This man didn’t only make a bike check but he described every part on the bike like a champion. The whys that are so important for kids to know, he mentioned them. Great bike check Matt!
maybe its not the hub, but other things that hold your cranks back from spinning.. -chain tension too tight -cranks too tight -bb bearings tacoed -chain toasted -sprocket completely worn down whatever it may be this might help you out lol
@@eddielalowski4425 then maybe open it up and check if you blew any bearings? or check if theres dirt inside and clean it up.. Dont forget to put in a little bit of grease before closing it again because otherwise it could explode lol
@@likamuuk yea truth I check my hub once a month and everything internally is doin pretty adequate besides my driver. I had an issue with my driver a couple months ago where the spring clip on the outside in-between the teeth and the metal piece that hits the frame and slides over the axle popped out and my driver got weird and the two pieces moved around from each other a little more than they are supposed to. After warrantying it and putting in my brand new driver, my cranks spun even less and then that spring broke again and it went back to how it was before. I feel like its a common issue bc of how easily it happened to me twice but I don’t know.
@@ashlunframpton1826 oh ok word thanks. i havnt had a freecoaster in like 15 years, i used to have the KHE geisha when it first came out and u had to take that bitch apart to adjust the slack...
I was gonna pick up a wethepeople hybrid hub once they were back in stock, but that odyssey prototype hub really caught my eye 👀 I had a clutch v1 and it couldn’t crankflip for shit 😂 also, it lasted a week before the plastic slack spacer cracked.
You gotta chill bro you shouldn’t be breaking the plastic slack adjuster after a week? The only way you’re doing that if is you’re not used to a free coaster and constantly slamming on your pedals with full force… I ain’t ever heard of anyone breaking that after one week…
@@lukasstipp_bmx I’m sorry what? 70lb? Then you would’ve had to of been like 8 or something? How would you be breaking it in the first place cause no kid that young is breaking something like that…. Also slamming doesn’t have to do with your body weight? If you’re doing big gaps on a free coaster, and there’s no slack, the clutch is fully engaged, than you landing hard will turn your pedals a bit. Landing that hard on a free coaster will break the plastic adjuster. If you’re doing gaps on a coaster you need to make sure you’re not fully engaged cause that can fuck up a clutch too. Like I said the only way you’re breaking that is if you’re new to a free coaster
This man didn’t only make a bike check but he described every part on the bike like a champion. The whys that are so important for kids to know, he mentioned them.
Great bike check Matt!
Bmx thanks 🥰🥰🥰🥰🥰🥰🤝🤝🤝🤝🤝
We need a sneaker collection video from him, bro always got the fresh dunks on
Give him a raise. 6 min bike check where he actually talked about stuff
well that's a proper bike check
Clean description of that clean steed Matt. The off mix match colors scheme is cool. Matching Dunks for bike and outfit. Proper $teez!
Prolly my favorite VIBE in a bike check. This is fun, and makes me like bmx more. You go Matt 👍💪
One od my favorite bike checks
That rear hub gave me goose bumps whens he flicked them
2 years late but wtf 😂 Wish I didn't have 3 spare Clutch V2 after watching this. This one spins faster than my cassette
Best bike check ever done, well done man lol.
Im riding his Mixtape frame these days,best frame I've ever been on
This is exactly how a bike check should be done! Great job and damn! Just found my favorite new stem to hahahaha
I agree, well done on the bike check!!!
I needed this advice on parts thanks for making this
Clutch v3?
I HOPE they call it something, ANYTHING else lol that’s corny asf
I want that coaster 😭
This man can sell
Soooo when’s this coaster dropping?
What’s the name of his rear hub
It’s the Odyssey Clutch Pro
Hi I’m Matt Nordstrom n I just tore all the riders in the usl w a broken foot
Bmx thanks ❤❤❤❤🤝🤝
Man i really hope odyssey makes that prototype hub in cassette form as well 😍 my antigram does not let my cranks spin like that
maybe its not the hub, but other things that hold your cranks back from spinning..
-chain tension too tight
-cranks too tight
-bb bearings tacoed
-chain toasted
-sprocket completely worn down
whatever it may be this might help you out lol
@@likamuuk thx dude those definitely do contribute to my situation but my hub doesnt spin very well either.
@@eddielalowski4425 then maybe open it up and check if you blew any bearings? or check if theres dirt inside and clean it up.. Dont forget to put in a little bit of grease before closing it again because otherwise it could explode lol
@@likamuuk yea truth I check my hub once a month and everything internally is doin pretty adequate besides my driver. I had an issue with my driver a couple months ago where the spring clip on the outside in-between the teeth and the metal piece that hits the frame and slides over the axle popped out and my driver got weird and the two pieces moved around from each other a little more than they are supposed to. After warrantying it and putting in my brand new driver, my cranks spun even less and then that spring broke again and it went back to how it was before. I feel like its a common issue bc of how easily it happened to me twice but I don’t know.
@@eddielalowski4425 ok thats wheird. Then you cant do anything about it I guess :,(
What's the little white thing on the coaster hub?
Thats a bolt to tighten the slack of the coaster. On the clutch coaster there is chrome thing covering it.
@@ashlunframpton1826 oh ok word thanks. i havnt had a freecoaster in like 15 years, i used to have the KHE geisha when it first came out and u had to take that bitch apart to adjust the slack...
How many times did he say: you aint got a worry 😅??
I was gonna pick up a wethepeople hybrid hub once they were back in stock, but that odyssey prototype hub really caught my eye 👀
I had a clutch v1 and it couldn’t crankflip for shit 😂 also, it lasted a week before the plastic slack spacer cracked.
You gotta chill bro you shouldn’t be breaking the plastic slack adjuster after a week? The only way you’re doing that if is you’re not used to a free coaster and constantly slamming on your pedals with full force… I ain’t ever heard of anyone breaking that after one week…
@@KryueII lmao I weighed like 70 lbs at the time. I doubt it had anything to do with being to hard on the hub
@@lukasstipp_bmx I’m sorry what? 70lb? Then you would’ve had to of been like 8 or something? How would you be breaking it in the first place cause no kid that young is breaking something like that…. Also slamming doesn’t have to do with your body weight? If you’re doing big gaps on a free coaster, and there’s no slack, the clutch is fully engaged, than you landing hard will turn your pedals a bit. Landing that hard on a free coaster will break the plastic adjuster. If you’re doing gaps on a coaster you need to make sure you’re not fully engaged cause that can fuck up a clutch too. Like I said the only way you’re breaking that is if you’re new to a free coaster
Cool ❤️
Grips are on backwards
Nintendo switch grips
Idk why Odyssey doesn't just start making frames. All their components are dope , I'd bet they'd make the best frames.
You heard about Sunday?
@@franrawer5555 are their frames made by Odyssey? I know they use a lot of Odyssey components on their completes.
@@franrawer5555 I honestly haven't paid much attention to bmx since like 2011. I was on drugs.
Does anyone know how tall matt nordstrom is???
Me as a poor BMX rider:as you can see this is my unknown brand stem and all the parts are unknown brand thank you
Raleigh Burner pisses all over this 🔥
I am sold I need that coaster please drop it lol
Your colors are port and starboard. That way we know whether you’re comin’ or goin’. Whaddaya know about that.
whats up with Sunday dustcap lol
got a fit one ill send ya
Great bike check but did anyone else notice the capped CURB?! Wtf. Lol
Is anyone else bothered that his chain is loose or is it just me being OCD about it
Perfect for quick crankflips
his chain being loose doesn't matter considering the slack in the freecoaster makes up for it
@@SteezyBros yes, i realised that i was dumb. I didn't fully watch the video when i wrote that 😂
Compa me gusta su baika
California
Tiene los crancks alrevez el que tiene en la derecha dice LHD que se supone debería ir en la izquierda XD
I didn't know NGHTMRE rides bmx lol