Sometimes I don’t understand why some videos get dislikes. This is perfect DIY. He showed everything step by step. I did it, it was my first time and it come out perfect. Thanks for the video, bro.
as a guy who does this for a living, i can say, no, its not prefect DIY and this is kinda hard to watch because he makes some decisions that make his wrap harder to accomplish, but hey, he got the job done in the end so no dislike here, but no like either.
Because this is not Carbon Fiber wrapping. This is vinyl wrapping. It's not AT ALL the same. He even wrote CARBON FIBER in uppercase XD. The process has nothing to do with actual CF wrapping, the results looks half as good, and it doesn't add any strength. In the case of dash parts strength doesn't matter, but actual CARBON FIBER wrapping is used a lot to strengthen a part... This video doesn't help whatsoever with that. This is why he gets dislikes.
When I first started watching your channel I only watched the BMW videos because I own a BMW. Now I watch every single video you upload simply because your content is very educational and entertaining. Even the background music is somewhat soothing. Lol. Great job with the vinyl wrap. Looks stellar! Keep it up the amazing videos Justin!
I used ordinary eBay matte blue vinyl on my 2009 crv. This little square piece you cannlift off that's on the top. Anyway l wrapped it without proper preparation like wiping it with alcohol etc. Just normal wiping it clear of dust. Then wrapping it. First time as experiment and that piece gets full sun exposure everyday. 2years later it's holding on pretty nice and clean. My point is. Imagine if it was top quality adhesive vinyl or had proper preparation. I'd imagine it'd hold on good for at least double the time. The colour was same as first day as well. So anyone can do it and with practice you could get professional looks even on the more complicated parts you're doing. Hope that gave you abit of an idea.
I came here to see you Skate! Haha. Lot of fun Bro!. Been planning to do a vinyl wrap too but still finding the confidence to do it. Thanks for showing this video
I'm kind of surprised that I don't see more people use some windex to help position the carbon fiber rap. It helps a lot and as you're using the hair dryer it will dry it as you're forming it around the radiused edges and corners and it gives you a little bit of 'slip&wiggle' to work with also.
At first I thought no way this will look good and by the end well just WOW 🤩 Maybe it’s a big side hustle for the people that don’t have your skills. Cool skateboard ending I bet you end up with more concrete Parker’s for you and your friends! I’m too old but it would be fun to watch! Thanks for the video
Was hoping to see how you dealt with the window on the 2nd piece. When you make relief cut at each corner how do you keep the cuts from being visible? Obviously you want to keep your cuts on back side so they're not seen, but wondering if the material wraps well enough to do this?.
Been watching for a while, I work at a wrap shop an the only thing I have to say about your wrap other than it was pretty good is the fact that you use a bare squeegee lol. Usually you’d wanna use some sort of felt or soft surface when rubbing the squeegee on the vinyl. No big deal but just something I wanted to point out cuz you risk scratching the vinyl also using a heat gun can be a lot easier I wrapped for the first time with a hair dryer and it sucked especially things like mirror caps that are more complex not too hard to use just have ti be more careful and use it sparingly so you dont overheat it. Anyways keep posting cool stuff!
Thanks for the tips! Usually when experts watch my videos they just rip me apart without actually giving useful advice. In the sharp corners I can defiantly see where a heat gun would have made stretching a lot easier. I'll use one for my next project for sure!
Matt carbon vinyl isn't my thing, just looks like the book covers we had when I was young. I would've wraped it in 4D gloss carbon, but to each their thing. Also are you guys going to change the rear F1 fog light style light to an LED one?
Great instructional video....very inspiring for me to have a go myself....well done and thanks for taking the time, you make the job look very easy! Cheers from Australia..👍🏻
Looks great! I think I'm going to try to wrap the hood of my truck cuz it looks the clear coat is about to start failing. It's 15 years old and I really don't want to repaint it. Thanks for the great video.
Perfect fit. You make it look so easy. I try to wrap my chest freezer. the idea is great but it's full of creases. I'll try it again again and add heat. Thanks for the tips.
I’m looking to do this with the bezel along my grill. Do you think the 3M would hold up well with some clear coat on it? My idea is to apply a few coats, then wet sand and buff it. Trying to have it look as close to the real thing as possible.
This is really helpful video .. no black loud music in the back ground no posing no high fives and no B/S just a good information and good video on how to do this step by step 100% brilliant 👏 👌 Hope that's not your wife's hair dryer 😊
Yes sir! Don’t listen to what others say I promise you it leaves residue and ruin your piece So you’ll have to Re wrap if u ever take off your 1st film
I clicked on the video to see how well you wrap those pieces and was very impressed with how it turned out, and then you throw some skating content on there as well. Good stuff man!
dude this is great! my interior is starting to look a bit dated on my civic, even though the dashboard itself looks pretty modern. Going to try this soon :D
![How to Change your Car Interior to Real Carbon Fiber (Carbon fiber Skinning/Wrapping) [DIY]](http://i.ytimg.com/vi/GhG9_ptRhwg/mqdefault.jpg)
![How to Change your Car Interior to Real Carbon Fiber (Carbon fiber Skinning/Wrapping) [DIY]](/img/tr.png)
Idk if it’s just me but there’s something so soothing and satisfying when you wrap something and it comes out perfect. Almost therapeutic lol
Speedy Gonz F22 I agree! It’s so frustrating to work with but the end result is worth it 😅
@@justinbuice I wraped the whole Interior trim of my BMW E91 Man it took so long to get it perfect! But the endresult looks amazing
@@jonask.864 This video was almost an hour long before I cut it. And that was just for those two pieces!
@@justinbuice The E90 took like 2 days with 6 hours each day and a lot of swearing! After that i told myself to never do something like that again 😂
Just carbon wrapped my trim pieces and I feel that! The feeling I got after it all went back in and looked good was therapeutic af lol
Sometimes I don’t understand why some videos get dislikes. This is perfect DIY. He showed everything step by step. I did it, it was my first time and it come out perfect. Thanks for the video, bro.
Cuz he showed how to do the easy part and not the more complicated dash piece...
Peanut butter and jealous!!!
Haters
as a guy who does this for a living, i can say, no, its not prefect DIY and this is kinda hard to watch because he makes some decisions that make his wrap harder to accomplish, but hey, he got the job done in the end so no dislike here, but no like either.
Because this is not Carbon Fiber wrapping. This is vinyl wrapping. It's not AT ALL the same. He even wrote CARBON FIBER in uppercase XD. The process has nothing to do with actual CF wrapping, the results looks half as good, and it doesn't add any strength. In the case of dash parts strength doesn't matter, but actual CARBON FIBER wrapping is used a lot to strengthen a part... This video doesn't help whatsoever with that. This is why he gets dislikes.
When I first started watching your channel I only watched the BMW videos because I own a BMW. Now I watch every single video you upload simply because your content is very educational and entertaining. Even the background music is somewhat soothing. Lol. Great job with the vinyl wrap. Looks stellar! Keep it up the amazing videos Justin!
Joey Williams Thanks! I appreciate that!
Your vids are a level above most RUclipsrs... the way u edit and film is always impressive ... u set your self apart from every vlogger..
*alright now we just start wrapping*
can we get a year update video? i would love to see how it held up thru the last year!!
:))
it's 3M heat gunned on. it'll probably take something thermal nuclear to get it to start peeling. haaa jk
I used ordinary eBay matte blue vinyl on my 2009 crv. This little square piece you cannlift off that's on the top. Anyway l wrapped it without proper preparation like wiping it with alcohol etc. Just normal wiping it clear of dust. Then wrapping it. First time as experiment and that piece gets full sun exposure everyday. 2years later it's holding on pretty nice and clean. My point is. Imagine if it was top quality adhesive vinyl or had proper preparation. I'd imagine it'd hold on good for at least double the time. The colour was same as first day as well. So anyone can do it and with practice you could get professional looks even on the more complicated parts you're doing. Hope that gave you abit of an idea.
Sir you performed a flawless job on that wrap. True love for your hobby.
Really awesome video, please consider showing in detail how you handle the inside radii on the radio trim.
Damn...you nailed that line up with the pattern!
Nice job. My 128 got the same carbon wrap and the wife went with a blue brushed metal on her E93. Totally worth the time and frustration.
Thanks! Just got my Carbon sheets and had no idea how to apply it. LOVE the video!
Those patterns matched up perfectly... 👌🏽
I was relieved when I saw how they looked in the car lol
I came here to see you Skate! Haha. Lot of fun Bro!. Been planning to do a vinyl wrap too but still finding the confidence to do it. Thanks for showing this video
Great job Justin! It has given me a few ideas to try out. Stay safe and healthy. Cheers from Ohio.
Martyn H it’s a fun project for sure. We got a roll of the brushed steel for my dad’s car for after lockdown
Serious question.. This would be my first time doing something like this should I buy the kit and do it myself or is it that difficult? Thanks!
I very much enjoyed your video and learned something too. Can't ask for more than that. Have fun with your parking block. Kowabunga, bro!
I know this is a year old but ima say this, you motivate me to to make changes to my car and your content is great!
Thanks!
Still one of the cleanest 86s around dude. That video was satisfying to watch!
Bilal Ehsan thank you!
I'm kind of surprised that I don't see more people use some windex to help position the carbon fiber rap.
It helps a lot and as you're using the hair dryer it will dry it as you're forming it around the radiused edges and corners and it gives you a little bit of 'slip&wiggle' to work with also.
Good job matching the pattern between the two pieces.
Great video and a tremendous help for my project. It would be great to see close up how you are doing those relief cuts for the corners.
You are the most chillest dude ever! Great video my guy! Insane results too! Nicely done.
Good call on keeping the wrap going the same direction
great! you need to CF the diffuser, will look SICK!
I went with actual carbon on my interior. Had wrap prior. 10x better for sure. Olm makes some good options for skin overs
At first I thought no way this will look good and by the end well just WOW 🤩
Maybe it’s a big side hustle for the people that don’t have your skills. Cool skateboard ending I bet you end up with more concrete Parker’s for you and your friends! I’m too old but it would be fun to watch! Thanks for the video
Was hoping to see how you dealt with the window on the 2nd piece. When you make relief cut at each corner how do you keep the cuts from being visible? Obviously you want to keep your cuts on back side so they're not seen, but wondering if the material wraps well enough to do this?.
you looks so professional " you are the BIG GUY
and a skate tip at the end, love it.
Skilllls on the board great vid.
Been watching for a while, I work at a wrap shop an the only thing I have to say about your wrap other than it was pretty good is the fact that you use a bare squeegee lol. Usually you’d wanna use some sort of felt or soft surface when rubbing the squeegee on the vinyl. No big deal but just something I wanted to point out cuz you risk scratching the vinyl also using a heat gun can be a lot easier I wrapped for the first time with a hair dryer and it sucked especially things like mirror caps that are more complex not too hard to use just have ti be more careful and use it sparingly so you dont overheat it. Anyways keep posting cool stuff!
Thanks for the tips! Usually when experts watch my videos they just rip me apart without actually giving useful advice. In the sharp corners I can defiantly see where a heat gun would have made stretching a lot easier. I'll use one for my next project for sure!
Matt carbon vinyl isn't my thing, just looks like the book covers we had when I was young. I would've wraped it in 4D gloss carbon, but to each their thing. Also are you guys going to change the rear F1 fog light style light to an LED one?
Awesome video😁
Respect from Serbia bro❤
deja thanks!! 🙏🏻
I never expected to find a comment from a fellow Serbian on this channel
Uroš S. Pozdrav od crnogorca
That turned out clean good work bro
WOW!!!!!!!!!!!! Great video! It looks so perfect after it has been done and installed. Great job indeed.
that turned out awesome, this is what I want to do to my ‘22 Model 3 😎 to get rid of the faux wood look
this looks soooo good !
I love the parking block!
Great instructional video....very inspiring for me to have a go myself....well done and thanks for taking the time, you make the job look very easy! Cheers from Australia..👍🏻
About do my Bimmer now after watching this 🔥
i love the term relief cut
one dumb question why use heat or heater in the proccess and thanks ,ur awesome you got a new subscriber!
Looks great! I think I'm going to try to wrap the hood of my truck cuz it looks the clear coat is about to start failing. It's 15 years old and I really don't want to repaint it. Thanks for the great video.
Perfect fit. You make it look so easy. I try to wrap my chest freezer. the idea is great but it's full of creases. I'll try it again again and add heat. Thanks for the tips.
Thanks for sharing, but is it 4d or 5d?
And is it okay to put 5d on the dashboard?
Excellent job J-Boogie 👏🏾🔥💯
Buying that parking block was a great idea!
I love it. even just going to the street to get my mail i'll hit a little boardslide on the way down lol
Nice job with the video. Try getting better camera shots as your hand is in the way sometimes. Also, looooose the funky music!
I’m looking to do this with the bezel along my grill. Do you think the 3M would hold up well with some clear coat on it? My idea is to apply a few coats, then wet sand and buff it. Trying to have it look as close to the real thing as possible.
Can you also wrap the fauz leather parts? Like the dash?
How’s it holding up bro? I wanna do this to pieces of my Audi
love your vids man ! i actually also wrapped the interior trim of my e90 in carbon fiber
Ian awesome!
Great video... Came out beautiful!!
Hey 👋🏾 Justin if you don’t mind me asking, where did you find the carbon fiber and the glue? I love how this turned out I wanna try my own.
I really wish he had answered, I can’t be the only other person who’d like to know!
I love the last part you added to the video! take care man
Ryan Zhang 🙏🏻
Great video Justin. Do you have plans for a steering wheel wrap too? That would bring it home.
Looks amazing bro!!!! I totally wanna do this to my car now!!
This is really helpful video .. no black loud music in the back ground no posing no high fives and no B/S just a good information and good video on how to do this step by step
100% brilliant 👏 👌
Hope that's not your wife's hair dryer 😊
You better not kick any of the neighborhood kids out when you find them doing rail slides haha good work on that wrap.
Great work bro !!
You are a cool guy mate, thanks for the tips
Looks professional
Perfect job looks Great and it’s very satisfying to see the out come look that clean I’m going to wrap mine now thanks
Ernesto the toilet seat
You're an awesome photographer😃 do you post photos somewhere?
instagram @justinbuice
NIce work! Thanks for sharing. I am ready to give it a go!
You should wrap your bmw interior too! Maybe brushed black aluminium or something like that 🥳
Really Nice, I am sold
1:05 mine says airbag on it iis it still safe right
Nice. That adhesion promoter hard to pull off later on?
Yes sir! Don’t listen to what others say I promise you it leaves residue and ruin your piece
So you’ll have to Re wrap if u ever take off your 1st film
Really good, doing my first ever wrap today. Blue vinyl in my Yaris haha
He was bopping his lips in the thumbnail!!!! I don't like him at all . What a little shit
Danny works for Denny's,!
I want some Denny's this morning.. nothing in the Rodriguez I looked everywhere I'm kind of hungry
If I were to wrap the internet of my 2 door truck how much of the wrap would I need??
Great video Justin, very professionally done as usual!
Thank you!
I clicked on the video to see how well you wrap those pieces and was very impressed with how it turned out, and then you throw some skating content on there as well. Good stuff man!
Great stuff!! Looking to do something like this for my sons car. Thank you!
Awesome work and tricks. Good job.
bro i did the wrap on my interior but it got peeled off from the sides automatically in the summers. is there any way to tackle it?
Great job Justin!
Thanks!
Nice video, you should wrap the whole exterior of your BMW. Would definitely give it a fresh look!
Amaan Chowdhury I’d love to. Im nervous about the paint flaking off the front bumper from a bad paint job 😬
Really clean wrap there bro
Thank you!
Looks great. I did my interior on my E92, turned out really nice.
Ron Engert awesome!
Hey Justin I watch all your videos iam from Pakistan and I'm a big fan and love your videos ❤️peace ✌🏻
Hamza chauhdry glad you like them!
What app did you use for the video edits? What is the name of the effect?
I use Adobe Premiere Pro
dude this is great! my interior is starting to look a bit dated on my civic, even though the dashboard itself looks pretty modern. Going to try this soon :D
same here 2010 interior for the civic ex looks outdated
Is the blow dryer for hair works?
Looked perfect! 👍
Marshall Fox 🙏🏻
i want to wrap my lip kits and wing on my integra how much wrap should i need for that ?
What about if you CAN’T remove the object you need to wrap??
Hey quick question can you do this with textured plastic?
Good job...and very helpful
Just Did this to my car. Gotta finish the door panels!
Nice!
whats the name of the 3m adhesive and where to buy it??
I can use the same method on the dash to my bike?
Nice work bro, I see a very good wrap, I don't know why almost all videos use vivid instead of 3m, 3m is easier to wrap than vivid?
Thank you for doing that for me! ♥️ It came out perfect!
illestprincess no problem! Much better than before :)
What do you drive?
Kool video Justin, wrap your bmw interior in vinyl. It’ll look kool
I had this same wrap on mine a long time ago but I went back to the aluminum
Great Job 4r4r
Nice man. Wearing the dunks too 🔥
Alan Luna my favorite 🔥
Came out really good! Appreciate the how to video
That’s a banger for $55...... I’m officially on the hunt!!