SecretLab Titan 2020 XL Armrest Wobble Fix
HTML-код
- Опубликовано: 8 сен 2024
- This video shows you how to fix the dreaded SecretLab Titan 2020 XL armrest wobble
Subscribe and Smash that Bell Notification for all the Latest Crypto
●▬▬▬▬▬▬▬▬▬▬▬Social▬▬▬▬▬▬▬▬▬▬▬●
RUclips ► / @cryptoslo_official
Twitter ► / bitcoinslo
●▬▬▬▬▬▬▬▬▬▬▬Gear▬▬▬▬▬▬▬▬▬▬▬●
Official Merch: teespring.com/...
CryptoSlo Amazon Store: amazon.cryptos...
#shorts
just the video i needed too. left the wobble so long it popped off they arm lol thanks bro
Ty for showing how to get to the inner screws, my friend's broke his armrest by leaning on it and i was able to fix it all again cheers!
I did exactly the same, however that inner screw in the middle will not budge, no matter the force applied. I've probably now chewed the screw head beyond usability now 😢
Went searching for videos after I got stuck half way through taking mine apart. The central screw is fused so hard, it eventually snapped the head of my screwdriver while trying to undo it 😂
Perfect instructions I needed today when my wobbly armrest came of completely. Struggled a bit with two small steel balls, which in my case simply felt out.
You saved me so hard. Holy shit. Can't say thank you enouth. The plastic for the armrest was unfortunately broken and I was able to rebuild the pieces yesterday with a 3D printer. Thanks to you, I was able to reassemble the armrest. Like and sub for sure.
Your a life saver man, I was extremely frustrated trying to fix the dreaded wobble, it took a good 30 minutes or so only because I dropped 1 of the ball bearings and had to really search around for it, but damn near did a full overhaul of replacement parts including the seat base, thank goodness for the extended warranty
THANK YOU. Your a legend it was driving me nuts.
Great video, i left my wobble "unnoticed" so long that it literally popped off the arm rest... needless to say this helped a lot. Nothing like 2am surgery on a chair lol
You absolute legend, this is the exact video I needed. I leaned on the arm a weird way and it all fell apart! Seems the screws have gotten loose and I needed to tighten them! Thank you for this video mate it was a huge help.
greatest video i nave ever watched on youtube. THANK YOU
Ty, my 2018 its a lil different but same bolts, just tight them up and now it works like when i first bought them
Great video! Only issue im running into is that the two silver screws before you get to the 4 culprit screws are over tightened on my armrest where im starting strip the screw 😒
Awesome video. Fixed my armrest wobble in both of my labs. Wasn't really that bad but great to see the mechanics of the rests and to know what your getting into on you $500 chair is always helpful. 👌🏽 thx brother.
Fixed my problem, great video, saved the day and my frustration.
Mine didn't have a screw to remove for the top. How the hell do I get that thing off
Yeah mind doesn't either, it doesn't look like ours can be disassembled.
@@mitchmeister03 Oof, same. Mine just arrived today and there are no screws on the underside of the arm rest.
Locktite on the threads will hold them right where you need them
Thin washers on those four screws would probably stop them from getting loose again
thx this helped alot
Thanks a lot, i broke the armrest and i was able to disassemble it and remount it ❤❤
no funciona . de echo los brazos estan diseñados a si para que duren 15 años sin problemas
At the point where you have removed the center screw and say that you can remove that entire mechanism, is there anything else you have to do to lift that part off? My armrest still seems fully fixed in place, having removed that central screw. I have confirmed i have a 2020xl as well. 0:50 is where youre removing this mechanism and i cannot.
it should come up. try flat head to pry
@@CRYPTOSLO_OFFICIAL I got the same problem, after removing the center screw its still fixed in place
after some testing it seems the mechanism box needs to be slid fully down before you can lift it off just try sliding the arm rest around its normal operating directions and it will eventually slide off. be warned there is a small white triangle piece that locks the changes the orientation of the slide in 1 of 3 positions. DO NOT LOSE IT. i had to search for it. its small. you shouldnt need to bend or force anything really. if you are finding yourself stressing really hard, the metal box mechanism hasnt been slide into the right position yet.
The Center screw at 0:44 is so tight I can't get it out. The metal is soft and the screw head is deforming before the screw turns. How did you get this screw out??
if it's phillips, try a couple of flatheads to get a better grip accross the screw.
@@CRYPTOSLO_OFFICIAL For me its those last 2 screws with the black spacer, they're unreasonably tight and I can't get them out without stripping the heads as you said. Might have to get a small flat head to see if i can force them out.
thank you!
The 2 screws at 0:59 are they right hand thread? Mine from Factory are wickedly tight, and makes me question if I should try to turn them the other way. I am I'm trying lefty loosy
Use a bigger screwdriver for more torque or a flat blade across the Phillips
@CRYPTOSLO_OFFICIAL I did finally get it out after letting it soak in PB blaster for 2 days... there was loctite on the threads. I almost stripped the screw
I'm screwed, It was on so tight I accidently stripped the one screw 0_0 looks like I'm stuck with a wobbly arm XD
@@Weajy search Amazon for screw extractor, you can drill it out and replace with new screw. $10-12 bucks
@@CRYPTOSLO_OFFICIAL awesome thanks! Do you know if they used loctite? It's like impossible to move the screw 🫨
Thanks for this, for the life of me I couldn't figure out how to get those stupid little metal balls back into place. With that, the wifes chair is fixed once again.
Cool