Home Automation using ESP32 Blynk Bluetooth IR Remote | IoT Projects 2023
HTML-код
- Опубликовано: 5 сен 2024
- In this Internet of things project, I have explained how to make home automation system using ESP32 Blynk Bluetooth and IR remote control relays. You can also control appliances without internet from Bluetooth app, IR remote, and manual switches.
To try out the FREE trial version of Altium, click here - www.altium.com...
For Altium 365, click here - www.altium.com...
Get the best quality components from Octopart: octopart.com/
For this ESP32 project, I have used the FREE plan of the Blynk IoT platform and I have not used any external Bluetooth module. The ESP32 can also save the last GPIO states in NVS flash memory (EEPROM).
During this IoT tutorial video, I have covered the following topics:
00:09 Quick demo on the ESP32 IoT Project with Bluetooth.
02:38 Circuit of ESP32 IoT-based home automation system.
03:13 Setup Blynk IoT cloud for the ESP32 project.
04:19 Source Code for the ESP32 Bluetooth project.
06:01 Set up Blynk IoT app Mobile Dashboard.
06:39 Connect Bluetooth app with ESP32.
Required Components (without PCB) for the ESP32 project.
1. ESP32 DEV KIT V1
2. 4-channel 5V SPDT Relay Module
3. TSOP1838 IR receiver (with metallic casing)
4. Switches
Amazon India Affiliate links:
ESP32: amzn.to/331pohb
4-channel 5V Relay Module: amzn.to/2BQ5Y3o
Amazon United States Affiliate links:
ESP32: amzn.to/3mBjCch
4-channel 5V Relay Module: amzn.to/3r2HuJ4
Help my projects on Patreon: / techstudycell
Feel free to donate any amount: paypal.me/sdaspay
Download the Code for the ESP32 IoT project using Blynk & Bluetooth from the following article:
iotcircuithub....
Download Bluetooth App for the ESP32 Bluetooth project
drive.google.c...
Download the PCB Gerber File of the ESP32 IoT Project:
drive.google.c...
Previous Videos:
Get the HEX codes from IR remote: • Smart Home with Amazon...
Steps to program ESP32 with Arduino IDE: • Programming NodeMCU ES...
Important Links:
New Blynk IoT Cloud: blynk.cloud/da...
Important points:
1. The Bluetooth app need "Nearby Devices" permission in your mobile.
2. IR receiver sensor must have a metallic casing. Otherwise, you may face issues while trying to get the Hex code.
3. ESP32 can save the last GPIO state after power failure.
4. You can control relays with Bluetooth, switches & IR remote if WiFi is not available.
5. Install the correct version of the ESP32 board and libraries as mentioned in the code.
6. Please watch the complete video, otherwise you may face some issues.
**Please take proper safety precautions while working with high voltages.
During this Blynk tutorial video, I explained how to create a home automation system step by step. The cool thing is, you don't need any extra Bluetooth gadgets for controlling things through Bluetooth.
You can also add Blynk Automations to control the relays with the pre-defined timer.
With this ESP32 home automation project, you can control the relays without WiFi from the Bluetooth app, IR remote, and manual switches. ESP32 will automatically reconnect with the Blynk cloud when the internet comes back and the relays will turn on as per the previous states.
You can use any IR remote to control the relays, just get the HEX codes of unused IR remote buttons, and control the appliances with those buttons.
This ESP32 smart relay module PCB can be used for different ESP32 projects which I will cover in upcoming videos.
#homeautomation #iotprojects #esp32
-----------
Thanks For Watching...
✅ SUBSCRIBE ✅LIKE ✅SHARE ✅ COMMENTS
Find out more projects: iotcircuithub....
Facebook: / techstudycell
Instagram: / techstudycell
Telegram: t.me/techstudy...
-----------
-----------
WARNING:
This video is for demonstration and educational purposes only.
Each demonstration presents risks and hazards that must be fully understood before attempting.
And should be performed only by professionals
-----------
Other useful IoT projects:
Latest ESP32 projects playlist:
• ESP32 Projects
Latest NodeMCU projects playlist:
• NodeMCU Projects
Arduino Home Automation Projects playlist:
• Arduino Projects
Thanks brother you are teaching us without forcing us to pay or something else its very hard to find people like you
Lots of love from Nepal 🇳🇵
Hi brother
Thanks for sharing. I think, it is better to use EspAlexa library 2.7.0 as this is free instead of Blynk ( chargeable). I request please make a project. Second I think you are the best and very sincere to your job that’s why I request you to start a series on Home Assistant. This is truly addition knowledge for your subscribers. Thank you very much my friend.
Thanks for the feedback
Make a Super project with esp32 with these features(in 8 channel relay):
1. IR remote control
2. Bluetooth/wifi
3. Preferences.h
4. Touch sensor switch
5. Add other features which can be added
Please make a home Automation with Arduino and sim800l GSM module
Good job bro......... Please make 16 channel same project .
Is it possible to use it from anywhere in the world along with the voice commands and manual switches or the app? If possible, then please suggest how to do that.....
I admire your content and expertise. Could you please consider creating a brief video on using an ESP32 with Apple HomeKit? Your guidance would mean a lot to us.😊
I don't have any Apple device. May be in future
with Nodemcu project if power of router and Nodemcu goes off 5 or 10 times in a day in this case Nodemcu will not connect to wifi automatically in this way all projects with Nodemcu are useless.This is due coding or due to manufacturing fault?Please guide me
Have you used eeprom memory to store relay status....
Hello sir, I greatly admire your incredible work. is it possible to see the source code block for bluetooth app please? thanks ❤️
Wait. Will upload in article
Sir, could you please consider making a tutorial/video to control these relays instead with the raspberry pi but using the Arduino Iot Cloud and the API they provide for the mqqt broquer exchange
You are great sir ❤❤❤❤
Super and u r one more help Bluetooth mesh and WiFi mesh send one video
What is the difference of using built in bluetooth of esp32 and external bluetooth module? I think if we use built in, we can connect one device at a time and if we use external bluetooth module, at least 7 or 8 devices at the same time. Am I right?
Sir I'm using active High Relay Module, pls tell me in which part shuld I modify for the active High relay
Great,a very nice person
can we control this automation using Alexa or google assistant?
🤩🤩🤩nice video bro..... thanks for sharing......
Thank you too
Bhaiya mera project only wifi connected he ushke liye muje kon sa code dalna padega please bta dijiye ....project name home automation using node MCU esp32
Excelente aporte. Gracias!
Please tutorial using module SIM800L without wifi,
not all places have wifi.
Plse sir add 1 fan speed with this project without using HC-05 bt module
can i use more than 4 relays ??
While turning on the fourth switch ESP got reset what to do pls tell me
Thanks sir..
Welcome
Sir please add 1fan Regulators in this project
I made one of your projects with NodeMcu using it works well but if power goes off then Nodemcu will not connect to wifi automatically then the project is useless 😢
Hlo sir ye problem kaise solve kare
Code_ESP32_Blynk_BT_IR_4Relay_Switch.ino:38:21: error: variable or field 'button1Handler' declared void
Same problem
@@v_3farmaviary870aap ka problem solve hu ki nahi
👍👍👍
Dali control system in wifi system pls tell me
Sir, If we switched ON through mobile then is it possible to switch off by manual switch?
Yes
Esp8266 in Dali light control system in online and blutooth and WiFi how to control in 64 light
Hello sir
I have problem
Code_ESP32_Blynk_BT_IR_4Relay_Switch.ino:38:21: error: variable or field 'button1Handler' declared void
how to fix it???🙏🙏🙏
Same problem my project how to solve ❤
Dali control system in blutooth system
Please make 8 / 10 channel relay control of the same project ❤
Can i use this code with esp8266
Sir i don't want to use ir remote. In that case can I use this code
You don't have to do any changes in the code. You can use same code
Use it Alexa app connect and not use blink app .
You use blink app , we can not connecting to Alexa.
Please help and make it❤❤❤❤
Blynk and pzem
Bro make it 8 channel
All are good but we are not connect to Alexa 😭😞😭
Will make video on ESPAlexa
Thanks 🙏
@@TechStudyCell plz add IR sensor and timer also in Blynk app ruclips.net/video/CpUVssHPm_s/видео.htmlfeature=shared
I hope you understand.
Plz reply
But my esp32 dead 😢😢😢 I don't have money to buy new
sir please make 16 channel, ir remote, google assistent and not use manual switch
How to do without blynk because it is premium
How to contact you reply pls
sir how can i contact you i need to ask about your project so, pls reply