Tesla Model Y | Model 3 ⚡️ Extreme Tail Lights- Hansshow LED Aftermarket Install + Review Xtreme LED

Поделиться
HTML-код
  • Опубликовано: 8 сен 2024
  • These LED tail lights by hansshow offer a different look than the traditional stock lights by tesla. There are a couple different types of aftermarket tail lights, like the eagle eye version but I personally thought these X-treme tail lights by far look the best. These fit the rear of the tesla model 3 or tesla model Y perfectly. All cords are plug and play.
    _________________________________________
    See MORE Accessories! ⚡️ evanmichiels.c...
    X-treme Tail Lights ⚡️ bit.ly/3OrrLOk ( Use Coupon Code "TeslaEvan" )
    Fish Wire Tape⚡️ amzn.to/3zscYyH
    Socket Set ⚡️ amzn.to/3aZGXo5
    Pry Tool ⚡️ amzn.to/3onyxtL
    _________________________________________
    My name is Evan and if you are new here welcome, consider subscribing to my tesla channel to see future content like this. In this video I’ll show you how to install them as the cords and connectors are all plug and play. I’ll be installing these on my 2018 tesla model 3.
    Looking at the contents of the box, you'll see 4 pieces for both the left and right hand side including all the plug and play connectors. Some of the tools you may need are a socket wrench with a 8 mm bit, a fish tape wire to feed the cords through the trunk compartment, a pry tool, and finally a standard crescent wrench.
    X-treme appearance design with original vehicle date modeling, dynamic lines, seamless fit to the tesla. LED turn signal lamp has high brightness with movement. Brake light design forms an X for a more eye-catching design.
    Tesla Model Y | Model 3 Extreme Tail Lights- Hansshow LED Aftermarket Install + Review Xtreme LED

Комментарии • 65

  • @EMtesla1
    @EMtesla1  2 года назад +1

    *See MORE Accessories!* ⚡ evanmichiels.com/general-2
    X-treme Tail Lights ⚡ bit.ly/3OrrLOk *(Use Coupon Code "TeslaEvan")*
    Fish Wire Tape⚡ amzn.to/3zscYyH
    Socket Set ⚡ amzn.to/3aZGXo5
    Pry Tool ⚡ amzn.to/3onyxtL

  • @jorgecanales4203
    @jorgecanales4203 Год назад +1

    These go so well with the Midnight Silver color!!!

  • @EVRevolution
    @EVRevolution Год назад +1

    great job and well explained. i am thinking of getting this set for my model 3.

  • @JeffMcNeal
    @JeffMcNeal 2 года назад +1

    These look great, but I want to wait until Tesla performs the recall work on the rear wiring harness before I try installing something back there.

  • @tricky5222
    @tricky5222 Год назад +1

    Wish there was a way to keep them in night mode. Love that look alot more

  • @sorianosn
    @sorianosn Год назад +2

    Looks awesome! How bright are those backup lights for illumination?

    • @EMtesla1
      @EMtesla1  Год назад +1

      They are a little small but still can see fairly good both day and night

  • @purifiedbleach1196
    @purifiedbleach1196 Год назад +3

    Why does the brake light flash first when you put on the turn signal

    • @cuongvan4536
      @cuongvan4536 4 месяца назад

      @EM Tesla: It seems like the brake light on the driver side flashes before you turn on the turn signal?? Why is that?

  • @gli1984
    @gli1984 Год назад +1

    Hey, do you have an install video of your Hansshow power trunk? I also have a 2018 Model 3 and I’m currently installing the extreme lights. I have the hansshow power trunk installed as well but I have two chords on each side at the bottom of the trunk that are not connected to anything. Not sure if they even do anything. I believe they are purple. Awesome video btw! Hope to hear back. 👍

    • @EMtesla1
      @EMtesla1  Год назад

      Yes, its under my channel.

  • @RossParos
    @RossParos 2 года назад +2

    Nice looking #XRP lights!

  • @NishHariyani
    @NishHariyani 2 месяца назад

    Hi Evan I need your help please. I live in London UK and had these exact lights installed on my 2023 Model Y. Since the install the lights work fine but on the centre console the brake lights don’t come on in the Tesla car icon. The indicator / left right signal show on the car image when activated but if I brake or re-gen brake the side brakes or the centre brake light does not illuminate. Any ideas ? Thank you

    • @EMtesla1
      @EMtesla1  2 месяца назад

      I wonder if this is a software issue as my model 3 illuminate the lights on the screen. I'm not quite sure with the Model Y to be honest.

  • @naterob2222
    @naterob2222 2 года назад +2

    Previous Hansshow taillights had issues with the turning signals coming on when hitting the brakes on Tesla Model 3 years 2020 and older. This does not appear to be affecting your 2018 model so I wonder why that is? Did you ever experience the Hansshow Fishbone taillights for example? I am just nervous about buying them if my 2020 will still have this issue

    • @purifiedbleach1196
      @purifiedbleach1196 Год назад +1

      Do the newer ones have the issue too? 2022

    • @peshtigomark
      @peshtigomark Год назад +1

      I had trouble with the wishbones as well. After about 3 or 4 months they started freaking out. Causing havoc with autopilot cameras, cruise control, FSD you name it. Kept saying turn signal fail.

  • @Swaangin
    @Swaangin 3 месяца назад

    Hey man, appreciate your videos. Do you still have these taillights in the car? Saw another reviewer say how his got water in them and that the reverse lights do not offer, if anything, worse visibility at night while reversing.

    • @EMtesla1
      @EMtesla1  3 месяца назад

      I still have them in place! No issues and no water.

    • @Swaangin
      @Swaangin 3 месяца назад

      @@EMtesla1 how are the reverse lights at night

    • @EMtesla1
      @EMtesla1  3 месяца назад +1

      @@Swaangin They are smaller than the normal reverse lights, but a still very bright at night.

  • @murat2209
    @murat2209 Год назад

    wow - nice... but will the plug for loading also be replaced?

  • @tcsdoc
    @tcsdoc Год назад

    Your video is vague about the wires your tracing from the trunk up through the weather seal tubing. Did you fish both wires or just the left (passenger) wire? I don’t see how the other wire is routed from the trunk lid to the tail light.

    • @EMtesla1
      @EMtesla1  Год назад +1

      Both wires are feed through the weather seal. One for the right and left lights on the top trunk lid.

  • @RisumOfficial
    @RisumOfficial 4 месяца назад

    What about the fog lights?

    • @EMtesla1
      @EMtesla1  4 месяца назад

      There is a small red portion of this light that is enabled when using the fog lights.

  • @AmbuReviews
    @AmbuReviews Год назад

    Any idea what the blue and white cable actually does? Why does the left and right need to be connected?

    • @garymcgrath5938
      @garymcgrath5938 Год назад

      They need to be connected to synchronise the startup function as is often the case with fancy after-market lights. Also older Model 3s only have 1 reverse light. Connecting both lights allows older M3s to have dual reversing lights.

  • @adriannicolas8763
    @adriannicolas8763 Год назад

    I understand that is different usa model by Europe ones and wires aren't the same 🙄🤔

  • @yarbroughscott8304
    @yarbroughscott8304 Год назад

    Do you think these will work on a 2022 Tesla y performance?

    • @EMtesla1
      @EMtesla1  Год назад

      yes they work on any model 3 or model y. Please select the correct options at checkout through Hansshow. Be sure to use coupon code TeslaEvan at checkout to save money.

  • @petermiles8456
    @petermiles8456 2 года назад

    I bought some on eBay and the blinkers light up when the brakes come on :( might have to grab them from this site and hope they don’t

    • @EMtesla1
      @EMtesla1  2 года назад +1

      Yea I stay away from eBay and Alibaba

    • @MDbandit10
      @MDbandit10 Год назад

      its because they are made for the UK, USA is different. requires slight modification

  • @mattaut88
    @mattaut88 2 года назад

    Hello! Could you please tell me if these have the E-MARK Number like the OEM from Tesla? Thank you.

    • @EMtesla1
      @EMtesla1  2 года назад

      Where would this be located?

    • @mattaut88
      @mattaut88 2 года назад

      @@EMtesla1 Somewhere on the black part of the light housing. Should be visible when built in. Think it's laser engraved.

    • @EMtesla1
      @EMtesla1  2 года назад

      It’s got a DOT SAE IRF2 ST stamped on it. Not sure if this helps

    • @mattaut88
      @mattaut88 2 года назад

      @@EMtesla1 Ok, looks like not. would've been too good. ty

  • @AlienwareHuy
    @AlienwareHuy Год назад

    Does this void warranty at all?

    • @EMtesla1
      @EMtesla1  Год назад

      all plug and play and can be removed

  • @khalilbworld9140
    @khalilbworld9140 2 года назад

    Looks good man these are the best I’ve seen so far.. thanks for sharing. I have a question about the instrument cluster, I’m trying to update the version and when copy the files to the thumb drive and plug it to the display it doesn’t do anything it should start the upgrade automatically right? Any advise!! I did format it to FAT32 copied the two files there is one called update and the other one it has a long name ends with .bin I think. These the files that need to be copied? Thanks in advance.

    • @EMtesla1
      @EMtesla1  2 года назад +1

      Make sure these files are not in any folders, just directly on the thumb drive. It took mine a few moments to recognize the files to update. Hope this works!

    • @khalilbworld9140
      @khalilbworld9140 2 года назад

      @@EMtesla1 Thank Evan I’ll give it couple minutes. The vendor said wait 30 seconds and I did.. I don’t know. What part in Georgia are you? I’m in Augusta…

    • @EMtesla1
      @EMtesla1  2 года назад +1

      Savannah!

    • @khalilbworld9140
      @khalilbworld9140 2 года назад

      @@EMtesla1 I have an appointment in August with Tesla Service center Savannah I’ve been there couple of times… you think they gonna say anything if I leave the display and the yoke steering wheel on? I’m going for a noise by the front wheel

    • @EMtesla1
      @EMtesla1  2 года назад

      Please email me found under my channel.

  • @corywhyte2899
    @corywhyte2899 Год назад

    I bought a set of these off Alibaba and it didn't come with any of the wiring harness. So I got a refund on them and now am left with these without a wiring harness. How difficult would it be to make your own harness?

    • @EMtesla1
      @EMtesla1  Год назад

      I would never buy on alibaba... just go through hansshow.

  • @The1978johnny
    @The1978johnny Год назад

    you cut your truck line seal... a little WD40 and a flex fish line would have done the job or some olive oil... lol thats a 60.00$ part and all it would have cost him is time...

    • @EMtesla1
      @EMtesla1  Год назад +1

      I already had by auto trunk wires going through that... there was not enough room.

  • @CarGang4life
    @CarGang4life 2 года назад +1

    First

  • @lmaohistalkers
    @lmaohistalkers 11 месяцев назад

    Yeah looks nice but nah that’s too much tedious work. I’d end up breaking shit, patience is not my strong suit.