San Diego Bassheads Car Meet | 15 Cars Featured!
HTML-код
- Опубликовано: 26 май 2024
- 18 inch subwoofers, bass demos, custom car audio builds!
Big Jeff Audio: bigjeffaudio.com/discount/DBN...
San Diego Bassheads: / 2021447841247267
March Bass Meet: • Checking out San Diego...
February Bass Meet: • Amazing Car Audio Buil...
Bass Wars (January): • Bass Wars | Car Audio ...
~~~Referral Links~~~
Amazon Storefront: www.amazon.com/shop/DaBadNewz/
Auxito LED Headlight Bulbs: www.auxito.com/Xr1hbrh7XP45PI
Big Jeff Audio: bigjeffaudio.com/?ref=DaBadNewz
~~~Contact~~~
@DaBadNewz
Instagram: / dabadnewz
Tiktok: / dabadnewz
Email: DaBadNewz@DaBadNewz.com
Team San Diego Bassheads hosts a monthly car meet for car audio enthusiast to come out and check out custom car audio builds, get demos, and swap build techniques.
In this video we check out everything from a 50s Chevy truck with two Massive Audio 12s riding between the driver and passenger, to a Chevy Silverado with four Pride S5 18s on 12k watts RMS each!
Thanks for watching! Hope you enjoyed and consider subscribing to watch more!
•••SUPPORT THE CHANNEL•••
Some links below are affiliate links, meaning I earn commissions on qualifying purchases at no extra cost to you.
~~~Coupon Codes~~~
(Use my coupon code at checkout. You get a discount, I get a commission. It's a win win!)
Auxito LED Headlight Bulbs: DBN15 (15% off) www.auxito.com/discount/DBN15...
Big Jeff Audio: DBN5 (5% off) bigjeffaudio.com/discount/DBN...
~~~Popular Videos~~~
• Build and Install 1/0 ...
• Install Pioneer Head U...
• Subwoofer Box Build fo...
• Installing a High Outp...
• Installing 80 mil Soun...
• Sound Deadening Car Ro...
• Sound Deadening Scion ...
• How to Spray Paint Pla...
~~~DaSlapBox~~~
2011 Scion xB
Audio:
Head Unit: Pioneer AVH-2600BT
Subwoofer: Fi BL18 • Subwoofer Box Build fo...
Subwoofer Amp: Sundown SCV-1500d
Subwoofer Speaker Wiring: 8ga OFC SHCA
Subwoofer Terminal Lugs: 8ga Copper Lugs, 1/2" I.D. amzn.to/3YN0qg7
Door Speakers: Pioneer TS-A1684R A-Series 6 1/2"
Power:
Alternator: Mechman 240A
Power/Ground Wiring: 1/0 OFC SHCA
Power/Ground Terminal Lugs: Riocan 1/0 AWG Ring Terminals
amzn.to/3YJ2wO2 (1/4, M6)
amzn.to/3YGFcRa (5/16, M8)
amzn.to/48g5KMR (1/2, M8)
Acoustic Treatment:
Sound Deadening: Noico 80 mil (Doors+Panels, Roof, Floor, Trunk, Center Console, Pillars) amzn.to/47HpadN
Closed Cell Foam: Noico 315 mil (Floor) amzn.to/47DomXs
Sound Deadening Roller: Lumiteco Bearings Equipped Sound Deadening Roller amzn.to/3P4bylv
Lights:
RGB Strips: ELLights (Footwells, 2 rows under sub box, under amp, around amp rack) amzn.to/47JN8VJ
Fog Lights: Auxito Q16 H11 LED Bulb, tinyurl.com/H11Q16
Low Beams: Auxito Y19 H11 LED Bulb, tinyurl.com/Y19H11
High Beams: Auxito 9005/HB3 LED Bulb, tinyurl.com/Q169005
Brake Lights: Phinlion LED amzn.to/3YZ6jap
Reverse Lights: Phinlion LED w/ Projector amzn.to/44nGOAq
Turn Signals: Phinlion LED amzn.to/47yp3kG
Dome Light: iBrightstar 31mm LED amzn.to/3P5wPeE
Map, License Plate, DRL: iBrightstar Wedge LED Bulbs amzn.to/3qFV6i4
Junkyard Finds:
Daytime Running Lights from 2013+: • Installing Fog Lights ...
Foglights + Switch + Grille: • Installing Fog Lights ...
JDM Toyota Rumion Tail Lights: • Installing JDM Tail Li... 
Авто/Мото
You're a real g in this game, never criticizing a build, understanding everyone has their budget and we are all in the bass world for the love of it. I know plenty of folks that would have not even mentioned the le shehulk kind of build.Your passion for the game shines homie, keep it up, you are a new favorite 🎶🎶🎶🎶
Damn that’s a big ass compliment man! I don’t take that lightly, I really appreciate that!
And yea man I just love cars and the DIY attitude. Everyone has their own budget, and to take it a step beyond that, everyone has different intentions with their build.
I try to judge the execution by the intention, regardless of the style/price/car/or any other variable. Did you do what you were trying? Do you like your results? And most importantly, you having fun with it?
(And obviously extra points for doing it yourself)
Thanks for those words man, these comments really help motivate me to keep making these videos.
You are definitely the sleeper... In bass videos on youtube... Everyone just posts videos... You actually tell model numbers and all... Keep up the great work. Hopefully since its hetting summertime you can pump out more videos.
Thanks man! That comment honestly really made my day because sometimes I feel like that, (not to toot my own horn or anything).
I'm just trying to bring a little production value to an area I'm passionate about.
And I'm definitely gonna try! I'm trying to hit more events and do a lot more to my car, so there should be plenty of good stuff coming.
Thanks for checking out the video, and thanks again for your feedback!
I like the layout of this video. Thanks basshead brother!!
Thank YOU for the feedback man! Definitely got more of these coming
congrats on getting monetized! keep up the good work!
Thanks man! This is just the beginning!
Bro dunno how it took this long to find you. Thought I had every rad basshead channel subscription already. Loved the monolog the whole time. Great vid man and I'll be scoping out your other vids now!
Thanks man I really appreciate that! I’m still trying to figure out how to get my shit out there, so at least it’s slowly starting to work.
Hope you enjoy some of the other content! Got more of these ones coming
hell yeah bad news, i built jesses box and did the nstall with him. glad you liked it.
Oh shit nice! It's definitely an attention grabber. I know I wasn't expecting those U18s when I first saw it. Great work man!
And thanks for checking out the video!
🤥
@@1904audio you gonna be back with it by the 9th??
Da bad news coming with the heat again! I seen a little over the top cap in the comments lmao! Good work bro you and Clay putting the city on the map
Ooooh is that what that was?? Shiiit none of my business!
And I’m trying man! The meets been popping lately so we got plenty to show the world
You do good work with these vidz! Keep em coming brother! Thanks for the feature. The LTC will eventually be called and labeled Thumper 🐰
Thanks man! And no problem, that's a clean ass build, thanks for showing it off.
Hope to see you n Thumper at Bass Wars on the 9th!
Good shit ima pull up to next one
Next one is actually a competition! At Fruhmann Motor Gallery on Sunday
Thank you for the shoutout. I highly recommend the bass processor/epicenter for your build, I can show you how to set gain with it also to avoid clipping.
No problem man! Thanks for the demos! And yea after talking to you and Alex, I think an Epicenter would be a good addition.
The bass meets over there looks dope! The scene is cool in the southern states here on the east coast, but not over by me in Ohio lol. We got slamology and that's bout it. Thanks for showing us how it goes down out in cali!
Honestly they've been growing! These last few have been a lot bigger than normal, and people have even come down from LA.
But damn really? IG will have you thinking it's some big midwest events going down every weekend. Seems like the majority of the folks who are into Bass Builds are more out that way.
Well shit man, you better start up that FB Group! I don't use FB a whole lot, but for finding out about meets and Bass events, it helps a lot.
Hope you guys get some more events out there, but in the meantime, I'll definitely keep bringing you out to our meets through the videos.
Thanks for always checking out the videos man!
I've got a bass processor hooked after my nvx dsp then to my amp. It makes all the old skool music slap hard
Yea man I think I need that! Which one are you running? Any pros and cons to it?
@DaBadNewz pros are all the settings it has. Bass knob has 2 volumes on push button to turn the bass off. No cons as of yet
Nice nice! Yea after everybody been talking to me about em, I think it’s time
I find "Mo'Murda' to be a great Bone-Thugz-N-Harmony song; the bass beat and the energy they bring in their sing-rap sets it off with their style that no one quite matches ... its like Bjork ... if you are in the mood for that artist's music/take on a genre, nothing else is really close enough to match it.
I miss the Audiovox 18" someone found and gave me and I built a box and rocked it in the back of a 88 RX-7.
Makes me want to add a big sub to the back of my CR-Z; but would like to see if I can replace the passive 8" with an amped on and keep it looking stock and not losing the entire hatch ;) (but I miss how that 18 could hit so deep; I miss the ultra-lows I got in my youth in the 90s)
Thank you for keeping the content coming; sends me back 25 years.
I'm going to make that KAC-818 30 year old mono amp that ran that 18" decades ago work its ass off again one day; 200w@4ohm, 300w@2ohm (RMS ofc) ... any deep hitting 8" that need almost no box that would like that power rating? Any 15" or 18" that only need that little power these days that would sound good? I honestly don't know how that 18" running at 200w used to hit so hard, people with real systems back then used to encourage me to go to comps.
Sorry for rambling; don't have anyone to geek out about this stuff around any longer. Always appreciate seeing someone doing it and sharing the love of the scene. Floods the memories of the ghetto installs I did at 16 vs stripping an interior down to put the wires under the carpet and run power/audio cables on different sides, etc. going through firewall instead of running it under the door weatherstrip from the corner of the hood :p Stripping wires with teeth bending like a contortionist in trunks/hatches ...
much love to all you guys for sharing positivity and helping each other; need more of that in the world.
Mo Murda is definitely another great one from them. East 1999 as a whole was fire!
And a system would sound good in that CR-Z, but yea you would lose some cargo space if you want those LOW lows. As far as infinite baffle subs, I know there are some (I feel like one was just recently floating around IG), but I honestly have no personal experience with any so couldn't even tell you where to start.
I always hear people talk about how systems used to really slam with a lot less power back in the day, and I'm always curious what the big difference is.
Anyway, thanks for checking out the video! And nothing wrong with talking bass to bass heads! That's why I post these videos. I've learned a lot through the comments on my videos and I really appreciate the passing around of knowledge like that.
Congrats on the monetization Champ! Great insight and footage!! Gunny's Knob @ 2:10 😄 👌 looks like a "decent" meet!! Thx for the insight and cool video drop
Thanks man! Been a long time coming!
And yea man he did that shit! Came out super nice.
With bass processors you want to beware from switching to the next song cause some songs need it more than the others some songs need qtr knob i have ran soundstream and now im using epicenter audiocontrol as my bass knob
That's a good point! Definitely something to keep in the back of your mind. Between the soundstream and the Epicenter, any stand out features or reasons to choose one over the other? They both sound decent?
Audio control is the og when it comes to bass restoration like the first to come out all the other companys make copys of it and sell it for cheaper your paying for brand name but alot of people argue that it sounds way better than the soundstream but if you are in a car and they ask you you wouldnt be able to tell a difference
Yea that’s kinda the vibe I get from the little bit of research I been doing. The AudioControl one is tempting since they have a lot of DSP integrated products. Just kinda seems like that type of product is their specialty rather than just another product they make.
Thanks for sharing your thoughts man!
I've got the hifonics 3.0 bass processor.. it's got clipping indicator on input and output plus u can do full range and sub at the same time.. it's decent. Works for me. Just FYI since ur looking into one
Haven't heard much about that one yet. Clip on both in and out is pretty cool. Any particular favorite/hated features?
Oh and thanks for paying attention and even offering up a new option to look into, I really appreciate that!
keep up the videos man
Thanks for the motivation! And most definitely, I'm just getting started!
I bet no one thought how are you going to get the spare tire if you have a flat lol😂
Most of the big builds don't even have spares; more space for bass! I actually have a Short on my channel where I show the process of accessing my spare (have to basically remove everything)
Ur stuff is dope, u should come out this weekend come check out the show in Vegas at Killer Sounds
I appreciate that man! I definitely plan on making it OUT to some shows in the near future. The only hard part for me is that I make most of my income on the weekends, so I have to know about shows way in advance and plan for a day off.
I'm 100% down though! Thanks for the suggestion!
I'll have to watch for the upcoming shows
I'm less than a few hours away from SD! 🤙🏼
Gotta come on down to one sometime! Next meet is June 9th, and it's a Bass Wars event, so even more builds. (I'm actually gonna meter mine for the first time, but I'm definitely not expecting much)
@@DaBadNewzGood luck tomorrow 🤙🏼. Wish I could be there gonna be in AZ with the family. Kill It!
Thanks man! Ended up doing a 145.14. I aint mad about it!
@@DaBadNewzNICE🤙🏼
Thx for rubbing it in that I missed out. Lol. Was this meet posted up somewhere to see if it was coming up?
Haha my bad!
And yea they always post the info for the upcoming meets on the San Diego Bassheads FB group. (Link in the description).
Next event is on June 9th at the Fruhmann Motor Gallery (different location only because this event is a competition).
Hope you can make it!
@@DaBadNewz Thank you sir.
No problem man!
Great content bro I really like how you explain everything I'm new to all of this stuff I have always had a system but NEVER done anything myself well I decided about a year ago to get into competitive audio and start attending shows regularly as of right now I still haven't made my first show yet BUT I'm close I literally just got my power supply out of the way last month (Autotech 240, Autotech Voltage control module, dual run to the back feeding a 29AH SCIB bank from NORTHWEST LITHIUM so I am At the point of the install process where I have to install everything and tune properly but I am running into problems left and right I was attempting to run a stock head unit/LOC and do it like that but every time I try to tune with my SMD tools I can't get any distortion to register even with everything maxed out so I am currently waiting for a new head unit, DSP and other stuff that hasn't come in yet so I'm waiting for a 15" Incriminator audio TYRANT rated for 5K RMS and I just installed a Deafbonce AAK 6k this weekend and waiting for a Deafbonce AAK 180.4 for the mids and highs and four Deafbonce Arnold's basically I am redoing EVERYTHING but I am going to need HELP to make sure everything is done right so I am going to start making videos and posting them in order to learn from the comments and who knows maybe someone else in my shoes may learn something so I am wondering if you can tell me where to read about the copyright rules etc for posting videos I've only posted a short this last weekend just to start but I want to post more this weekend
Have you hit something smaller than a show? Like a meet like in the video? Those definitely help get you exposed to the scene and all the knowledge available real quick. (There's also trial and error, but that can be real fun, or a real bitch!)
And damn for your first time doing it yourself, you're going all out! I definitely respect that enthusiasm, just make sure you take your time on the install part so everything comes out the way you want it.
And honestly, making videos and asking the community is a GREAT way to learn! I've picked up so many lil tips n tricks from people leaving comments on my videos. I definitely support that idea man, do that!
As far as your question about copyrights, in what context do you mean? Like are you asking about using music in your videos? Talking about brands? Using other people's content?
The rules are different depending on what you're trying to do and how you do it. For example: All my clips of getting demos have to be pretty short otherwise RUclips will flag the music, and I can't monetize the video, but if I don't care about having it monetized, I can still use those clips no problem.
In general, you can post whatever, you just can't make money off of it (obviously there is a lot more specific details, but that's a good thing to keep in mind).
Good luck on your build and your content creation man! Don't hesitate to hit me with any other questions you have, I'll gladly share whatever I know.
@@DaBadNewz no I have never been to a show,meet Anything I just have a love for car audio and I have been watching you guys on here having fun at the shows and got tired of not being able to have fun myself when I'm in the driveway with wires and tools etc everywhere that's my new Zen garden bro so I jumped in head first and yes I was talking about music and stuff like can I just say who the song is by and the name of the song or how do I do it where I can actually play the music without a copy right strike and I'm trying to be ready for the XS power show in July it's an hour away from me and I'm hoping the sub enclosure and numerous other things come in time to be installed properly
@derrickchoate8298 i feel you man! Well I would definitely look around on FB or IG to see if there’s anything local to you, but either way, I’ll keep bringing you out to our meets through the videos!
And as far as the copyrights, there’s actually NO way to do it other than using short clips, clips where it’s so distorted that it doesn’t pick it up clearly, or using music you have the rights to use. All that “I don’t own the rights blah blah blah” that people do is literally and completely useless.
And tbh, the copyright strikes only matter if you are trying to monetize. If you don’t mind not being monetized, the copyright strike doesn’t affect your channel most of the time (and if it will, they make it very clear to you before you even post the video).
@derrickchoate8298 I have videos on my channel right now that have copyright strikes. I don’t make anything off the ad revenue for those videos (it goes to the copyright owners instead).
@@DaBadNewz ok thanks bro I will be putting out some reviews and possibly a little installing this weekend I really don't care about making money I just want to learn so I can WIN in the lanes when I finally start hitting them
Let me know when the next one is
My bad I meant to put that in the video! Next event is on June 9th, at the Fruhmann Motor Gallery. (Different location because the next one is an actual competition, gonna be a good one to pop out at!)
Edit: I added the FB group link where they post about the events to the description.
I have an avatar stu 12 I need a good box like 1 n ur video please help
I think he had that one made at a shop but I don't even remember. You trying to DIY?
How would you rate the powerus amps in your opinion. I never heard of them.
I've never ran one myself, but honestly, every build I've seen with one has been absolutely nasty! So while I can't speak from personal experience, ALL the demos I've ever gotten from builds running these have been on the "serious competition level" if that makes sense.
If I had the kind of setup that could run 15k RMS, I would probably be looking into PowerUS as well.
@@DaBadNewz what's your preferred amp to run your subs
@omark2423 I’ve actually only ever ran Rockford, Clarion, and Sundown, so I’m not the most experienced (other than demos from other people). I really liked my RF and Sundown amps, and the D4S I have on my mids makes me think it might be worth it to check them out when I upgrade my sub amp.
I guess to really answer your question, no preference…I just kinda look for the best balance of features/price/power when I need something new.
That being said, I will probably look at D4S and Sundown first (depending on how much power I end up running).
(Currently running Sundown)
@@DaBadNewz that's what up. I like powerbass and currently am using Orion. Now I'm bout to get the salt 6k or salt 8k. You do give great feedback I tuned my amp properly because of you. Thanks and keep the videos coming.
@omark2423 I’ve heard good things from both, but I don’t think I’ve ever actually got a demo from either (although I heard some Orion subs that were pretty nasty).
And damn the SALT though?! That’s serious!
And thanks man!
I’m still trying to figure this shit out, but that feedback really does help.
I’m already working on the next one
Granted im pretty new to the audio world i was thinking about buying a machete deaf bonce single 12 box amp combo i have 6.5 kicker comp in the 4 doors in my 06 Chevrolet Silverado crew cab i lm doing a little bit at a time i don't have much money now do to a rear end car accident Nov 1st so drastically drop in money have to change my lifestyle new subscriber also does anyone have a i dea for a head unit aka car radio double din thanks I appreciate it guys Scott
I feel that! I'm doing the same with my build. Been a very slow couple years with this car.
As far as a head unit, I've always liked Pioneer, although there are some pretty good options available from all the major companies for not much money these days (at least as far as car audio goes).
Oh, and thanks for the sub!