(:47-1:04) Probably the best sounding turbo whistle I've ever heard. Awsome D9 you have there. Back when Cat was Cat. Glad to see these old Cats still in use, American made and built to last.
Man, what a Giant . Love those old machines. They run forever and are easy or some kind of easy to maintain. By the way that cool Le tournou scrapper looks a little bit like the bad mobiel
I remember doing the rear tyres on one of the scrapers it like a giant wheelbarrow wheel on a spindle. It's held on with 2 clamps. We removed the wheel with help from a 3cx n when the driver tipped it up to take it apart it rolled of down the field we sat there pissing ourselves laffing oh happy days 😀
Brings back memories of my lumber yard days when it took an hour just to get the 2 cycle pony motor running good enough to start the old Cat motor in sub zero weather. Good times!
In the winter it would take me the first half hour to hour just to get the pony motor running on an old D8 at a huge rock Quarry in Ohio County Kentucky back in the mid 70s Then keeping it running long enough to fire the cat up was another story lol
Good tires are hard to find at the right price. "Workin' with what ya' got" is a good way to put it. The shoe fits so it does the job for now. 1956 year model.
my dad worked for Letourneau when the were made in the plant at rydalmere nsw australia in 1940s and 50s ,they loined with westinghouse at some time.lots of good memories at the plant christmas parties.
We used to pull scrapers with D-9s all the time. That's an awfully small scraper for a D-9. The smallest we pulled with ours typically is a 463, although we did pull a 621 in extremely soft conditions. The largest we have pulled is a 641. A 631 size hydraulic scraper or a 90 cable is just right for a D-9. That was a little much though and although it loaded it fine, it would spin out on high spill piles. D-9s are great scraper Cats although 36A D8Hs and 76V D8Ks are better with the standard transmission. They will pull a 463 scraper well and use half the fuel of a D-9 pulling it. And, in soft ground, I can actually pass a D-9 because they don't torque down.
You're right about the bureaucrats, about 15years ago, just before I retired I was operating a 988 Cat loader on a federally funded highway project. First, they made us install diapers on all the equipment to prevent even a single drop of oil from dripping on the ground and these diapers were to be cleaned daily. 1hr to remove, clean and replace. Then when the job was done, they made us bulldoze the sides of the pit down and spread topsoil on it, ruining a perfectly good gravel deposit.
That turbo wjistle is what made operators deaf. I ran a push cat D9 and I am glad it was a short term replacement for a D8H. Th ose Le Tournau scrapers were sure ugly but worked.
Run an outfit like that back in the 60's only with a D7. Scrapers always rolled on steep backslopes and fills. Keeping the cable to tight on a short turn brought it right over on you. Must have pulled 10 miles of cable. Ahh the good old days....
@odmcarp We couldn't find a matching tire for it. The smaller tire fit the rim, so we used it. Yes there is a slight angle because of the uneven tires.
This is what we call a " CAT-n- Can. I worked allot with this setup. And another D-8 cat as a push cat to help me load the bay. We would change with each other. If you didn't be carful, the Cat would walk right thru those cables Takes time to rethread the cables. The HD 21 bulldozer would not break the cable. maybe it was a HD-24. Long time ago in the Oregon desert summer and winter building 24 small dams.
Neat. Is there a reason for the uneven sized wheels in the rear, or was that "workin' with what ya' got"? That D9 is in pretty good shape, and the turbo made quick work of filling that can. Only missing 2 glass panels in the cab too. Surely a rare find. What year?
Does this D9 comes from Holland? Because it says "Beemsterboer" on the side? I myself am from Holland, so I was wondering. Great sound by the way, love to hear the turbo whistle.
Why are these older beasts still not being used, seems all they have to do is push dirt. Why not just run them till they die. How long does it take to recoup your investment on a new one, after factoring in the savings on maintanence and fuel savings?
Este sistema funcionaba sobre los años 50 cuando no existían los hidráulicos,los montaban los Allí Chalmers,HD y los Internacional Harbester TD y los Mitsubishi
Reminds me of times I spent pushing; listening to the turbo whine up hill pushing forty foot deep hole500feet by fifteen hundred feet watching the soil roll above the blade & then the refill & compact!!!
Yeah, it MIGHT be 'nuff power in that Cat...I think I heard the gov open just a hair at least once?☺! As much as I hate to admit such: It took me until about the 4½ min. mark to realize it really was filling with dirt!!! Up til then? Hell, I thought you were just pullin' it around knockin' down horseweeds with it, just to prove it does/would roll.....!☺
@cdog9991 diesels have torque not horsepower the new cat c15 which is the engine that is used in many tractor trailers only produces 600 hp but it has 2050ft/lbs of torque. another thing you have to remember is that this is an old engine and doesn't have the technology which gives a lot of new gas and diesel engines their power, it has a turbo charger but next to that it uses it's shear size to produce those 320hp (which even by today's standards is quite powerful for a bulldozer).
Them letourneau scapers were a pain in the butt,That old 9 sounds good but look'n a bit tired, That's the thing about them old cats they just keep running.
Some great old machinery there. Looking at that old rear tyre, I'm guessing there is little or no pressure in it. Just the strength in the sidewall keeping it up.
looks like the old girl sat a ,day or 2 cant beat the old iron the equipment they make today could never withstand a long park like the the old man said ..there was a young bull and an old bull standing on a hill looking down at a herd of heffers ..the young bull said lets run down and get one of them heffers ..the old bull said naah lets walk down and f##** em all !!!
(:47-1:04) Probably the best sounding turbo whistle I've ever heard. Awsome D9 you have there. Back when Cat was Cat. Glad to see these old Cats still in use, American made and built to last.
one of best turbo sounds on a diesel ever
Man, what a Giant . Love those old machines. They run forever and are easy or some kind of easy to maintain. By the way that cool Le tournou scrapper looks a little bit like the bad mobiel
Ha, that was my first thought, when i saw the scrapper, its the frame of the bat mobile !!
Great oldie and marvelous sound. Still in a very good shape. They did a very good job everywhere in the world.
I love the turbo spooling up sound that is great.
I remember doing the rear tyres on one of the scrapers it like a giant wheelbarrow wheel on a spindle. It's held on with 2 clamps. We removed the wheel with help from a 3cx n when the driver tipped it up to take it apart it rolled of down the field we sat there pissing ourselves laffing oh happy days 😀
Brings back memories of my lumber yard days when it took an hour just to get the 2 cycle pony motor running good enough to start the old Cat motor in sub zero weather. Good times!
2 cylinder not 2 cycle.
In the winter it would take me the first half hour to hour just to get the pony motor running on an old D8 at a huge rock Quarry in Ohio County Kentucky back in the mid 70s
Then keeping it running long enough to fire the cat up was another story lol
@@georgebordi8986 No, it was a 2 cycle engine...a wingy dingy. That wasn't a typo.
@@mtlassen1992 been around Caterpillar equipment for 50 years and never heard of them having a 2 cycle pony moter
@@georgebordi8986 Well I guess you've learned something today then. It was an old Cat road grader from the 50's(over 70 years old now).
Good tires are hard to find at the right price. "Workin' with what ya' got" is a good way to put it. The shoe fits so it does the job for now. 1956 year model.
my dad worked for Letourneau when the were made in the plant at rydalmere nsw australia in 1940s and 50s ,they loined with westinghouse at some time.lots of good memories at the plant christmas parties.
love the sound of that D9!!
I've read LeTournau's book, Mover of Men and Mountains. Seeing his creation in operation, brings a whole new light to the story!
WOW cool to c all this old machinery in use sounds amazing!!! love that turbo whine!!
TLAUZON22 m
.
.
bad ass older D9 , some real power right there ! i love old equipment ! i drive my dad older stuff all the time ! turbo sounds bad ass too !
Those old d-9 cats could pull the rear end out of a dead rhino lol , Great video !
We used to pull scrapers with D-9s all the time. That's an awfully small scraper for a D-9. The smallest we pulled with ours typically is a 463, although we did pull a 621 in extremely soft conditions. The largest we have pulled is a 641. A 631 size hydraulic scraper or a 90 cable is just right for a D-9. That was a little much though and although it loaded it fine, it would spin out on high spill piles. D-9s are great scraper Cats although 36A D8Hs and 76V D8Ks are better with the standard transmission. They will pull a 463 scraper well and use half the fuel of a D-9 pulling it. And, in soft ground, I can actually pass a D-9 because they don't torque down.
You're right about the bureaucrats, about 15years ago, just before I retired I was operating a 988 Cat loader on a federally funded highway project. First, they made us install diapers on all the equipment to prevent even a single drop of oil from dripping on the ground and these diapers were to be cleaned daily. 1hr to remove, clean and replace. Then when the job was done, they made us bulldoze the sides of the pit down and spread topsoil on it, ruining a perfectly good gravel deposit.
That turbo wjistle is what made operators deaf. I ran a push cat D9 and I am glad it was a short term replacement for a D8H. Th
ose Le Tournau scrapers were sure ugly but worked.
Watched Le tourneau scrapers and D6 earthworks in Erina Drive inn as a kid back in 56...phwooo thats a life time ago..
Самый красивый трактор !
Самый красивый звук !
That D9 is handling the scraper. Don't think anything smaller could continue to move the scraper.
No problem, I appreciate your reply. Overall, the old dozer sounds and looks good. Love to have it!
Run an outfit like that back in the 60's only with a D7. Scrapers always rolled on steep backslopes and fills. Keeping the cable to tight on a short turn brought it right over on you. Must have pulled 10 miles of cable. Ahh the good old days....
@odmcarp We couldn't find a matching tire for it. The smaller tire fit the rim, so we used it. Yes there is a slight angle because of the uneven tires.
What size of tires does it take? We might have something laying around here.
Que fuerza ! el D9 solito cargo y se llevo la trailla Nosotros la enganchamos a un TD 20 IHC y empujabamos con otro TD 20 solo no podia
The engine sounds lovely
Thanks
great one, love the turbo-sound of the D9
This is what we call a " CAT-n- Can. I worked allot with this setup. And another D-8 cat as a push cat to help me load the bay. We would change with each other. If you didn't be carful, the Cat would walk right thru those cables Takes time to rethread the cables. The HD 21 bulldozer would not break the cable. maybe it was a HD-24. Long time ago in the Oregon desert summer and winter building 24 small dams.
It was a pleasure to watch this video. Nice.
Doing a little yard work around the Condo I see. LOL That thing is a BEAST!
what it really needs is new rails and pads!!
My neighbor has 120 ply 737 tires on his old AC scraper.
I'd love all that gear laying around my place.
She’s beautiful 🍀🇺🇸🇺🇸🇺🇸🤙🏻
Règi csörlös dejovolt! 13èvig dolgoztam vele!!!!!
Neat. Is there a reason for the uneven sized wheels in the rear, or was that "workin' with what ya' got"?
That D9 is in pretty good shape, and the turbo made quick work of filling that can. Only missing 2 glass panels in the cab too. Surely a rare find. What year?
Great to the old gear working
@thumasta666 It was a test run. All the cables where strung up for the first time and we had to test it out.
love the sound they make
Love the sound of that turbo screaming!!
Love.that.pony.motor.
Nver.knew.it.spun.3000.
R.P.M
Before.starting.the.engine
We,have.come.along.Way!!!!!just. turn. A.key!!!!!
We have women at work built like that D9. And sound the same to when squawking orders lol
i LOVE this machine!!!
Does this D9 comes from Holland? Because it says "Beemsterboer" on the side? I myself am from Holland, so I was wondering.
Great sound by the way, love to hear the turbo whistle.
Звук дизеля шикарный!
What awesome old iron dont you have? Any LeTourneau snow trains lying around by chance..haha. Unlikely, but you do have a lot of cool machines!
listen to that turbo!!!!!
What year is the old cat 9?
@DieselPowerTV Excuse my ignorance, but how does a massive thing like that have only 320 hp? There are 1.6L hondas with over 400 hp.
thx
my son Maximus loves your videos
the beautiful sound engine, great.
almost sounded like it needed a pony motor just to spool the turbo up to speed! =O LOL
Cidade quê já teve mas D 9 era AQUI em Barra do Bugres MT Brasil Faz Jauquara éra 5 monstros desses
Why are these older beasts still not being used, seems all they have to do is push dirt. Why not just run them till they die. How long does it take to recoup your investment on a new one, after factoring in the savings on maintanence and fuel savings?
What a neat machine with that pull scraper. How old is that dozer and scraper.
are you scraping just because you can? or are you trying to make a road on your property or something?
Awesome machinery
I think that ol' girl deserves a restoration.
Very nice , and a thumbs up liked.
Amazing, these machines built America we now live in.
Este sistema funcionaba sobre los años 50 cuando no existían los hidráulicos,los montaban los Allí Chalmers,HD y los Internacional Harbester TD y los Mitsubishi
VIEILLE MACHINERIE LOURDE QUI TRAVAILLE ENCORE TRÉS BIEN.**
Great video...!!!!!!!!!
how many yards is your scraper?
How old is this beast and what HP is it?
Reminds me of times I spent pushing; listening to the turbo whine up hill pushing forty foot deep hole500feet by fifteen hundred feet watching the soil roll above the blade & then the refill & compact!!!
i like watching a crawler pull a big offset disk have you ever pulled a disk with this d9?
There sure is a mismatch of tires on the back of the scraper.
ЛЕГЕНДА !!!!!!
Man, what a beast.
@international3601 It did have a pony motor in this video, but now it has a electric start.
Yeah, it MIGHT be 'nuff power in that Cat...I think I heard the gov open just a hair at least once?☺! As much as I hate to admit such: It took me until about the 4½ min. mark to realize it really was filling with dirt!!! Up til then? Hell, I thought you were just pullin' it around knockin' down horseweeds with it, just to prove it does/would roll.....!☺
Fine stand of thistles !
I sure with I had your playground. I grew up around that older equipment my grandpa was an operator.
Damn that thing is awesome looking/sounding!
Theres nothing like the sound of the turbo winding up,
@cdog9991 diesels have torque not horsepower the new cat c15 which is the engine that is used in many tractor trailers only produces 600 hp but it has 2050ft/lbs of torque. another thing you have to remember is that this is an old engine and doesn't have the technology which gives a lot of new gas and diesel engines their power, it has a turbo charger but next to that it uses it's shear size to produce those 320hp (which even by today's standards is quite powerful for a bulldozer).
fantastic!!!!
Them letourneau scapers were a pain in the butt,That old 9 sounds good but look'n a bit tired, That's the thing about them old cats they just keep running.
damn,i would love to drive one of those and feel the power!!!
must have been working a slope. one big and little tire on the back. Cool old rig. She needs new shoes.
Sounds Great
Niente ferma Caterpillar.🇮🇹👍
what are you doing with this old equipment?
thats what a cat dozer should sound like
Not the most environmentally friendly piece of equipment to say the least but it is really cool to see that old Cat back in action. Good job !
Anyone else notice how the scraper sort of looks like the new bat mobile?
WE HAVE ONE OF THEM !!!! AND A CAT JUST LIKE THAT !!
Some great old machinery there. Looking at that old rear tyre, I'm guessing there is little or no pressure in it. Just the strength in the sidewall keeping it up.
N
what year is that thing?
my guess would be a 1954-59 cat d9-19a,maybe 18a
Love that sound
man that turbo sounds kinda like a taknihurn
Thanks for the video
Is this the RIP place for the D9??
Listen to the CAT purr best sound from those ole girls and turbo whistle. They don't make like that anymore
Hey, that dozer may be old, but at least the tracks are in great shape. lol
The Bone Yard of Dozers... XD
You guys have the coolest old equipment. Do you need an apprentice?
damn yall got some toys
That D9 would be at least 40 years old.
looks like the old girl sat a ,day or 2 cant beat the old iron the equipment they make today could never withstand a long park like the the old man said ..there was a young bull and an old bull standing on a hill looking down at a herd of heffers ..the young bull said lets run down and get one of them heffers ..the old bull said naah lets walk down and f##** em all !!!