Это видео недоступно.
Сожалеем об этом.
W1209 Digital Temperature Controller Module for Various Applications
HTML-код
- Опубликовано: 17 авг 2024
- Hello Friends, WELCOME to "OneView 4 Tech".
In this video, we are talking about w1209 digital temperature module.
This is a simple and cheap device, which is used to turnON & turn OFF device based on temperature.
There are various application of this device like that AC control, Heater control etc.
you can buy this device from online market or offline market. This is very cheap & very useful.
इस वीडियो में, हम w1209 डिजिटल तापमान मॉड्यूल के बारे में बात कर रहे हैं।
यह एक सरल और सस्ता उपकरण है, जिसका उपयोग तापमान के आधार पर डिवाइस को चालू और बंद करने के लिए किया जाता है।
इस उपकरण के विभिन्न अनुप्रयोग हैं जैसे कि एसी नियंत्रण, हीटर नियंत्रण आदि।
आप इस डिवाइस को ऑनलाइन मार्केट या ऑफलाइन मार्केट से खरीद सकते हैं। यह बहुत सस्ता और बहुत उपयोगी है।
Please watch full video.
=====================================
W1209- Digital Temperature controller :-
www.amazon.in/...
/ref=cm_sw_r_tw_dp_U_x_3OR0Cb7BGD8AV
=====================================
(Settings)
1. Setting the cooling or heating parameter P0 :-
The parameter P0 has two settings, C and H. When setting to C (default) the relay will energize when the temperature is reached. Use this setting if connecting to an air-conditioning system. When set to H the relay will de-energize when the temperature is reached. Use this setting if controlling a heating device.
2. Setting the hysteresis parameter P1
This sets how much change in temperature must occur before the relay will change state. For example, if set to the default 2oC and the trigger temperature has been set to 25oC, it will not de-energize until the temperature falls back below 23oC. Setting this hysteresis helps stop the thermostat from continually triggering when the temperature drifts around the trip temperature.
3. Setting the upper limit of the thermostat parameter P2
This parameter limits the maximum trigger temperature that can be set. It can be used as a safety to stop an excessively high trigger temperature from accidentally being set by the user.
4. Setting the lower limit of the thermostat parameter P3
This parameter limits the minimum trigger temperature that can be set. It can be used as a safety to stop an excessively low trigger temperature from accidentally being set by the user.
5. Setting temperature offset correction parameter P4
Should you find there is a difference between the displayed temperature and the actual temperature (for instance, if the temperature probe is on a long run of cable) you can make minor corrections to the temperature reading with this parameter.
6. Setting the trigger delay parameter P5
This parameter allows for delaying switching of the relay when the trigger temperature has been reached. The parameter can be set in one-minute increments up to a maximum of 10 minutes.
7. Setting the high-temperature alarm parameter P6
Setting a value for this parameter will cause the relay to switch off when the temperature reaches this setting. The seven segment display will also show ‘-‘ to indicate an alarm condition. The relay will not re-energize until the temperature falls below this value. The default setting is OFF.
-----------------------------------------------------------------------------------
Long press the “SET” button to activate the menu.
(SET THE VALUES AS MENTIONED IN BRACKET)
Code Description Range Default Value
P0 Heat C/H (C)
P1 Backlash Set 0.1-15 (2)
P2 Upper Limit 110 (110)
P3 Lower Limit -39 (-39)
P4 Correction -7.0 ~ (0)
P5 Delay Start Time 0-10 mins (0)
P6 High Temperature Alarm 0-110 (OFF)
Long pressing “+/-” will reset all values to their default
=====================================
W1209- Digital Temperature controller :-
www.amazon.in/...
/ref=cm_sw_r_tw_dp_U_x_3OR0Cb7BGD8AV
=====================================
PLEASE SUBSCRIBE MY CHANNEL & ALSO SHARE
Thanks For Watching
#w1209 #temperature #oneview4tech #digitaltempmeter #temperaturemeter #fancontrol #howto #w1209module #temperaturesensor #heatsensor #temprelay
video is excellent which I looking for
Sir, your explanation was very good now I got some Idea from you thank you sir.
Allah apko khush rakhy brother tnx information k liye jazakAllah
मुझे तो L का मतलब कुछ और ही समझ आया🤣🤣🤣🤣🤣🤣🤣 LLL
लेकिन आपकी दी हुई info बहुत अच्छी है शुक्रिया
Excellent brother thank you and again explain about Xh-w3001 easy way.
Good explain sir
Sir eis ka temperature porb max 200°c hai Kaya ,
Agar eis temperature prob ko change kar ka 400°c ka temperature porb Laga du to Kaya 0 tp 400°c tak temperature control kar sakga
My device is displaying current temperature perfectly but heater is not getting on even if it is much lower temperature than my set temperature... I tried two devices and my devices are both new. Plz help...
Connection details are 12v and GND positive negative of 12v adaptor. I thru a line between 220v and a bulb holder checked it, working perfectly and then I cut one of the wire from that line and connected the two ends, one in K0 and one in K1...
Is there any mistake I am doing?
Thanks for sharing good information ☺️
❤❤❤❤
اسلام و علیکم سر میں نے انکو بیٹر میںw1209 لگایا ہوا ہے اس میں سر ایک پرابلم آرہی ہےمہر بانی فرما کے گائیڈ کر دیں شکریہ اس میں بارہ وکٹ کا ایک فین اور سو واٹ کے دو بلب لگائے ہوۓ ہیں ٹمپریچر 37.5 آٹو پر سیٹ کیا ہوا ہے اور نیچے والا 36.5پر سیٹ کیا ہوا ہے پہلے تین دن ٹھیک آن آف آٹو پر کام کرتا رہا ہے پھر تین دن کے بعد دیکھا تو فین چل رہا ہے اور بلب بند ہیں پور والے بٹن کو آف کر کے آن کیا تو دوبارہ بلب آن ہو گئے اور آٹو سیسٹم ٹھیک کام کرنے لگا دوبارہ تین چار گھنٹہ بعد پھر ایسا دوبارہ ہوا پھر ایک دن کے وقفہ سے پھر ایسے ہی بلب بند ہو جاتے ہیں اور فین چلتا رہتا ہے سر نہ بانی فرما کر راہنمائی فرما دیں شکریہ
good information sir..i request you to put a low volume of background music will make very clear. thank you..
Osm
Thank you so much
Sir aapane bahut acchi setting bataiye hai Sir 32 degree temperature per uski Puri setting likhkar please bhej den thank you Jo ya kharab hone se bachi Rahe
Sir mera bub on nahi ho raha kon si setig karni hai pl rep
Sir agar kisi wajah se thermostat hang ho jai or bulb band hi na ho to p2 ki setting krny se bulb band ho hai ga mera w1209 hang hojata or bulb ko band nayi krata temperature b bht high hojata
Supper
Boss aapney bataaya bahut achaa per ek pareyshani hai.muze ek water heater banaana hai jismi normal paani mi senser jaaey to heater on ho jaaey or paani garam honey per heater off ho jaaey plese kaisey set karu bataaey
How to draw ckt dig. Of w12op temperature controller
⁰C ko ⁰F me kaise kare isme ?????
Sir, Incubator ke liye kitna rakhna padega , details thoda dijiye
Thanks
Kindly ya btyn ka isa just agr hum temrature guage ka tor pr use kren to us ka kya trika hai
sorry sir, but mai samjh nahi paa rha hu ki aap ka question kya hai. pls comment again then i will reply you soon.
My thermostat display H and C in the middle of display can you explain why
Maka ganna tiyanna kohda
اسلام۔علیکم۔یہ کنٹرولڈ w12 مے کتنے واڈ کے بلب لگ سکتے ھین
Beck giraund music bahut he
pats name lekhaka batao kahapa pata milega please batao hamara ghara cuttack
Aap muze ye setting karke bhej sakte ho kya ?
Ham sob sting kora ha light nahi jal ra ha ka karaga ham
What is the reason that's why bulb when connected to device not showing any light.??????
Rely problam
Same problem
My temparature is blink again an again plz help me give your no plzzzx
how much current can pass threw this board
Max 10A current. Current limit depends on Relay & pcb terminal block.
How much current is needed?
Operating current is 25-35 mA & approx 65 mA while operating relay.
@@oneview4tech412 क्या ये किसी प्रजेक्ट में लगाकर इत्मीनान रख सकते हैं /भरोसे लायक होते हैं ? या फिर महँगे टेम्परेचर सेंसर १२०० रूपये के ही लेना चाहिए ?
بھیای
lak lant.
Rely सही काम नहीं करता है ये वेस्ट of टाइम
2000w loda use
how to reset w1209
press & hold both + & - button simultaneously
@@oneview4tech412 thanks brother
Can it work on mobile adapter 5 volt 2 amp??
No
Mobile number dijiye Humko board lena hai