Thank you very much for the video. My 2004 Honda Shadow Arrow needed a new front tire badly, since my local Harbor Freight was out of ATV/Motorcycle lifts, I had my local Powersports dealer replace my front tire, they said I needed new breaks (1 was @ 50% & 1 was @ 25%). I am waiting for my new pads to come in, they are supposed to be here in a few days. I can put them on myself & save the labor fee. If I had had a lift the cost savings of replacing the front tire would have paid for the $100 lift!
Happy to Help, Any questions just ask. Take a look at this video. ruclips.net/video/oPZn2DaxF_0/видео.html. Thank you for watching and your sub Tom. Let us know how this works out. Ride Safe and have a great day.
Im replacing the front brake pads on my 06 honda 750 shadow aero. When removing the original pads there was a thin, flat clip that's just over an inch big. Is that necessary to reinstall it or not? Reason for asking is on replacement pads that clip is not provided and no one mentions it on the vids. Please, your assisrance would be appreciated. Thank you.
Happy to help. That's an anti-vibration pad, if you can get it in there get it in there. Lots of time you don't have the room to reinstall. unless you buy OEM stock pads. Not necessary. I like to use them. Let us know how it works out thank you for watching and your sub marv ride safe and have a great day.
Brakes have been bad for awhile, is a 2006 aero 750vt the same consept?, also can you list me the tools is your not too busy? I've had the same bike for 10 years she has over 70000 miles. Thanks for the video as well this really helps me alot👍
@@jacobbennett6962 Happy to help. Great Bike. Standard tools and you will be all right. Any questions just ask thank you for watching and your sub Jacob. Ride safe and have a great day
Happy to help take a screwdriver and slowly open it if it's been sitting for years, maybe for a little penetrating oil, but do not cut the piston angle because that will jam it. If all fails, Crack the bleeder valve and try to expand those brake caliper pistons. Hope this helps. Thank you for all your support. Ride safe and have a great day.
Happy to help. Yes it is the same set up. Thank you for watching all your support Darwin. Drive safe and have a great day. Let us know how it works out.
Happy to help. Yes it's the same set up on your Sabor 1100. Thank you for watching and all your support f Frag Head. Let us know how it works out. Ride safe and have a great day.
@@fraghead9813 My pleasure. Just make sure you collapse the piston on your calipers all the way. You should have no problem. Ride safe. Have a great day.
2:45 i cannot for the life of me get the brake pad to fit back in here. Not sure why, it just doesn't fit back in a way that lines up with the screwhole. Cant see any sort of slot when i look in either, mostly because it's hard to see at this angle.
Remember, you could always remove the caliper and work it like that it's a little more time but if sometimes if you can't get those pistons to completely compress, you will have problems with the new pads. Remove caliper and go out that way. Let us know how it works out patience you'll get it.
@@TwoWheelRocco I actually managed to finally get in there, turned out I was just continuously missing the slot to get it in on the upper side. The particular model I have is shaped slightly different than the one in video. Did plenty of tests before riding to make sure the brakes were in fact functioning properly and nothing was loose.
pin hanger 45215-ml7-922. look at part 14. www.bikebandit.com/oem-parts/2005-honda-shadow-aero-750-vt750c/o/m151126#sch410526. Hope this helps. Ebay. www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=honda+shadow+pin+hanger.++45215-ml7-922&_sacat=0&LH_TitleDesc=0&_osacat=0&_odkw=honda+shadow+pin+hanger. Let us know how this works out.
This is similar to your set up I believe. ruclips.net/video/eA85nyjdeU8/видео.html. Hope this helps. Honda Spirits I think are chain driven. Let us know how this works out.
Happy to help. No, you do not have to bleed the brakes when you're just replacing the pads. Do not open brake lines, collapse The piston in the caliper a 100% and the job is easy. Let us know how it works out. Thank you for watching, and all your support the daydreamer. Ride safe and have a great day.
Happy to help. If your brakes worked prior to the pads they will work better with the new pads. You do not have to bleed the brakes just don't open up brake lines. Thank you for watching and your sob Ben. Let us know how it works out. Ride safe and have a great day.
@@TwoWheelRocco thanks man. Cant believe u replied. Hope all is well. If my pads still look thick enough but squeeks. U think i just have to spray brake cleen?
Yes it would, if somebody added fluid into that master. Usually the pads were out and take up that space so when you push it back. They returns to normal. But it's a good practice to take a look, I should've added that. Thank you for watching and your sub Paul. Ride safe and have a great day. That's not how it works out. Great comment.
Happy all went well. Any questions just ask. Thank you for watching and all your support. Oliver. Write safe and have a great day. Honda shadows are great motorcycles.
Sorry to hear that. If you have any questions just ask. Just make sure the Pistons in the caliper are 100% compressed. so that you have room for the new Brake Pads. Thank you for watching and I hope that helps. Ride safe and have a great day.
Thanks yeah this was my first time doing it so it was much easier to just remove the assembly so I can see what’s going on on the inside. This would be good for the second or third time down the road now I know what it looks like on the inside
Straight to the point and no rambling about how you bought the bike, did this and that like many other videos. Thumbs up bud
Happy to help. Any questions just ask. Thank you for watching and all your support Cosmo. Ride safe and have a great day.
Thank you very much for the video. My 2004 Honda Shadow Arrow needed a new front tire badly, since my local Harbor Freight was out of ATV/Motorcycle lifts, I had my local Powersports dealer replace my front tire, they said I needed new breaks (1 was @ 50% & 1 was @ 25%). I am waiting for my new pads to come in, they are supposed to be here in a few days. I can put them on myself & save the labor fee.
If I had had a lift the cost savings of replacing the front tire would have paid for the $100 lift!
Happy to Help, Any questions just ask. Take a look at this video. ruclips.net/video/oPZn2DaxF_0/видео.html. Thank you for watching and your sub Tom. Let us know how this works out. Ride Safe and have a great day.
Thanks! I just replaced front pads on my 03 Aero today and your video made it a breeze.
Happy to Help...Ride Safe.
Thanks for this - just did mine out in the driveway and it was super easy. Now for the best part - the test ride! :)
Happy to Help, Any questions just ask, Thank you for your Sub Caroline. Let us know how this works out. Ride Safe and have a great day
I'm going to change mines tomorrow. Thanks for the video
Happy to help.....Have a great day..
Thanks man your video was awesome took me five minutes to do 1999 Honda Nighthawk. Stay safe brother!
Happy to Help. Thank you for watching and your Sub. Paul. Ride Safe and have a great day.
Let me know if you have any questions.
Im replacing the front brake pads on my 06 honda 750 shadow aero. When removing the original pads there was a thin, flat clip that's just over an inch big. Is that necessary to reinstall it or not? Reason for asking is on replacement pads that clip is not provided and no one mentions it on the vids. Please, your assisrance would be appreciated.
Thank you.
Happy to help. That's an anti-vibration pad, if you can get it in there get it in there. Lots of time you don't have the room to reinstall. unless you buy OEM stock pads. Not necessary. I like to use them. Let us know how it works out thank you for watching and your sub marv ride safe and have a great day.
Thank You for watching, Any Question just ask.
Do I have to use the metal clip on plates with my new ecb brake pads
@@JayBirdNJ. No you do not. Happy to help, Any questions just let me know. Thank you for watching and your sub Jay. Ride safe and have a great day
Brakes have been bad for awhile, is a 2006 aero 750vt the same consept?, also can you list me the tools is your not too busy? I've had the same bike for 10 years she has over 70000 miles. Thanks for the video as well this really helps me alot👍
@@jacobbennett6962 Happy to help. Great Bike. Standard tools and you will be all right. Any questions just ask thank you for watching and your sub Jacob. Ride safe and have a great day
So many videos about the pads, but I really need to change a brake disc.
Hello.. how did you compress the piston back in? Thank you
Happy to help take a screwdriver and slowly open it if it's been sitting for years, maybe for a little penetrating oil, but do not cut the piston angle because that will jam it. If all fails, Crack the bleeder valve and try to expand those brake caliper pistons. Hope this helps. Thank you for all your support. Ride safe and have a great day.
Hello,is it the same set up for 2007 honda spirit 750? Anyone? Thanks
Happy to help. Yes it is the same set up. Thank you for watching all your support Darwin. Drive safe and have a great day. Let us know how it works out.
Is this the same setup for a 04 shadow sabre 1100? Im about to order pads.
Happy to help. Yes it's the same set up on your Sabor 1100. Thank you for watching and all your support f
Frag Head. Let us know how it works out. Ride safe and have a great day.
@@TwoWheelRocco thank you for the reply! I'll be doing front and back. Your video helps a ton!!!
@@fraghead9813 My pleasure. Just make sure you collapse the piston on your calipers all the way.
You should have no problem. Ride safe. Have a great day.
I learn what looking to learn. Thank u
Happy to help. Any questions just ask. Thank you for watching and your sub Nick. Ride Safe and have a great day.
2:45 i cannot for the life of me get the brake pad to fit back in here. Not sure why, it just doesn't fit back in a way that lines up with the screwhole. Cant see any sort of slot when i look in either, mostly because it's hard to see at this angle.
Remember, you could always remove the caliper and work it like that it's a little more time but if sometimes if you can't get those pistons to completely compress, you will have problems with the new pads. Remove caliper and go out that way. Let us know how it works out patience you'll get it.
@@TwoWheelRocco I actually managed to finally get in there, turned out I was just continuously missing the slot to get it in on the upper side. The particular model I have is shaped slightly different than the one in video. Did plenty of tests before riding to make sure the brakes were in fact functioning properly and nothing was loose.
Happy all worked out well. Ride safe and have a great day.
Do you know what the replacement pin is called? Mine got stripped and I'm looking for a replacement
pin hanger 45215-ml7-922. look at part 14. www.bikebandit.com/oem-parts/2005-honda-shadow-aero-750-vt750c/o/m151126#sch410526. Hope this helps. Ebay. www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=honda+shadow+pin+hanger.++45215-ml7-922&_sacat=0&LH_TitleDesc=0&_osacat=0&_odkw=honda+shadow+pin+hanger. Let us know how this works out.
@@TwoWheelRocco thank you!!! I thought I was on the right track so I appreciate the confirmation. I'll update later !
Hey Rocko do you have any videos on some drum brake installation on honda shadow spirit 1100
This is similar to your set up I believe.
ruclips.net/video/eA85nyjdeU8/видео.html. Hope this helps. Honda Spirits I think are chain driven. Let us know how this works out.
Where did you apply brake lubricant?
Clean and polish pin. 2:19 On video, I think lubrication collects dirt on your front brake pin. What do you think?
Ok cool I thought you where applying lubricant on brake pad.
Thanks
@@chrissanchez1251 Thank you for your support, Ride Safe and have a great day.
Good job, when doing a pad change like this is it necessary to bleed the brakes?
Happy to help. No, you do not have to bleed the brakes when you're just replacing the pads. Do not open brake lines, collapse The piston in the caliper a 100% and the job is easy. Let us know how it works out. Thank you for watching, and all your support the daydreamer. Ride safe and have a great day.
Hello, I don’t have to bleed the brakes?
Happy to help. If your brakes worked prior to the pads they will work better with the new pads. You do not have to bleed the brakes just don't open up brake lines. Thank you for watching and your sob Ben. Let us know how it works out. Ride safe and have a great day.
@@TwoWheelRocco thanks man. Cant believe u replied. Hope all is well. If my pads still look thick enough but squeeks. U think i just have to spray brake cleen?
@@benn2678 Scoff pad surface with 80 grit sandpaper, Clean with brake cleaner. You should be all right.
wouldnt this cause the fluid level to rise in the master cylinder?
Yes it would, if somebody added fluid into that master. Usually the pads were out and take up that space so when you push it back. They returns to normal. But it's a good practice to take a look, I should've added that. Thank you for watching and your sub Paul. Ride safe and have a great day. That's not how it works out. Great comment.
didnt see you add the break lube? was it just for the pin? Im doing my Honda Shadow Spirit
A little lube on the pin. That all I do anti seize. Hope that helps
Can anyone recommend a brand of brake pads. I have the 2004 aero 750. This will be my first brake pad swap.
And thanks in advance 🙏🏼
www.ebay.com/itm/383556344395?hash=item594dbd5a4b:g:fVUAAOSwghpextl8. Thank you for watching and your sub. I hope this helps Ebay check this link.
so just one allen key screw only, don't need to take out the caliper.
This is true...As long as it is not all corroded..Needing a good clean up.
Thanx !
Happy to help.Any questions just ask Thank you for watching and all your support Carlos . Ride safe and have a great day.
I shit you not that’s the easiest installation on replacing your front brake pads I’ve ever seen hahaha
Happy all went well. Any questions just ask. Thank you for watching and all your support. Oliver. Write safe and have a great day. Honda shadows are great motorcycles.
What size allen wrench did you use?
i beleave 6 mm Hope that helps.
Two Wheel Rocco thanks for the help.
so confusing
Sorry to hear that. If you have any questions just ask. Just make sure the Pistons in the caliper are 100% compressed. so that you have room for the new Brake Pads. Thank you for watching and I hope that helps. Ride safe and have a great day.
Thanks yeah this was my first time doing it so it was much easier to just remove the assembly so I can see what’s going on on the inside. This would be good for the second or third time down the road now I know what it looks like on the inside