First of all, THANK YOU! Your videos are straight to the point, there is no much explanation like in other tutorials. I am know how to work in autocad 2d so I do have some knowledge, but you have skipped the boring part. Once again thank you for your time and effort you have put in this course.
Note, the Rib command does not result in an intersection at either cylinder to yield a form along the pre-rib cylinder face edge, thus maintaining an external cylindrical edge, original to each cylinder. Zoom in to the new solid feature to view the discontinuity. This change is not acceptable for form continuity, and Autodesk should fix this.
The command which tells us about the joining of the two lines after converting the two planes in plane geometry, that two line is not getting extruded, can anyone help me
I go to make the line coincident and it never works, at the 5 minute or so mark. I did the red one, that was nice, this is my second one and I'm stuck.
What's your problem? Where did you get stuck? Follow the instructions carefully! I always write down every move he makes, and I also take pictures. These are very important, especially if you are a beginner.
@@richards.8465 Hey Richard, I got it... only thing is the 30, 50, and two 10's dimensions are still showing. Everything is put together. I took a break yesterday and tried it again.
@@richards.8465 hi, why he chose xz plane in the begining.. i am confused about planes only, other than that its good. could you please guide me? thanks
First of all, THANK YOU!
Your videos are straight to the point, there is no much explanation like in other tutorials. I am know how to work in autocad 2d so I do have some knowledge, but you have skipped the boring part.
Once again thank you for your time and effort you have put in this course.
iT'S so nice of you to post these tutorials. Thanks so much.
Note, the Rib command does not result in an intersection at either cylinder to yield a form along the pre-rib cylinder face edge, thus maintaining an external cylindrical edge, original to each cylinder. Zoom in to the new solid feature to view the discontinuity. This change is not acceptable for form continuity, and Autodesk should fix this.
I also am experiencing a problem connecting the two points, every time I do it results in an error
me too
@@hermawanrochmadi4776 My reply was 2 yrs ago, still not fixed?
@@glloydphilpott9630 lmao, nooope
@@cursed_etches8128 So you disagree with my statement or that it's not fixed?
Thank you for all your work teacher
Thank you for sharing this informative video!
thanks for such a easiest technique. Thanks
finally i did it. The previous 3 models are more easier than this one
Thank you God bless you.
Are you going to do big projects like solidworks
hola..podrias compartir de donde obtienes los planos ...o que libro es. Por favor. Muy bueno los tutoriales
I like it sir .
Please differentiate the use of origin and plane in inventor. Please I need it as soon as possible
спасибо за урок
The command which tells us about the joining of the two lines after converting the two planes in plane geometry, that two line is not getting extruded, can anyone help me
do you have more
Thanks for this
I go to make the line coincident and it never works, at the 5 minute or so mark. I did the red one, that was nice, this is my second one and I'm stuck.
What's your problem? Where did you get stuck? Follow the instructions carefully! I always write down every move he makes, and I also take pictures. These are very important, especially if you are a beginner.
@@richards.8465 Ok, thank you! I will try that again.
Josh 23 I'd be glad to help.
@@richards.8465 Hey Richard, I got it... only thing is the 30, 50, and two 10's dimensions are still showing. Everything is put together. I took a break yesterday and tried it again.
@@richards.8465 hi, why he chose xz plane in the begining.. i am confused about planes only, other than that its good. could you please guide me? thanks
Could you please provide the drawings in jpg for reference as ine goes along?
Can anyone tell me the function of Project geometry.
It simply automaticly draw a sketch from piece a 3D part created.
Please make vedio in hindi
ESSSStruut