, but the snake plant comes from very hot environments with little water. Water it once a month and give it a good sip, not every other day. Also it needs plenty of light, with direct sunlight maybe 2-4 hours a day.
❤❤❤
What happens if you just chop the leaves 28” above the roots? A friend just sent me a pic of a box planter where they hedged Sanseveria like a boxwood shrub
So, I’ve been told if you try to propagate a yellow sans, then it will revert back to a green. Is that your experience?
Correct as variegated snake plant when propagated by leaf cutting will revert. Try propagating by division and this won't happen. Good luck.
@@monstrofarm What does "propagating by division" mean in simple english?
@@PowerRedBullTypology Separate the leaves with roots intact, that's the only way to keep the yellow sides intact with the offspring. If you do it like in the video, the offspring always have only green leaves.
What sanseveria type is this? 😍😍
Why callous over?
It is recommended, but I have had great success not doing so. May be my other conditions allow me to do so.
I planted a snake plant leaf in a big plastic cup and I'm thinking of making holes on the bottom
I would. You need drainage.
Get the exact cup size and use that and get a pot size that size of the cup and if the pot has holes put the pot in the cup and water
What is a “propagation mix” please give links
I've tried propagating in water twice but none lasted...they all got soggy...I guess I'll have to try soil...I wish the water prop would work because they usually root faster.. 🤔
Did you let them callous or not? I don't but was curious.
@@monstrofarm I thought I did but maybe I should have let them stay out to dry over for longer ..what is the most effective amount of time to allow this?
One to two days. Like I said I don't but maybe that will help. Good luck.@@kbm4409
@@monstrofarm thank you
If i don't give bright indirect light?
It may not root or it will take longer.
I tried but its getting rot in the bottom of the cutted leaf😢
That one probably won’t root, depending on how much rot there is. Try again and next time try to keep the soil drier and use a very well draining soil mix.
hay aapka snake planner very very good
The v cut is just to get more surface area to get roots on
Whats that white thing in the soil
perlite.
So nice ❤
The only problem with this is that the snake plant offsprings coming from the cutting won't ever have the yellow sides. The only way to get the yellows is to separate a leaf with the roots from the root node.
Now it is a Dracaena
P.S: I am commenting this on 31 March,ie,just before 1st April😊
Keep continue
You can grow them in water
Yes you can. Good luck.
What is it good for other then just a plant?
Great question. They’re very good at improving the air quality in your home. 👍🪴
@@monstrofarm great thanks 😊 👍 I'll subscribe now to ur channel
Thank you. Much appreciated. 😊
Did you know you sound like ‘Creative_explained’ guy 😂
3/4 month हुआ असे करके किंतु रूट do not coming,
💚🌱💚❕‼️❕👍🏽
Thank you very much. 😊
Aku sudah melakukanya selama 2bulan dan belum tumbuh satupun
New frequency 😮
I tried this, and it didnt work😢
i'm like what the hell is propagation
I tried this three times already and each time they all died
Really hoping someone can help 🥲
Based on peoples experience , is it better to propagate the whole leaf or better to cut the leaf into multiple pieces?? Does one Method take longer than the other???
From my experience, I find that a leaf that has not had the top of it cut has a better chance of rooting. But when you cut it up, you increase the chances of getting a viable take and if All take you end up with more plants.
leaf propogation does not reproduce variation
Correct it does not. 👍
cuttings will grow but will lose the variegation
True.
Genus is Dracaena not Sansvieria
Okay
Mine all died from watering
Keep trying.
I also tried to steal it from a neighbour but now I'm posting this from my jail bench so unfortunately that didn't work well. I did get to keep the leave though and now I have this plant in my cell. I'm so thankful.
Olen
Ohhh. Let them dry for 2days. Oh Okay
It increase the probability of rooting.
Jaja, 2 years, if you have luck
🪴🪴👏🏽👍🏾
Result was 0000000😢
It's not senciveria
Stop yelling at me
Don't waste food and water