Wow to my surprise I've already subscribed..my fiance just almost completely my collection by ordering this beauty!! I guess I'll get myself the traxxas bandit vxl gotta have it those things skat..I have the infraction with 1650kv combo and the typhon with the 2200kv combo..a nitro tmax ,hpi revo,hpi rs4...I'm good...thanks for p posting!! From Georgia...go DAWGS
Nice. 👍. My 22c takes off sideways. I think what's going on is this: 1-6500kv motor (big powerful) 2- need thicker oil in diff to keep it tracking straight. Oil in there now feels weak. 3- traxxas has TSM. LOSI does not have gyro (because it's not like legal )
Hi. My losi 22s does launch sideways unless careful on take off. Running 5000 mah on 2s is so fast . IC5. 2.5 million weight in diff did not help much. I ordered a sky rc stand alone gyro. Will see how it goes when installed
@Nitrous Fed Films. I have a stock Losi 22s. If you can provide a list of the settings needed to get the car to run 2.55 to 2.65 seconds on the GNSS please feel free to share. I am also using the stock radio that came with it. Thank you for making this video.
Working on a slash with maclan/drk 6600kv. Wrecked 1st drive with left rear blowout, good times. Grabbed some beadlocks belted pro lines, and gonna give it a shot. My carbon drag slash is running 6500tp on a copperhead 10, rotor ron 4.5 turn drag master hole shot on an xr10, and dr10 on mamba monster 6s and 4400tp. Any tips for drk appreciated. Only time I got today was 3.41 but spinning from jump till blowout.
You said you unlimited the front' did you take the internal spacer out of the front? Just picked up a roller and put my DRK 3.5 setup in. On a sealed blacktop track, I'm struggling to make it down. Was running 60/80, gonna try your spring and oil setup. Thanks for the tip. 2.55 is damn fast. Fasted I've seen a stocker go at the track was 2.60. You must have it dailed perfectly.
I also went with that Malibu body , which motor and esc is in ur no prep 22s , also what’s another motor, esc, gear ratio etc setup u have tried for the 22s or recommend in a finished kit version Dr10 I just need electronics and spur/pinion gear ratio setup to tryout to run faster then RTR stock Dr10 electronics gear ratios etc I’m new to the Drag racing style any help on electronics, gearing that I can try would help out. Thanks and keep up good work on future and rest of ur videos.
This is pretty impressive. I’ve been watching RC dragracing now for a month on RUclips and this is something definitely I am seriously interested in. Looking for people who will give me honest information. I need to purchase a car and get started this is obvious. I don’t know whether I should buy a Losi Traxxas or team associated ? Everyone has an opinion. Just wondering your recommendations. Thanks Dan
Associated has a great aftermarket offering. Drag race Concepts makes absolutely everything for it. Traxxas also has great aftermarket offering. The associated and the Traxxas come with very weak Motors though. The Losi comes with a 6500 KV motor that can outrun both of them out of the box. The Losi chassis is aluminum which is very rigid and helps very much to keep the car straight in the chassis not to tweek. There are pros and cons to all of them the Losi is harder to get parts for but not that bad
Depends on what your into losi best i thimit already comes with upgrades i got the yellow truck version also bought rtr dr10 not the kit...its basic an Lotta room for upgrades can't beat losi 60mph right out the box with 3s or 47 to 50 with 2s losi way to go feel free to get back i go way back with rc...still have my original 80's Tamiya frog an blackfoot
I would like some help on how to soften up the suspension to get better hook up. I have gold for 68 Ford F1 169 Camaro out of the box. They are just way too stiff and uncontrollable. I would appreciate any tips. Thank you.
nice! my buddy just bought one and we are having a heck of a time getting it to launch straight. the hobby shop said to lock up the rear diff but im not sure that the correct way?
Just picked up one on Xmas. Verry quick when it can go straight. Need help with that . All bone stock any special pinion gear suggestions?? Thanks for the help
I can hear you doing a burn out before your runs. Are you using carpet? Are you still running a slipper clutch? Besides treating with WD40, is this completely dry tire? My best time is 2.65 but my consistency is way off.
whats the best shock holes to be using front and rear? im slowly creeping up on the suspension just cant quite get it to go straight consistently..also whats a good shock oil weight?
@nitrousfedfilms I've been having trouble getting this car to hook up and go strait. I see your running traxxas springs and de tires! Im running reactions and stock shocks and springs. What weight shock oil do you run/recommend? Any help is greatly appreciated!
I just changed over to reactions. The trick is to sand them with 80 grit paper. I install them on my 4x4 slash, pull the trigger and hold the sand paper on them lightly on the surface and the sidewalls. Then treat them with wd40 every night. 100 weight oil in the rear with traxxas punk progressive springs.
man i so need help if someone could help or you buddy i would appreciate. 23 pinion with 84 spur and cuts out half track. i feel its low voltage cut off but any thoughts appreciate.
@@brushk27 84/20 spur pinion. 100 weight oil in rear shocks. 32.5 in front. Traxxas pink progressive slash springs. Punch on 4 timing on 8. RevTech 220c battery. DE street outlaw tires clay compound. That's it.
See the total destruction of my Losi here.
ruclips.net/video/h3c6iE6EOXQ/видео.html
Im just getting started and the losi 22s 69 camaro is my first drag car your videos help me alot thanks.
You've done an amazing job on that body!!!
Thank you for posting!! Big help!! Losi for life!! I went with the hobbywing setup!!
Just ordered one so ill probably be asking a bunch of questions lol thanks for the detailed videos
Yes sir. Thanks for watching
Great info and nice car I just got one. Gonna make those changes thanks for the info. Appreciate that.
Is that body looks sick. very good job buddy
Wow to my surprise I've already subscribed..my fiance just almost completely my collection by ordering this beauty!! I guess I'll get myself the traxxas bandit vxl gotta have it those things skat..I have the infraction with 1650kv combo and the typhon with the 2200kv combo..a nitro tmax ,hpi revo,hpi rs4...I'm good...thanks for p posting!! From Georgia...go DAWGS
Love your car I have same one with stang body but still going hard left at launch
Nice. 👍. My 22c takes off sideways.
I think what's going on is this:
1-6500kv motor (big powerful)
2- need thicker oil in diff to keep it tracking straight. Oil in there now feels weak.
3- traxxas has TSM. LOSI does not have gyro (because it's not like legal )
Hi. My losi 22s does launch sideways unless careful on take off.
Running 5000 mah on 2s is so fast . IC5.
2.5 million weight in diff did not help much.
I ordered a sky rc stand alone gyro. Will see how it goes when installed
Very nice job. Thanks for sharing and good luck
Good review of this! I’d love to see and in depth video on a slash
Will do!
That second launch tho... dayum 😳
Thing leaves like a nitrous car!
@Nitrous Fed Films. I have a stock Losi 22s. If you can provide a list of the settings needed to get the car to run 2.55 to 2.65 seconds on the GNSS please feel free to share. I am also using the stock radio that came with it. Thank you for making this video.
How you get it dialed in so good I’m currently working on mine tryina get to go straight…
Damn fast. Can't wait to start upgrading mine.....
Thanks. 2.55 at 53mph
Got a hobbywing max10 esc and 5400kv on mine with losi aluminum shocks so far. But can't keep traction
@@pjburcham5938 what tires?
Unfortunately still on the stock ones for now. What tire could u recommend?
love the videos just orded a losi 22s
Working on a slash with maclan/drk 6600kv. Wrecked 1st drive with left rear blowout, good times. Grabbed some beadlocks belted pro lines, and gonna give it a shot. My carbon drag slash is running 6500tp on a copperhead 10, rotor ron 4.5 turn drag master hole shot on an xr10, and dr10 on mamba monster 6s and 4400tp. Any tips for drk appreciated. Only time I got today was 3.41 but spinning from jump till blowout.
Nice ..I'm waiting to get mine ..great video man nice info
Thanks man
Car looks sick 🔥
Thank you
Nice looking car bro……
Yessssir! Nice hits fam, looking good 💪🏾💯
Yo thanks coach
Nice one brother mines sub 2second but far far from stock
1.99?
You said you unlimited the front' did you take the internal spacer out of the front?
Just picked up a roller and put my DRK 3.5 setup in. On a sealed blacktop track, I'm struggling to make it down. Was running 60/80, gonna try your spring and oil setup. Thanks for the tip.
2.55 is damn fast. Fasted I've seen a stocker go at the track was 2.60. You must have it dailed perfectly.
I still have the limiters in the front. I took them out and it had to much travel and wheelied to much
Good to info
I also went with that Malibu body , which motor and esc is in ur no prep 22s , also what’s another motor, esc, gear ratio etc setup u have tried for the 22s or recommend in a finished kit version Dr10 I just need electronics and spur/pinion gear ratio setup to tryout to run faster then RTR stock Dr10 electronics gear ratios etc I’m new to the Drag racing style any help on electronics, gearing that I can try would help out. Thanks and keep up good work on future and rest of ur videos.
This was when it was stock. I ran a DRK and a 3.0 Trinity after that
I just got into rc drag racing, are you still making videos
Not very often
Look for me on Facebook. Brooks Waldrop
That cars bad ass!
Hey did u make that front chin spoiler or buy it...THAT RIDE IS AWESOME..!!!
BC Race Cars on Facebook
If you work on it hard. You can make it faster in box stock. At my track I have run a 2.15 @ 52. We can not run that wing it has to be stock
I would really like to know how! I can't seem to get past the 2.5's
This is pretty impressive. I’ve been watching RC dragracing now for a month on RUclips and this is something definitely I am seriously interested in. Looking for people who will give me honest information. I need to purchase a car and get started this is obvious. I don’t know whether I should buy a Losi Traxxas or team associated ? Everyone has an opinion. Just wondering your recommendations. Thanks Dan
Associated has a great aftermarket offering. Drag race Concepts makes absolutely everything for it. Traxxas also has great aftermarket offering. The associated and the Traxxas come with very weak Motors though. The Losi comes with a 6500 KV motor that can outrun both of them out of the box. The Losi chassis is aluminum which is very rigid and helps very much to keep the car straight in the chassis not to tweek. There are pros and cons to all of them the Losi is harder to get parts for but not that bad
Depends on what your into losi best i thimit already comes with upgrades i got the yellow truck version also bought rtr dr10 not the kit...its basic an Lotta room for upgrades can't beat losi 60mph right out the box with 3s or 47 to 50 with 2s losi way to go feel free to get back i go way back with rc...still have my original 80's Tamiya frog an blackfoot
I would like some help on how to soften up the suspension to get better hook up. I have gold for 68 Ford F1 169 Camaro out of the box. They are just way too stiff and uncontrollable. I would appreciate any tips. Thank you.
great video. I know this is an old video but do you remember what spur and pinion were you running still with the stock motor and esc? thanks
nice! my buddy just bought one and we are having a heck of a time getting it to launch straight. the hobby shop said to lock up the rear diff but im not sure that the correct way?
So those rear shocks are just about solid ? Seem to just barley move. But seems to hook up!
Losi likes it stiff in the back
Hey, new to the channel. You mentioned getting the wing from bc race cars but I can’t find there web site. Do you have a link you can put up??
@bcracecars on facebook. Brent Matthews
Just picked up one on Xmas. Verry quick when it can go straight. Need help with that . All bone stock any special pinion gear suggestions?? Thanks for the help
She looks and runs amazing! Are the stock rear tires ok or should I upgrade
Upgrade. DE for no tire prepping. Reactions for tire prep
What are the tips to hit them numbers? What gearing you run?
I can hear you doing a burn out before your runs. Are you using carpet? Are you still running a slipper clutch? Besides treating with WD40, is this completely dry tire? My best time is 2.65 but my consistency is way off.
I have been struggling this year getting the car to go straight and fast can you give me some help.
whats the best shock holes to be using front and rear? im slowly creeping up on the suspension just cant quite get it to go straight consistently..also whats a good shock oil weight?
What type of gear setup were you running on that Malibu, if you don’t mind me asking you sir? Spur & Pinion?
84/20
just got two drag and like to now how to tun the esc
Nice
Thanks
@@nitrousfedfilms5597 your welcome
Are you using the pink slash rear springs front and back? Are fronts?
Yes both front and back
@nitrousfedfilms I've been having trouble getting this car to hook up and go strait. I see your running traxxas springs and de tires! Im running reactions and stock shocks and springs. What weight shock oil do you run/recommend? Any help is greatly appreciated!
I just changed over to reactions. The trick is to sand them with 80 grit paper. I install them on my 4x4 slash, pull the trigger and hold the sand paper on them lightly on the surface and the sidewalls. Then treat them with wd40 every night.
100 weight oil in the rear with traxxas punk progressive springs.
What controller are you using?
man i so need help if someone could help or you buddy i would appreciate. 23 pinion with 84 spur and cuts out half track. i feel its low voltage cut off but any thoughts appreciate.
84/20
I'm curious: Did you belt the rear tires. or is the 3d inserts
How do I find the company that makes the wing? I didn’t come up with anything
BC Races Cars on Facebook
I have a similar set up but I’m thinking I can put a Trinity 2.5 motor on it you think that’s a good idea
What ESC are you going to run?
I’m really not sure which one I can run
on ypur revtec batt..what plug end did you go with
hey man whats better out the box the losi 22 or a traxxas drag slash or the dr10 better meaning reliability/power
Losi
@@nitrousfedfilms5597 could of said like a couple weeks ago i bought the drag slash :(
@@nitrousfedfilms5597 and broke it instantly lol
And what gearing your using
84/20
What's the fastest you have gone with the stock system
2.38 on Porta tree timing system
Do you have traxxas pink springs in the front?
yes sir
Car yanks to the right at lunch what can I do to fix that? Nee to the hobby thanks
Did you change the gear oil?
Yes 500,000
👊👍
TRAXXAS front shock frt. & rear?
Losi shocks just Traxxas Springs
I can’t keep mine straight off of the line
Are you running the stock limiters on the inside of the shocks?
Yes sir
Also which DE tires are you running
Clay
Do anyone know where I can purchase upgraded driveshafts for the Losi 22s truck
Are you using your slipper or locking it down
Slipper
What Pinion and spurs should I go with
84/20
OK so I took the Losi ESC and motor out of the Losi and put it in the DR 10 and I can’t seem to get it up to 53 what do you think the issue is is
What is your gearing in the dr10?
87/24
How do you get it to launch like that without losing traction?
My losi 22s truck isnt going very straight,what tires do u rec?
Is it stock?
What battery do you use
Zapper 2s 3p
What shocks are you running? Stock??
Stock
With traxxas progressive springs. 100 weight in rear 50 in front
Stock springs?
Traxxas pink progressive slash
Where did you get the rear wing ?
BC Race Cars
What is your gearing
84/20
Mine dives hard right on the staring line when I floor it. Any suggestions to make it go straight?
Put more preload in the right rear. Shim the shock to be stiffer on that side
@@nitrousfedfilms5597 thank you i was having the same issue.
@@nitrousfedfilms5597 how much preload should be added or is it add till it stops doing it cause my losi is doing this exact same thing
@@99naSvt keep adding it until you see it actually go a little left then remove a small amount
Alright cool..also what's a good wheelie bar height to use when using the stock wheelie bar?
Get the wheelie bar adapter here
www.ebay.com/itm/174789958338
you are going 2.55 with a 2S?
Yes. RevTech trinity 220c 7.4 2s
@@nitrousfedfilms5597 impressive !!! what else you using i need this set up thanks
@@brushk27 84/20 spur pinion. 100 weight oil in rear shocks. 32.5 in front. Traxxas pink progressive slash springs. Punch on 4 timing on 8. RevTech 220c battery. DE street outlaw tires clay compound. That's it.
But the slogan is no prep 🤔