⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/channel/UCk_lcDzEWLs5fVRYceK3-9Q ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Love the videos and it’s helped me a bunch so thank you! Also subscribed and liked the videos lol. Any recommendations to resolve an AC issue. AC turns on when the car starts for about 20 seconds or so then the display dims and the blower stops working. Not sure if it’s an ecu issue but I did notice a hole around my windshield seal so thinking that may be the issue. Any suggestions? I have the v6 base model 2006
Hi there guys. I have watched almost all of your videos about the Porsche Cayenne. I have a 2006 Cayenne S with a panoramic roof. I have an issue with my PCM 2.1 (screen switches off and on all the time). I removed the unit and tried to find any issues (like perhaps a dry solder), but was unsuccessful. The PCM has been giving issues over the past 3 years, reducing in playing time day by day, to the point where now the screen literally just reboots all the time. I have tried resetting the unit, no success. Then I reset the computer (via the lock, wait a min, open and get in and close the door, and insert key into ignition and wait minute, etc. etc. process). This also did not work. THEN, I decided to check ALL MY FUSES and pulled out all the fuses on both sides of the dashboard (while the car was off, but the battery was still connected). NOW, my panoramic roof does not want to work!!! The front angled-panel of the roof opens, the first main panel of the roof opens for one second, the two plastic flaps under the front angled-panel open halfway, and then the roof just closes again. DO I HAVE TO REMOVE THE BATTERY TERMINALS TO COMPLETELY RESET THE COMPUTER BOX NOW (possibly because I pulled the roof fuse while the battery was not disconnected)? Will really appreciate your assistance. Also, what could the problem with my PCM be? Like I said, it's been failing incrementally for a couple of years now.
Do those two relays (labeled 167 and 53) power the ECU or fuel injection at all? All I could find in the wiring diagrams involved the secondary air pump. They don't seem to do anything else...
hi i have a 2006 Porsche cayenne 4.5 my problem is that i dont have 12V on the fuelpumps only if i jump them. the relays got changed but still the same problem. i have the trouble code P 1517. what can cause the problem???
My cayenne 2004 v8 cranks but wont start, fuel pump and fuel pressure looks good, battery dies all the time but even with jumper cables it wont start, could it be a fuse or relay? Please help
The battery may be so bad that it will not start, I had to replace my battery a few months ago because it kept dying, then eventually wouldn’t start at all even with jumper cables...
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos:
ruclips.net/channel/UCk_lcDzEWLs5fVRYceK3-9Q
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Thanks for making these great videos, it’s helped me a few times now on my Porsche
I have learned a lot from your videos, thanks for making the content. Sincerely, A Single Mom Needing Her Car Repaired
Love the videos and it’s helped me a bunch so thank you! Also subscribed and liked the videos lol. Any recommendations to resolve an AC issue. AC turns on when the car starts for about 20 seconds or so then the display dims and the blower stops working. Not sure if it’s an ecu issue but I did notice a hole around my windshield seal so thinking that may be the issue. Any suggestions? I have the v6 base model 2006
👋Sir very nice explanation and information, blessings
hello, I have a 2007 porsche cayenne 3.6 v6 and it doesn't start only when the engine is hot, I changed the high pressure pump and the same problem
2005 Porsche Cayenne, V8 turbo 4.5 shifter not shifting sometimes don’t appear on the dash gear need to be paddled manually on the dang it changes.
Hi there guys. I have watched almost all of your videos about the Porsche Cayenne. I have a 2006 Cayenne S with a panoramic roof. I have an issue with my PCM 2.1 (screen switches off and on all the time). I removed the unit and tried to find any issues (like perhaps a dry solder), but was unsuccessful. The PCM has been giving issues over the past 3 years, reducing in playing time day by day, to the point where now the screen literally just reboots all the time. I have tried resetting the unit, no success. Then I reset the computer (via the lock, wait a min, open and get in and close the door, and insert key into ignition and wait minute, etc. etc. process). This also did not work. THEN, I decided to check ALL MY FUSES and pulled out all the fuses on both sides of the dashboard (while the car was off, but the battery was still connected). NOW, my panoramic roof does not want to work!!! The front angled-panel of the roof opens, the first main panel of the roof opens for one second, the two plastic flaps under the front angled-panel open halfway, and then the roof just closes again. DO I HAVE TO REMOVE THE BATTERY TERMINALS TO COMPLETELY RESET THE COMPUTER BOX NOW (possibly because I pulled the roof fuse while the battery was not disconnected)? Will really appreciate your assistance.
Also, what could the problem with my PCM be? Like I said, it's been failing incrementally for a couple of years now.
I don't see the part number or the link to the part in the description
Hello, do you have a video on the P0864 error code on a Porsche Cayenne V8, 2004?
Do those two relays (labeled 167 and 53) power the ECU or fuel injection at all? All I could find in the wiring diagrams involved the secondary air pump. They don't seem to do anything else...
Where can I purchase an ecu relay
i have no power on cluster can some body say why i check the fuse is good
I got cayenne 9pa v6 and I diagnosed it, it showed me dme, tiptronic and gateway not equipped on my scanner. Do you have any idea?
Where is the pcm located on the 3.2l v6?
hi i have a 2006 Porsche cayenne 4.5 my problem is that i dont have 12V on the fuelpumps only if i jump them. the relays got changed but still the same problem. i have the trouble code P 1517. what can cause the problem???
2006 Porsche cayenne v8 no start no power at all when turn the key no power at all need some help
How I can find my 2012 Cayenne thanks
Where's the radiator fan relay for 2006 Cayenne Turbo S
My cayenne 2004 v8 cranks but wont start, fuel pump and fuel pressure looks good, battery dies all the time but even with jumper cables it wont start, could it be a fuse or relay? Please help
The battery may be so bad that it will not start, I had to replace my battery a few months ago because it kept dying, then eventually wouldn’t start at all even with jumper cables...
How to test a relay
for v6 engine?where is the location?
WARNING BATTERY GENERATOR PROBLEM ELP
Stop saying guys in every sentence