CS SofStop Installation Instructions | Cavity Sliders Hardware Installation Video
HTML-код
- Опубликовано: 5 июл 2024
- Follow these instructions to install your Single Action or Twin Action SofStop.
Introduction 00:00
CS SofStop Versions 00:14
Minimum Door Width Requirements 00:50
The Activator 00:58
Installing the Twin SofStop 01:12
Installing your Door 04:02
Installing the Front Activator 04:46
Installing the Back Activator 06:16
Installing your SofStop with a Track Stop 07:52
Installing the SofStop for a Bi-Parting Setup 08:39
SofStop Installation Tips
Activator set too far back from the closing jamb 09:30
Activator set too close to the closing jamb 09:50
Height Adjustment in the Carriage Hanger Bolt 10:08
Learn more about the CS Cavity Slider Pocket Frame: www.cavitysliders.com/Product...
Check out House of David (04:12) on Instagram: / cqbzqc_jsha
Email: info@cavitysliders.com
Phone: (888) 466 0030
Website: www.cavitysliders.com/
Linkedin: / cavitysliders
Instagram: / cavitysliders
Facebook: / cavityslidersusa
Pinterest: / cavitysliders
Glad you have several videos on installing the Twin SofStop, and no videos on the single SofStop. Then the manual doesn’t explain it either. The manual refers you to a video of how to install a Twin SofStop. Overpriced products with not very well laid out instructions.
Hi Tom, the instructions for installing a Single SofStop is the same as the Twin SofStop, however, you will do it in one direction only.
fantastic thank you
Thanks man
💝💝💝💝💝
My question is how far from the end of the top of your door does the hardware for hanging get installed???
Hi there, if you are referring to the Mount Plate location, you can find the specifications on page 12 of our installation instructions: www.cavitysliders.com/Portals/7/PDFs/Installation%20Instructions/CavitySlider%20Kitset%20Installation%20Instructions%200823.pdf
If you have any further questions, please reach out to us at (888) 466 0030 or email us at info@cavitysliders.com.