Superb video brother. Explained everything in a short and sweet video. Is the process same for NOVEC 1230 as well? Please make a video on that as well. Thank you again for this great video.
Hi, excellent video. I'm from Brazil and we don't have many FM200 videos like yours. I saw that you did a preliminary sizing of the pipe diameter but I would like to know how you do the final dimensioning of the pipes? Do you use any software? What is the equivalent length of the nozzles? Thanks for listening.
I have one doubt as you said in your video fm-200 room temperature should be minimum 21 degree Celsius is it acuat room temperature or its a design temperature?? & if the physically room temperature is more than 20 then what will happen & keeping room temperature less means that to keep agent in cooling environment??
1. 7:55 Bhai pipe ki thickness se 90° elbow aur jo baaki hardware h unke corresponding length ka kya matlab h. jaise isi case m 50mm pipe ke corresponding 90° elbow m length 1.68m h. iska kya matlab h bhai 2. 8:07 yaha aapne 2inch ke corresponding values li h. agar pipe thickness zyada ho to phir kya kre? yaha to 3 inch tak ki values h.
Question-1: Pls clarify the slide again which is Pipe and other hardware fittings length. As we can see in attached video for this slide you have mentioned to install 2 inch pipe we need 5.1 feet 90 degree elbow, 2.45 feet 40 degree elbow here my question is we will use elbow where there is a change of axis for example x to y axis. otherwise it can be change due to increase of height for axis. pls clarify it for me. Quwstion-2: I am confused for step-6: Other system component. pls describe this slide again.
I have checked my slide, mentioned data is as per standard, but sometime we need to change as per requirement, You can contact with your OEM, I think they will guide you properly
FM200 is banned now a days in forgien countries but not anywhere . In india it is available. Data center customer prefers novec 1230 or inergen. And conventional nozzles ( brass) are hazardous to server's HDD due to their noise level . That's why acoustic nozzles are invented.
@@Ansari29 I mean what are the factors will affect the cylinder pressure getting low?my cylinder pressure is low now our client wants to know why it get low? Thank you for ur reply
Hi, excellent video. I'm from Brazil and we don't have many FM200 videos like yours. I saw that you did a preliminary sizing of the pipe diameter but I would like to know how you do the final dimensioning of the pipes? Do you use any software? What is the equivalent length of the nozzles? Thanks for listening
Superb video brother. Explained everything in a short and sweet video. Is the process same for NOVEC 1230 as well? Please make a video on that as well. Thank you again for this great video.
Thanks for your comment.
Ok I will make videos on Novec.
FM200 PPM Video
ruclips.net/video/t1RLfdKJOg4/видео.html
Water Leak Detection System
ruclips.net/video/Y4ZeFd9T4Jk/видео.html
Water Leak Detection System Testing & PPM
ruclips.net/video/AI9e8yle8WE/видео.html
Water Leak Detection System Testing & PPM
ruclips.net/video/AI9e8yle8WE/видео.html
Excellent video
Thank you, pls share my videos in your company group
ما شا اللہ الله لا قوة الا بالله
جزاك الله خيرا ء
Thanks bro...is formula ke baare mai mujhe pta tha but exactly calculation nhi maloom tha but today I got to know ...Great keep it up nice video...
Thanks for your comment
THANKS BRO
Thanks for your comment 😊
Pls share my videos in your company group
thanku so much sir
Most welcome, pls share my videos in your company group.
@@Ansari29 sure sir
❤️❤️❤️❤️😘😘😘 super 👍👍👍👍👍
Thanks for your comment 😊
Good presentation
Thanks for your comment 😊
Pls share my videos in your company group
@@Ansari29 Sure :)
mashah Allah very good way of talking its very easy to understand...
zazakallah
Thanks for your comment 😊
Pls share my videos in your company group
Very nice good explanations
Thank you for the helpful information 😊
EXCELLENT EXPLANATION BROTHER......
Thanks for your comment 🙂
Watch all my videos releted to Fire alarm it will help full for you.
htt ps://ruclips.net/video/sotRPYUNQU0/видео.html
Types of sprinkler and their
Super video brother. Simple the best & clear explanation. i shared it on my LinkedIn profile
Thank you so much 😊
Request you to please check all my videos & share🙏
@@Ansari29 sure will do it. If u r on LinkedIn pl share the link to get connected
Ok, thanks for guiding
Very well explained.✌️
Thanks dear
Please access control k upar video banaiye
Yes Sure, I will try...
Hi, excellent video. I'm from Brazil and we don't have many FM200 videos like yours. I saw that you did a preliminary sizing of the pipe diameter but I would like to know how you do the final dimensioning of the pipes? Do you use any software? What is the equivalent length of the nozzles? Thanks for listening.
Good one
Assalamualaikum.
Fanatics video information
Walykum Assalam brother
Please share my videos in your company group 🙂
Thanks for your comment
kindly make a video about co2 system.
Yes, I will
Pls make video on water sprinkler system!
Designing and commissioning.
Yes Sure
Also HVAC!
Nice one 👍
Thanks for your comment.
Please share video in your groups
Bhai aap bohot ache ho
Thank you 😊
FM200 | Ravel RE-25AR Panel wiring 🔥
ruclips.net/video/_6q0ursNZa4/видео.html
@@Ansari29 hello sir plz share your contact no
@@ajitmane341 send your query to ansari2991@gmail.com
I will try to give you solution.
Superub 👍
Water Leak Detection System Testing & PPM
ruclips.net/video/AI9e8yle8WE/видео.html
Your video helped me a lot! Thank you!👍👍
Thanks for your comment
Water Leak Detection System
ruclips.net/video/Y4ZeFd9T4Jk/видео.html
Water Leak Detection System Testing & PPM
ruclips.net/video/AI9e8yle8WE/видео.html
Must Watch
Addressable WLD Layout | Step By Step Understanding
ruclips.net/video/BCQ2Y-Cr3FI/видео.html
FM200 Gas Release Panel Commissioning
ruclips.net/video/RaWbIHt-kTk/видео.html
Well
Thanks for your comment 😊
Sir make a vedio on Novec 1230 suppression system design
Bhai jo pipe Dia hai change niy hi hoga kya? Yani ek ex_2 nozzels aane se pipe starting se last tak same ana chahiye kya? Niy tho change hoga kya?
Sir why don't we use Fm200 system instead of Co2 flooding system as most of the industries are using co2 flooding system?
95.3mr2 ye ek nozzle ka coverage area hai I mean to say how much area covers by 180 nozzle & 360 nozzle is it 95.3m2 per nozzle??
I think same for both but i will check & let you know.
Hi bro the ccylinder selction in fm200 ? he sizes are different than norma, like 65,80,120,140 and so on how to find that and where?
There are standard in pipe dimension, you can refer NFPA guidelines.
@@Ansari29 can't recognise it in nfpa 2001,please suggest the page
Sir can you also make a video about the sytsem design of IG100?
Hi dear,
I haven't worked on IG100 system, but if I will get info then I will try to make video on it.
Thank you so much for your query.👍👍👍
@@Ansari29 Thank you sir and Stay Safe!
You too dear 😊
htt ps://ruclips.net/video/sotRPYUNQU0/видео.html
Types of sprinkler and their colour coding.
Hi
FM 200 and Novec 1230 design method is same or different? Plz reply
Almost same, bcz both is fire suppression system.
super vedio bro where can i get these tables if possible can you send a link it would be much helpfull
Ok I will check & get back to you
@@Ansari29 thanq
bro what will be flow velocity of gas
@@badhrig27 After receiving the fire signal, FM 200 is discharged totally from the cylinders within 10 seconds.
Dear friend i need novec design video just like this and wants to know that will pipe size have a different imapct due to 25 or 42 bar pressure system
Ok will check & let you know.
@@Ansari29 thanks bro & again thanks for the information you have shared with us about fm200
Thanks for your comment 😊
Plz try to slow speach
Yes sure
I have one doubt as you said in your video fm-200 room temperature should be minimum 21 degree Celsius is it acuat room temperature or its a design temperature?? & if the physically room temperature is more than 20 then what will happen & keeping room temperature less means that to keep agent in cooling environment??
Will check & let you know soon
Water Leak Detection System Testing & PPM
ruclips.net/video/AI9e8yle8WE/видео.html
htt ps://ruclips.net/video/sotRPYUNQU0/видео.html
Types of sprinkler and their
1.
7:55
Bhai pipe ki thickness se 90° elbow aur jo baaki hardware h unke corresponding length ka kya matlab h. jaise isi case m 50mm pipe ke corresponding 90° elbow m length 1.68m h. iska kya matlab h bhai
2.
8:07
yaha aapne 2inch ke corresponding values li h. agar pipe thickness zyada ho to phir kya kre? yaha to 3 inch tak ki values h.
AMAZING THANK YOU
BUT HOW CAN I CALCULATE THE HYDRAULIC CALCULATIONS FOR THE SYSTEM AND HOW IT WILL EFFECT THE CYLINDER SELECTION
Thanks for your comment.
I will check & get back to you.
Must Watch
Addressable WLD Layout | Step By Step Understanding
ruclips.net/video/BCQ2Y-Cr3FI/видео.html
FM200 Gas Release Panel Commissioning
ruclips.net/video/RaWbIHt-kTk/видео.html
FM200 | Ravel RE-25AR Panel wiring 🔥
ruclips.net/video/_6q0ursNZa4/видео.html
Question-1: Pls clarify the slide again which is Pipe and other hardware fittings length. As we can see in attached video for this slide you have mentioned to install 2 inch pipe we need 5.1 feet 90 degree elbow, 2.45 feet 40 degree elbow here my question is we will use elbow where there is a change of axis for example x to y axis. otherwise it can be change due to increase of height for axis. pls clarify it for me.
Quwstion-2: I am confused for step-6: Other system component.
pls describe this slide again.
Thanks for your comment, I will check & let you know. give me some time.
I have checked my slide, mentioned data is as per standard, but sometime we need to change as per requirement, You can contact with your OEM, I think they will guide you properly
Class A kaha pai use hota hai ?
Addressable system m
Pls share my videos in your company group
Hi Ansari,
I want to learn some of topics fire protection system.
Are you interested in teaching via online mode.
Dear, thanks for your interest in my videos & way of explanation. But I can't give online training due to very busy schedule in my current job.
You can learn & understand from my videos & send your query to ansari2991@gmail.com
I will try to give you solution.
FM200 is banned now a days in forgien countries but not anywhere . In india it is available. Data center customer prefers novec 1230 or inergen. And conventional nozzles ( brass) are hazardous to server's HDD due to their noise level . That's why acoustic nozzles are invented.
Thanks Vishal for sharing very useful information.👍👍
What is fill density to decide cylinder kg and then its quantity?
It's a standard predefined value depends upon the volume of the room.
htt ps://ruclips.net/video/sotRPYUNQU0/видео.html
Types of sprinkler and their
htt ps://ruclips.net/video/sotRPYUNQU0/видео.html
Types of sprinkler and their
What is causes of pressure getting low in fm200 cylinder
Thanks for your comment
It will never suppress fire properly
@@Ansari29 I mean what are the factors will affect the cylinder pressure getting low?my cylinder pressure is low now our client wants to know why it get low? Thank you for ur reply
Water Leak Detection System
ruclips.net/video/Y4ZeFd9T4Jk/видео.html
Water Leak Detection System Testing & PPM
ruclips.net/video/AI9e8yle8WE/видео.html
Great Job. could you give me an e-mail? i am from Brazil and I would like to clear some doubts.
Ansari2991@gmail.com
Where do you get the table from the pipe sizing?
FM200 NPFA designing sheet.
@@Ansari29 can you send me the link sir if possible? Thank you so much
Ok sure I will try to share very soon
@@Ansari29 Thank you sir!
htt ps://ruclips.net/video/sotRPYUNQU0/видео.html
Types of sprinkler and their colour coding...
Thank u sir
Most welcome, pls share my videos in your company group
Hi, excellent video. I'm from Brazil and we don't have many FM200 videos like yours. I saw that you did a preliminary sizing of the pipe diameter but I would like to know how you do the final dimensioning of the pipes? Do you use any software? What is the equivalent length of the nozzles? Thanks for listening