Rotation Distance Calculator - www.service-uplink.de/esteps_cal/calculator.php SOVOL Klipper Screen Case Model - cults3d.com/:1593050 ◽Quick copy/paste for those interested. [PID] PID_CALIBRATE HEATER=extruder TARGET=215 [E-STEPS] G91 followed by G1 E50 F60
Truly excellent info. Just setup my Klipper interface to my SV06 last night. Your video couldn't have been more helpful in getting my machine tuned and my confidence in the interface established. Well done!
There is not that much content around about the Sovol Klipper Screen specifically so thank you for making your contribution with these videos! I got myself a SV06 Plus with Klipper Screen from last Black Friday sales. It's been an interesting journey up to now, not without its problems but I think i've finally gotten them sorted out and can start focusing on printing big stuff. (I had bearing and warped bed issues but Sovol support sent me replacements.) The Klipper Screen has been fantastic, indeed completely plug & play and I was surprised how easy it is to configure Klipper by just editing the easy to read config file and doing a quick reboot. And the WIFI! OMG I love the wifi. Being able to control your printer and send stuff to it wirelessly instead of messing around with SD cards is fantastic and the single reason I wanted Klipper Screen in the first place. I have been wondering if it would be possible to control two Klipperized printers with it,like you can with Raspberry Pi's and even the BTT Pad 7. Does anybody have any idea? It seems there is almost half of the RAM available at least when I'm running it, some ~45%.
I'm glad you got it to work! I was going to make a "shorts" video on hooking one up. I had the same thing happen where it didn't work at first. I just rebooted and it worked.
That was to keep the hot end temperature stable because I've changed my part cooling fan. If you change yours or notice that your printing temperature isn't holding fairly steady, it's a good idea to do this.
I haven’t taken that step yet. I’m a 3d printer virgin. I’ve been looking into it for the last few weeks and overdosining on how it all works. Resin still trips me out. Was a complete mystery or magic before I looked it up. Bambu a1 I really like but the sv06 is so cheap from Amazon but worried about the extra hassle that the a1 seems to have way over the sovol So sitting on the fence right now and happy to watch more vids. You remind me of old tony. So nice work on the vids. Really nice.👍
Thanks 🙂 I appreciate you watching! I hear you. They're both good printers, but each has its pros and cons. I'm looking at the SV08 now, myself. I'm sure whichever one you choose, you'll be happy.
Rotation Distance Calculator - www.service-uplink.de/esteps_cal/calculator.php
SOVOL Klipper Screen Case Model - cults3d.com/:1593050
◽Quick copy/paste for those interested.
[PID] PID_CALIBRATE HEATER=extruder TARGET=215
[E-STEPS] G91 followed by G1 E50 F60
Truly excellent info. Just setup my Klipper interface to my SV06 last night. Your video couldn't have been more helpful in getting my machine tuned and my confidence in the interface established. Well done!
Awesome! Glad it helped! 😀
I love your video editing. Cut scenes. Background music and voice over. Really nice video 👍
Thank you 😁
There is not that much content around about the Sovol Klipper Screen specifically so thank you for making your contribution with these videos!
I got myself a SV06 Plus with Klipper Screen from last Black Friday sales. It's been an interesting journey up to now, not without its problems but I think i've finally gotten them sorted out and can start focusing on printing big stuff. (I had bearing and warped bed issues but Sovol support sent me replacements.)
The Klipper Screen has been fantastic, indeed completely plug & play and I was surprised how easy it is to configure Klipper by just editing the easy to read config file and doing a quick reboot. And the WIFI! OMG I love the wifi. Being able to control your printer and send stuff to it wirelessly instead of messing around with SD cards is fantastic and the single reason I wanted Klipper Screen in the first place.
I have been wondering if it would be possible to control two Klipperized printers with it,like you can with Raspberry Pi's and even the BTT Pad 7. Does anybody have any idea? It seems there is almost half of the RAM available at least when I'm running it, some ~45%.
Thanks so much for this vid on how to properly tune SV06. Sovol should have included instructions like this, or linked to your video!
Thanks for the kind words ☺️
Would you please do a video about getting a USB camera to work with the Sovol Klipper screen?
@@Avel
Never mind the USB cam video. Yesterday I tried to set it up, with no luck. Today I turned the printer on and the cam works!
I'm glad you got it to work! I was going to make a "shorts" video on hooking one up. I had the same thing happen where it didn't work at first. I just rebooted and it worked.
thanks for this video, was a great help
Thanks for watching!
Thank you. Perfect timing as I just replaced my klipper screen cause I bricked it with an update.
What’s the pid step you did for?
That was to keep the hot end temperature stable because I've changed my part cooling fan.
If you change yours or notice that your printing temperature isn't holding fairly steady, it's a good idea to do this.
I haven’t taken that step yet. I’m a 3d printer virgin. I’ve been looking into it for the last few weeks and overdosining on how it all works. Resin still trips me out. Was a complete mystery or magic before I looked it up. Bambu a1 I really like but the sv06 is so cheap from Amazon but worried about the extra hassle that the a1 seems to have way over the sovol
So sitting on the fence right now and happy to watch more vids. You remind me of old tony. So nice work on the vids. Really nice.👍
Thanks 🙂 I appreciate you watching!
I hear you. They're both good printers, but each has its pros and cons. I'm looking at the SV08 now, myself. I'm sure whichever one you choose, you'll be happy.