As a 40 year old grown man, I'm not scared to admit that the EC4P gives me the James May fizz.... I need that on my MX650 and I'd probably do multiple videos about it. Downside is that I've never made a RUclips video before... Its that exciting for me. LoL 😍❤️😂 😂
Going to be buying the full extreme 11,000watt kit this summer. Transforming my whole mx650 using your site can't wait though it's crazy I'm about to spend around 2600 on upgrades then I remember this will be better then a surron!
Yoooo im your 3rd subscriber! Can't wait to see this channel and the product line grow! Gonna be ordering this motor when its back in stock! You guys really put a lot of thought into this motor!
Sois la caña. Ya estoy deseando tener el mio, instalado. Los saltos en el rampark serán espectaculares. Y la posibilidad de cambiar ruedas e indumentaria. Y con la misma moto, al circuito de velocidad. Saludos desde España. Mucha Moto
I have a question why are all the short magnets on one side of the rotor? My small knowledge base says they should be staggered, small long, long small...? I couldn't see any kevlar is it clear? Also I dont see any balancing marks or glue are these rotor spin balanced? Also are the rotor lamination extra thin? The MY1020 motor I have has the magnets in a V style rotor much like the new Tesla motors, why not go with this V style just for the increase in max RPM? I have thrown a magnet and its not a fun experience when the rotor locks up at max rpm/speed. So i was pleasantly surprised to see a V style rotor in my new MY1020, but without internal fan as some also have. Seem a MY1020 with V style rotor and fan would be the direction these manufacturers should go. Can we see the TRUMOTO NOISY CRICKET broken down like this its nice to see the sellers doing this with there products it really helps the products sell themselves, now we just need a datasheet for us number nerds, cause nobody's butt dyno is calibrated.
Hi, I googled your company and keep getting stuff about warranties how do I get to your company because I would like to have one of these, I need about 4000w motor and ten tooth or do sprocket for 420 chain, I am building a mobility scooter/ ATV and live in area with hills, don't need speed as much as power, I am running my third 60v 2500w motor
Via my email recently about the MXR 1300 is it this motor in question ?. Being an engineer I notice there just capped bearings and not with seals in case water does get in. Order going in soon for the complete controller / motor/throttle kit. Wouldn't it be better if the windings were bound to stop vibration?. Or resin bound ?
As a 40 year old grown man, I'm not scared to admit that the EC4P gives me the James May fizz.... I need that on my MX650 and I'd probably do multiple videos about it. Downside is that I've never made a RUclips video before... Its that exciting for me. LoL 😍❤️😂
😂
I stand by Electro & Company. Great products and the best customer service.
Yes , lamination thickness alone can dramatically improve motor's power density .
Can you share a comparison to the other QS motors you sell? How will the EC4P compare to the QS90?
Going to be buying the full extreme 11,000watt kit this summer. Transforming my whole mx650 using your site can't wait though it's crazy I'm about to spend around 2600 on upgrades then I remember this will be better then a surron!
That's my plan for next year too.
I’m feeling the same way ether 3k on a SX500 or 3,500 on a Talaria X I’m really leaning towards the Razor at the moment.
@@burn1gotbeats i can fit my razer in the back seat of most cars lol
Yoooo im your 3rd subscriber!
Can't wait to see this channel and the product line grow!
Gonna be ordering this motor when its back in stock!
You guys really put a lot of thought into this motor!
Just built a 72v sx500 with your kit... so stoked on it... ill be putting your new motor on my mx650 build. Thanks for your awesome products
Nice i will get one of theese motors one day but dont have the cash at the moment.
Thank You for showing us your new motor ! 🙂
Sois la caña. Ya estoy deseando tener el mio, instalado. Los saltos en el rampark serán espectaculares. Y la posibilidad de cambiar ruedas e indumentaria. Y con la misma moto, al circuito de velocidad. Saludos desde España. Mucha Moto
Really interesting video thanks! Appreciate the effort you guys put in with everything you do 🤙
Awesome! Can’t wait to get one!
you should probably put links to the direct product listing in the description whenever you talk about a product you're selling....
I have a question why are all the short magnets on one side of the rotor? My small knowledge base says they should be staggered, small long, long small...? I couldn't see any kevlar is it clear? Also I dont see any balancing marks or glue are these rotor spin balanced? Also are the rotor lamination extra thin? The MY1020 motor I have has the magnets in a V style rotor much like the new Tesla motors, why not go with this V style just for the increase in max RPM? I have thrown a magnet and its not a fun experience when the rotor locks up at max rpm/speed. So i was pleasantly surprised to see a V style rotor in my new MY1020, but without internal fan as some also have. Seem a MY1020 with V style rotor and fan would be the direction these manufacturers should go. Can we see the TRUMOTO NOISY CRICKET broken down like this its nice to see the sellers doing this with there products it really helps the products sell themselves, now we just need a datasheet for us number nerds, cause nobody's butt dyno is calibrated.
What my1020 motor do you have? V style/ IPM is what you're referring to?
@@jahnaboi I have 3 my1020 style motors one from alfa wheels, one boma (v-style), vevor. All 72v 3000w models. Rotors have 6 magnets.
Hi, I googled your company and keep getting stuff about warranties how do I get to your company because I would like to have one of these, I need about 4000w motor and ten tooth or do sprocket for 420 chain, I am building a mobility scooter/ ATV and live in area with hills, don't need speed as much as power, I am running my third 60v 2500w motor
Www.electroandcompany.com
Love the teardown.
Excellent video presentation, thanks.
Bring them back in stock!!!! I want
The 👑
I don't care for the sprocket fit on my1020's I've had, that would make a nice comparo
Send itself to heaven 😂
How does this compare to qs138 kit you sell ???
Is there a universal go kart or buggy kit?? I need this 🔥
Would it be possible to limit max speed with these? Thinking about converting my vespa pedal moped to electric
Yes but you limit speed with your speed controller it's like the brains of the operation. You have a battery a speed controller and a motor.
Awesome product bro….💯💯💯
Make an Axial Flux motor please.
Any idea when you will have the EC4P Brushless Motor back in stock?
bruh i know ive been waiting too
Via my email recently about the MXR 1300 is it this motor in question ?. Being an engineer I notice there just capped bearings and not with seals in case water does get in. Order going in soon for the complete controller / motor/throttle kit. Wouldn't it be better if the windings were bound to stop vibration?. Or resin bound ?
Ima just stick to the my1020 it has been pretty good so far
your product is not on aliexpress?
Is it usable with any ESC?
Would this motor be good in a go-kart? Seems like a direct competitor to a modded Honda clone engine that are commonly used in karts.
Is there a way to run the Extreme Kit on the Mototec ETM chassis or will you guy’s be bringing out a kit that can reach 55- 60mph for those bikes ?
Can I use it on 16 inch wheel bike
Can we get a 3 speed switch in the kit
HI I Have a old crf 450 2007 , would this kit fit
Continuous output?
How many pole pairs does a my1020 have?
ITS A LOT MORE EXPENSIVE TOO
just take a look inside DENSO electric steering motor !! japanese quality !!
do you ship to Europe?
180c 😱
How much for the ecap-6078 thanx