Thanks for your videos. My iPhone 12 Pro Max is 16 months old and it has restarted twice in 16 months. Is this a serious problem? Today it restarted while watching a RUclips video. Is this is a serious problem? Any fix for this?
Subscribed thank you bro only channel with a proper informational video about this issue that you would have to watch 10 other videos that are half nonsence to find
well explained ! i have a question tho, my panic report shows that : missing sensors mic2 prs0. i brought to the repair shop, changed the charging port, it only last for a day then it keeps restart again til today. do you know which part am i missing ?😅
Great video! What if the panic log analyzer can't detect any panic logs? There are multiple panic full files...reinstall the analyzer? It's an iPhone 11 Pro Max.
i haven't seen that myself so i'm not sure. but the principle remains the same, check what the panic logs says & see what "missing sensors" are missing
I have an iPhone 13 Pro. It started restarting randomly, definitely more than 3 minutes (maybe every 30 minutes?). I haven’t dropped it or anything since I got it. The only thing I can think of is it’s in front of my car AC for a while sometimes. I have four panic-full-2022-05-23…ips files. What do you think is the issue?
Hi how are you brother I have one iphone x turn off after 2 or 3 then not turning on unless I have to remove battery flaxy and put back when go's off then not even charge
Jesse - Can you recover my non-backed up data on iPhone 7 ( 512K) that is stuck in start-up boot loop for not enough free data. ( Need photos/deceased family & contacts. ) Happy to send/pay or view a video? Thx
@@VCCBoardRepairs I have some updates. The github-log analyzer tool said I should check charging and power flex so I bought a second fully functional iPhone SE and swapped logic boards but not batteries. Not much has changed, except now the restarts are more of random, not every 3mins and now the title of the logs changed from panic-full to just a termalmonitord bug type 210 missing sensors: TP1A, TP3R, TP4H, TP0Z (but not as panic-full), if there are some "panic-full" logs, they have AppleTristar2 no ID or something in there but they are more rare. If I swap also the batteries, I get the restarts pretty regular at 3mins and each restart is called panic-full instead of thermalmonitord in logs as previously... So this suggest that part of the problem was the battery and not the charging port but there is still some other problem somewhere. Is that a proof that the logic board IC is dead? Since it is a 128GB version, I would like to repair it instead of throw away. What are TP1A, TP3R ...? What should I do now? Many thanks
Thank you very much for your grat video. I have iphone 12 mini and get error missing sensors tp3r. if i separate the board and only test the upper board i get nothing error. Do you have any idea. i get this error after i solderd the board please see my video about iphone 12 mini thank you for answering
@@VCCBoardRepairs okay thank for answering if i separate the board and only test the upper board it work fine and before the handy fall down and destroy it work fine. Do you have any idea?
Hi, great video. Greetings from Romania :) I was wondering if you could also help me. I have a panic log from a Iphone 11 with indicates as posible issues Nand or Wi-fi. What schould I check? thank you
Excellent.. a question, I have a 14promax but at all times only the screen turns off, not the cell phone, and I have to wait for it to turn on again, any suggestions? I don't get the panic full files...
HI! I have a question... in my panic-full folder shows "AOP PANIC K2-Bosch control channel write failures". What can it be? The charging port was replaced, i dont think its original. Replacement on original will fix the problem?
Hi Jesse I checked the analytics and it says "panicString" : "panic(cpu 4 caller 0xfffffff013ba23f0): \"i2c0::_checkInterrupts error interrupt; What error is this?
Hai Thanks for the information. I have same issue on my iphone 11 pro. As guided by you in this video it is showing that “Refresh Count over limit error”. Could you please help me to fix this issue.
Hi can you please help with the diagnosis my iphone 13 is failing and i cant understand the panic logs. The service center guy says to replace the motherboard.
tx for your tutorial! just yesterday i'm faced with a similar issue - except that my iphone X only keeps restarting when it's idle/locked every few mins for the entire day & night to the point i removed auto-lock to stop it as it's completely fine when it's not idle/locked. checked batt health, storage/memory, bad apps, etc. - everything OK so i thought the only final resort was to reset or send to the iphone service centre to replace some hardware parts. then i read somewhere to try to drain the phone batt and then recharge to 100%. i did this morning and amazingly - the problem seems to have been resolved!!! i hope it stays fine this way...
Yes, Apple doesn't really do any repairs, besides screens & batteries. For anything like this, you'd have to go with an independent repair shop to repair it
I’ve been to some shops here Tucson AZ and not a single one said they can fix it. If Apple can’t do it and that’s the answer I get from other shops what do I do
Reach out to someone who specializes in diagnostics and board level repairs like myself Send me a message for a quote: www.vccboardrepairs.com/contact-us
Very informative and helpful I wish I could have the same equipment so I can DIY myself to fix the issue on my IP XS as I booked it in iphix belfast yesterday and still cant figure out whats the issue if my XS that keeps on restarting hope that they will watch this video and fix ny phone really soon. Shout out to iphix belfast and thanks Mr. Cruz!
hi i have a problem.. when i click read logs it start a bar to fill but when its done it says no logs find but when i go to privacy for analytics i can find a lot of panic logs full/base i tried so meny way’s but it still can’t read logs from my phone.. can u help mate?
Hi Jesse. My panic full log is preventing me from backing up my photos to iCloud. How can I fix it as I’ve already got a new phone. Note that my restart happens less often and my phone can function for 30 minutes.
@@VCCBoardRepairs Xiaoxia Li 41秒钟前 I checked one dated June 17 and the bug type is 210. "user space watchdog timeout: no successful checkins from thermalmonitord since wake.......totally lost.....
If you're a technician, I'd recommend posting a screenshot of your panic log in my group: www.vccboardrepairs.com/vcc-fb-group If you're not a tech, I'd recommend going to a local repair shop, share this video with them and see if they can help
@@VCCBoardRepairs I am not a technician......my warranty expired and the back screen was broken. Apple store asked for almost $800 to fix the system and the screen (cannot be separate).I will try to find a cheaper repair store. Thank you very much.
Nice one, actually what took me come across this is because am facing this 2 to 3 minutes rebooting issue on iPhone 12 pro max, so by follow this instructions on this video I think I'll get to the bottom of the issue. Thanks
Hey, I finally installed the program and you guess is right what I got is prs0 as you said so am going to replace the charging flex and I'll give you feedback
Thanks so much the phone is perfectly working now actually I service the charging flex with alcohol spirit because there’s signs of liquid on the vibrator clip
Hey what does kernel data abort mean ? And can you please let me know a solution. I just bought it like 2 months ago. Its iphone 12. It ll be very helpful if you would reply
That a great vid, so what about Missing sensor : TG0B? the problem is on Charging port right? because am facing this issue right now. I'm using iPhone 6s plus with IOS 14.6 IDK if it a software problem. also I cant updated it because randomly restart I tried to update on iTunes but it still restart :(
Hi Jesse, i have an iphone 11 restarting every 3 min but only in usage, if its in standby it wont restart. I tried 4 different OEM/Original power flexes and charchingports and still got missing Sencor Mic2. For my Test i only connected Powerflex + Charchingport (without taptic/speaker etc) Do i maybe need to connect some other Flexes? Iam freakin out and iam sure its not the sandwiches. Could be my aftermarket Battery be faulty?
@@VCCBoardRepairs I will check that, so nothing else needs to be plugged in right? Atm I Found a missing Contakt on the Powerflex i bought, so i will send it back and hopefully the 5th one will work
Jesse, the power button flex fixed my problem like you showed us on this video. I was able to download ios update w/o phone restarting. TY for your help.
Hi Jesse, thanks for all the great information. Its hard to find a good tech that knows how things actually work! Got my iPhone 8 at the store to be fixed and they replaced the IC chip/board saying that was the issue (keep restarting) Issue returned shortly after got the device back. Tried recovery etc nothing helps. Once I recover from backup or start as new device it works for a short amount of time then starts rebooting again and again. Any advise? Iil check the log as you mentioned and hope I find something there.
greetings! I have an iphone 11 that reboots every 3 minutes. The information from the panic log appears in all the logs that I have Possible Issues Charging Port Flex Power Button Flex. In 3utool I get this: Problem connecting CPU and peripherals, panic cpu x caller . So should I change the charging port for a new one and the power button flex or just make sure they are well connected? It should be noted that the device fell and the screen broke and it was replaced by a generic one. but the wifi does not turn on or the flashlight apart from the automatic restart.@@VCCBoardRepairs
Hi my iphone 11 restarts every 3 minutes on the panic report writes mic2 Prs0 also I state that the power button is not connected. Jesse in your opinion what is it about?
This issue is caused by a hardware problem inside the phone. A phone charger will not fix the issue, unfortunately. If you'd like to mail it into us for evaluation & repair, send me a message through my website: www.vccboardrepairs.com/contact-us
hello Iphone 11 pro max 3 days ago, it stopped by itself once, I pressed the power button, it came on, this happened once, would it be a problem and panic full error was reported on the same day in the settings
@@VCCBoardRepairs plug it in without removing the old one. Like you plugged in a different charge port flex. I disconnected the charge port flex from motherboard but still restarts at 3 minutes. Where can you get good parts to use for iphones?
When I replaced my back glass I had melted my mic but no issues whatsoever until I took it get the glass replaced and they use the laser after I got it back it started rebooting every 3 minutes, what could be the issues or thoughts?
greetings! I have an iphone 11 that reboots every 3 minutes. The information from the panic log appears in all the logs that I have Possible Issues Charging Port Flex Power Button Flex. In 3utool I get this: Problem connecting CPU and peripherals, panic cpu x caller . So should I change the charging port for a new one and the power button flex or just make sure they are well connected? It should be noted that the device fell and the screen broke and it was replaced by a generic one. but the wifi does not turn on or the flashlight apart from the automatic restart.
@@VCCBoardRepairs I understand but I have a doubt I already saw it 5 times and my doubt is that the (mic2 and prs0) came out for you and what you changed was the battery charge flex that came out two times, but for me, it only comes out all over the LOG {mic2} and the flashlight doesn't work for me. So, do you think that the safest thing to change is the power button and flashlight flex? my panic(cpu I caller Oxfffffff0235984b8): userspace watchdog time.ut: no successful checkins from thermalmonitord since load service returned not alive with context : is alive func retumed unhealthy : current 3bfffffffffff, mask lffffffffffff, expected Ifffffffffff. SD: 1 BC: 1 RC: -1 BS: 1, Missing sensor(s): mic2
After dropping my iPhone 11 it shows that mic2 missing, restarts every few minutes and also the power button isn’t working anymore. I need to use touch to wake feature to turn on the screen. I guess replacing the power flex cable will solve the problem?
@@VCCBoardRepairs Oh ok. So that means that the technician may need to replace the motherboard as well if changing the powerflex cable dosent solve the problem. Seems a bit expensive. Ughh😓
Hi Jesse Mine saying "panic(cpu 1 caller Oxffff((fO1ce70c88): AOP PANIC - No pulse on Ox1119dc0 - power(2) No pulse on 0x1119dc0" iphone Xr. What could be the possible issue, please me sorry for my english😢
My brand new iPhone 13 pro had a purple screen and then restarted. What irritates me the most about his is that the phone is less than a month old. I checked the logs and it says “panic full”. Should I send this in to the Genius Bar ? Or should I just leave it. This only happened once and my phone still feels like normal.
@@VCCBoardRepairs hi , my 13 pro max had a similar issue. I checked using the analyser tool as you suggested and it says “could not identify any issues “ , I don’t see the issue now. Is there anything I’ve to do more or should I leave this issue behind and move on ? Please do help me . Liked and subbed your channel 😇
Hi Jesse. I have an Iphone SE 2020 with the Mic1 sensor error. Do you know of any way to do data recovery on the phone? since it impossible to do a icloud backup in the 3 minute window.
Hi. The phone has to be repaired in order to get the data off of it. If you're in the USA, you can contact me for a quote: www.vccboardrepairs.com/contact-us
@@VCCBoardRepairs Hi Jesse. Thank you for the reply. We ended up airdropping all the necessary data off the phone, in the 3 minute intervals 🤷♂ But thanks anyway.
Question i have a iPhone 11 checking the analytics I see code prs0 missing sensor thermal monotype d however my charging port still works can get a full charge but still reboots after three minutes so would you still suggest a replacement of the charging port or power button flex ? Or could it be a motherboard issue?
Prs0 means there's an issue with the charging port flex. Doesn't matter if it charges ok, since the charging port has multiple functions, not just charging.
Just wondering if the charge port is the issue , if i déconnect it from motherboard, the phone should work ? Or it has to be connected ? I have a prs0 on 12 pro max. Deconnected the charging port and it's still rebooting. I tried motherboard in other 12 pro max body and it works. Any tips ?
Buy them from a reputable parts seller. For example: www.injuredgadgets.com/apple/iphone/iphone-x/premium-charging-dock-flex-for-iphone-x-space-gray/?acc=3d2d53e5abcd70e24cc444935b88e6ac21
Hi, can you kindly guide me. I have an iPhone XR and recently it's been very glitchy and keeps restarting every 20 min. I checked the analytics data, it says panic full: "userspace watchdog timeout: no successful checking from wifid in 180 seconds." How to fix this issue? I downloaded the panic log analyzer but it's unable to detect my phone.
Usually TG0B means battery data is missing Due to damaged battery connector Bad battery Or the battery isn't making good contact with the battery connector
Wow, thank you so much! Thats awesome. I´ve had problems with the 11 series when using the laser machine! Always removed all components while using the laser machine, but still the phone would reboot after reassembeling! It make sense that its the power-button cable that was causing it! That you so much! :) :) :) Great to know how to read the panic log!
Mr.Cruz i have the same problem with my iPhone Xs it reboot every 2-3 minutes but in panic logs for me it shows 0 Prs0 sensor missing! What can be the problem?
Hello, mine 11pro restarting randomly sometimes after 30 minutes sometimes after 2hours since last restart. Logs says it’s AOP PANIC - SCMto:3 - prox(7) what does it mean?
@@przemeklkskate This is something I should be able to repair. If you are in the USA, contact me for a quote: www.vccboardrepairs.com/contact-us If you're outside of the USA, you'll need to find a reputable repair shop to help you.
Hi jesse please reply to me, i did what you have said but in the possible issues it said " Could not identify any issues" but its still restarting. what could be the problem? pls help
Hi. Well it's hard to say without looking at it myself. if you're not a technician, I'd recommend stopping by a local repair shop to have them help you solve it.
Please I need help My iPhone X has the same problem but it restarts randomly “ about twice a week “ My concern is could this problem get worse or cause damage to the device Or it’s just about restating.. Thank you so much..
Hi how are you brother I have one iphone xr when I make on coming on but after 1mint go off sometime comes on show screen after opening screen lock go off sometime sting on for 2 minutes
is it can resolve if i reset all content and setting on my iphone xr? my problem was it hang and keep restart again and again after 10 second. ive done checking on analytics and there is a lot of panic here. i no longer to use idevice panic log analyzer. so how?
Hello Coach. First of all thanks for your videos. My Idevice Panic Log is not detecting my iphone SE 2020. Im having the 3 minutes reboot problem. Its actually interesting because it detected once and never dectected anymore. Do you have any clue on what it could be? Thank you in advance
Hi Jesse, this what appear on possible issues, what does these mean? U4700 Big Audio Codec IC Baseband/NFC i2c0 line U2700/U6110/J6400 NAND Wi-Fi Module edit: panic(cpu 1 caller 0xfffffff01d349300): "i2c0::_checkBusStatus SCL is stuck low; last read status 00010108 int shadow 00190100 xfer 00000000 fifo 00000000 for device ad5860"
Very informative video. Thanks. And i have one question, my problem is missing sensors mic2. So i need to replace the same. If i buy power flex from mobilesentrix, will it works without rebooting?
Assuming it's not a board issue, then replacing the power button flex, it should work, If it doesn't, it's probably a bad power button flex or a sandwich separation issue
I am having a similar issue. However, my phone only restarts if I am not using it. I have one panic log for my data and it consistently states that a resume link failed (detect quiet). What could this possibly mean? I am unable to use your panic log reader as I am using apple and Mac. Thank you for all of your help and very informative video!
Hi,I have a iphone 12 pro,It’s earpiece speaker is glitching it works sometimes and it doesn’t when it doesn’t works and i try to make a phone call the phone freezes and restarts again and again and again and when the earpiece speaker works it makes some weird sound before playing some media please reply
what happens when the phone reboots but panic log analyzer nor 3utools can give those reports, on the phone log there is DumpPanic about Siri. anyone know the issue could be?
@@VCCBoardRepairs mc1 is bad. What’s funny it does it while charging also. After a while it stops restarting but I’m still changing the port. TY for helping us with your videos.
Hi and thanks for your great videos! I've changed the charging flex on my iPhone SE 2020, the issue didn't change - still 3 mins reboot from mic1 panic until last night I ran a diagnostic tool and it stopped rebooting for about an hour. When I verified that I had just ran a diagnostic app (phone doctor plus) that diagnosed all of the sensors as having good health. I don't know if that was a coincidence or not. Then it started rebooting again every 3 mins and then the morning after it again stopped rebooting and lasted about 20 minutes. Now it is back to rebooting again every 3 minutes. Ran the diagnosis just in case. The lower microphone works just great by the way, tested with iOS audio recorder app. Would you have any idea as per why is this happening? What would recommend as next step to look into? Thank you
i restored my iphone, so i need to set it up before i can access settings and view the panic logs. My phone restarts before i can get thru the setup problem Is there a way around this?
Greetings from Turkey 🖐️ My iPhone 11 pro turns off and on every 3 minutes. I changed the power flex, i changed the charge flex, the problem still persists I am getting mic2 error in panic log please help 🙏
Read more about the rest of the panic logs & common solutions: vccboardrepairs.com/panic-log-list/
Thanks so much bro
Thanks for your videos. My iPhone 12 Pro Max is 16 months old and it has restarted twice in 16 months. Is this a serious problem? Today it restarted while watching a RUclips video. Is this is a serious problem? Any fix for this?
Checked your list. Doesn't have this one "SOCD report detected: (AP watchdog expired)", from my iphone 14 plus
@@Crazysummerdayssame happened with my Ipad Air, what's the solution for it
@@fuuredfin7791yes it does shows it on my ipad Air m2
3 times this man has helped me, thank you Jesse, thought I had a Nand issue, found out it was my PBF
Glad to hear that!
This man knows his stuff. SORTED THANK YOU 🎉
Awesome. Thank you!
How bro?
Watch the video. I literally explained everything in detail lol
Hi Jesse, my iphone 11 pro max show below issues: charging port flex / pwer button flex/ NAND/ Wi-Fi Module
how to fit it.
Subscribed thank you bro only channel with a proper informational video about this issue that you would have to watch 10 other videos that are half nonsence to find
Thank you very much!
Hello! I hope you respond to this. When i do this and saw that my logs say "missing sensor(s) TG0B TG0V" what are those mean?
Those are generally related to the battery or battery data line.
well explained ! i have a question tho, my panic report shows that : missing sensors mic2 prs0. i brought to the repair shop, changed the charging port, it only last for a day then it keeps restart again til today. do you know which part am i missing ?😅
Great video! What if the panic log analyzer can't detect any panic logs? There are multiple panic full files...reinstall the analyzer? It's an iPhone 11 Pro Max.
i haven't seen that myself so i'm not sure. but the principle remains the same, check what the panic logs says & see what "missing sensors" are missing
Is there a version of the analyzer for mac? Feels ironic that the apple iPhone analyzer is only available for windows computers.
Currently, this tool has only been developed for Windows. It was created by an independent developer, so that's why it's made on Windows, not Mac.
Is this the same for iPhone SE 2020? Because I get missing mic1 sensor after not as high drop that even left no signs outside
Check out this video about the SE2020 3 minute restart
ruclips.net/video/GSH2Y-Sp3Nk/видео.html
I have an iPhone 13 Pro. It started restarting randomly, definitely more than 3 minutes (maybe every 30 minutes?). I haven’t dropped it or anything since I got it. The only thing I can think of is it’s in front of my car AC for a while sometimes. I have four panic-full-2022-05-23…ips files. What do you think is the issue?
I'd recommend watching the video in full to get an idea of what to do & how to read the panic log files.
Same here
Hi how are you brother I have one iphone x turn off after 2 or 3 then not turning on unless I have to remove battery flaxy and put back when go's off then not even charge
Try a new charging port.
Hi, I'm from China, I saw your content, thanks for your videos, I learned a lot. Thank you and I congratulate you.
Awesome! Thank you!
Jesse - Can you recover my non-backed up data on iPhone 7 ( 512K) that is stuck in start-up boot loop for not enough free data. ( Need photos/deceased family & contacts. ) Happy to send/pay or view a video? Thx
Yes possibly. If you're in the USA, contact me for a quote: www.vccboardrepairs.com/contact-us
Hi, mine Iphone SE shows panic because of missing sensors: TP1A, TP3R, TP4H, TP0Z. What should I replace in this case? Thanks!
Never seen that before. Maybe rule out bad parts.
Mine is doing the same thing did you ever get it to work?
I would suggest trying known good parts. Like known good screen, battery, charging port, etc
I transferred the logic board into a different iphone and it the error persists.
@@VCCBoardRepairs I have some updates. The github-log analyzer tool said I should check charging and power flex so I bought a second fully functional iPhone SE and swapped logic boards but not batteries. Not much has changed, except now the restarts are more of random, not every 3mins and now the title of the logs changed from panic-full to just a termalmonitord bug type 210 missing sensors: TP1A, TP3R, TP4H, TP0Z (but not as panic-full), if there are some "panic-full" logs, they have AppleTristar2 no ID or something in there but they are more rare. If I swap also the batteries, I get the restarts pretty regular at 3mins and each restart is called panic-full instead of thermalmonitord in logs as previously... So this suggest that part of the problem was the battery and not the charging port but there is still some other problem somewhere. Is that a proof that the logic board IC is dead? Since it is a 128GB version, I would like to repair it instead of throw away. What are TP1A, TP3R ...? What should I do now? Many thanks
Nice and educational! Love this software, and thanks for all the links!
Glad you enjoyed it!
Thank you very much for your grat video. I have iphone 12 mini and get error missing sensors tp3r. if i separate the board and only test the upper board i get nothing error. Do you have any idea.
i get this error after i solderd the board please see my video about iphone 12 mini
thank you for answering
I think TP3R is due to a bad screen. I would suggest to test with known good parts.
@@VCCBoardRepairs okay thank for answering if i separate the board and only test the upper board it work fine and before the handy fall down and destroy it work fine. Do you have any idea?
Beautifully explained
Thank you so much 🙂
Hi, great video. Greetings from Romania :) I was wondering if you could also help me. I have a panic log from a Iphone 11 with indicates as posible issues Nand or Wi-fi. What schould I check? thank you
Excellent.. a question, I have a 14promax but at all times only the screen turns off, not the cell phone, and I have to wait for it to turn on again, any suggestions? I don't get the panic full files...
HI! I have a question... in my panic-full folder shows "AOP PANIC K2-Bosch control channel write failures". What can it be? The charging port was replaced, i dont think its original. Replacement on original will fix the problem?
I would suggest you get a known good charging port & try that.
@@VCCBoardRepairs thanks, one more question.. is it possible that AirDrop and NFC doesnt work because of the not original charging port?
Hi Jesse I checked the analytics and it says "panicString" : "panic(cpu 4 caller 0xfffffff013ba23f0): \"i2c0::_checkInterrupts error interrupt;
What error is this?
Check the i2C0 line.
You know where to buy a power flex in Australia, I bought few they don’t work, flash light turns on but it still reboots
I'm not sure. I buy mine in the USA
Hai
Thanks for the information. I have same issue on my iphone 11 pro. As guided by you in this video it is showing that “Refresh Count over limit error”. Could you please help me to fix this issue.
i'm not sure.
Hi can you please help with the diagnosis my iphone 13 is failing and i cant understand the panic logs. The service center guy says to replace the motherboard.
Hi jesse, on my iPhone XR, it says missing sensor(s): TG0B TG1B. What does that mean?
I cover this in my latest video: ruclips.net/video/V_GEGB0lerU/видео.html
tx for your tutorial! just yesterday i'm faced with a similar issue - except that my iphone X only keeps restarting when it's idle/locked every few mins for the entire day & night to the point i removed auto-lock to stop it as it's completely fine when it's not idle/locked. checked batt health, storage/memory, bad apps, etc. - everything OK so i thought the only final resort was to reset or send to the iphone service centre to replace some hardware parts. then i read somewhere to try to drain the phone batt and then recharge to 100%. i did this morning and amazingly - the problem seems to have been resolved!!! i hope it stays fine this way...
Bro we’re same issue i will try this method
I’m currently expediting this and I just left the Apple Store, they recommend a restore or a new phone. I will try this.
Yes, Apple doesn't really do any repairs, besides screens & batteries. For anything like this, you'd have to go with an independent repair shop to repair it
I’ve been to some shops here Tucson AZ and not a single one said they can fix it. If Apple can’t do it and that’s the answer I get from other shops what do I do
Reach out to someone who specializes in diagnostics and board level repairs like myself
Send me a message for a quote: www.vccboardrepairs.com/contact-us
My IPhone XS keep restarting only when not using it… That means no any issue when use it… log report says Possible issues U2700/U6110/J6400
Ah not sure what that means. I would start testing with known good parts.
Same like me bro did u know what problem it is ?
Very informative and helpful I wish I could have the same equipment so I can DIY myself to fix the issue on my IP XS as I booked it in iphix belfast yesterday and still cant figure out whats the issue if my XS that keeps on restarting hope that they will watch this video and fix ny phone really soon.
Shout out to iphix belfast and thanks Mr. Cruz!
Send them this video!
It's most likely the charging port
Approx. how much is the cost to fix this issues? My iPhone Xs got liquid damage went inside washer. Mine has the 2-3 min reboot issue too.
If you're in the USA, send me a message for a quote: www.vccboardrepairs.com/contact-us
hi i have a problem.. when i click read logs it start a bar to fill but when its done it says no logs find but when i go to privacy for analytics i can find a lot of panic logs full/base
i tried so meny way’s but it still can’t read logs from my phone..
can u help mate?
I'm not sure. Never done a core replacement
I'd recommend you ask in my group
Https://www.vccboardrepairs.com/vcc-fb-group
Same problem here
Hi Jesse. My panic full log is preventing me from backing up my photos to iCloud. How can I fix it as I’ve already got a new phone. Note that my restart happens less often and my phone can function for 30 minutes.
hello, what to do if the panic log says this one, missing sensor TG0B (the device does not see the battery)
TG0B usually means a bad battery or some battery data line issue
Hi Jesse, my 12 pro restarted every 2 minutes from yesterday. I even do not have time to read the panic logs, how can I fix it?
You should have plenty of time to access the panic logs.
Just have to be very fast
@@VCCBoardRepairs
Xiaoxia Li
41秒钟前
I checked one dated June 17 and the bug type is 210. "user space watchdog timeout: no successful checkins from thermalmonitord since wake.......totally lost.....
If you're a technician, I'd recommend posting a screenshot of your panic log in my group: www.vccboardrepairs.com/vcc-fb-group
If you're not a tech, I'd recommend going to a local repair shop, share this video with them and see if they can help
@@VCCBoardRepairs I am not a technician......my warranty expired and the back screen was broken. Apple store asked for almost $800 to fix the system and the screen (cannot be separate).I will try to find a cheaper repair store. Thank you very much.
Find an independent repair shop to have it fixed :)
Nice one, actually what took me come across this is because am facing this 2 to 3 minutes rebooting issue on iPhone 12 pro max, so by follow this instructions on this video I think I'll get to the bottom of the issue. Thanks
Oh that's great! I'm going to make a guess that it's the charging port most likely.
So you'll see "Missing sensors: Prs0" or "Mic1".
I can install the program on my PC windows 7 error ( setup-exe-entry point not found)
Hey, I finally installed the program and you guess is right what I got is prs0 as you said so am going to replace the charging flex and I'll give you feedback
Make sure it's an OEM or Premium flex
Thanks so much the phone is perfectly working now actually I service the charging flex with alcohol spirit because there’s signs of liquid on the vibrator clip
Hey what does kernel data abort mean ? And can you please let me know a solution. I just bought it like 2 months ago. Its iphone 12. It ll be very helpful if you would reply
That's not enough information to know what's going on. If you're not a tech, I'd recommend taking your phone to repair shop to have it diagnosed.
Can you fix panic full - Kernel data abort. at pc?
I dont know
i found this video because data stop working, any tips to do to avoid this issue? panic log analyzer says possibile issues are NAND and Wifi module
Could be a hard drop that caused it. Not much you can do, as iPhones tend to have lots of failures.
@@VCCBoardRepairs seems legit, but i've never dropped my iPhone and externally is in pristine condition
Thanks! I have "Missing sensor(s): TG0B TG0V" What is likely to cause that?
The phone is unable to read the battery data
Jesse, checked panic log for se 2020 and said mic 1 sensor. Can you slave charge port? I did but still restarted. Does it have to be installed?
That a great vid, so what about Missing sensor : TG0B? the problem is on Charging port right? because am facing this issue right now. I'm using iPhone 6s plus with IOS 14.6 IDK if it a software problem. also I cant updated it because randomly restart I tried to update on iTunes but it still restart :(
That means there's missing battery data.
So it could be the battery
The battery connector
Or an issue with the battery data line circuit
I have a iPhone Xs max reading Prso/ N service: Backboard. Is this 2 issues or 1?
Rewatch the video 🙏
Hello good day, I use an iPhone 7 and there are no panic full. What could be the issue please?
I'm not sure. You'll have to do some troubleshooting & see. Like try known good parts.
Hi Jesse, i have an iphone 11 restarting every 3 min but only in usage, if its in standby it wont restart.
I tried 4 different OEM/Original power flexes and charchingports and still got missing Sencor Mic2. For my Test i only connected Powerflex + Charchingport (without taptic/speaker etc) Do i maybe need to connect some other Flexes? Iam freakin out and iam sure its not the sandwiches. Could be my aftermarket Battery be faulty?
Either you have defective power button flexes or you have a sandwich issue.
Watch the end to see how to check for sandwich separation issue.
@@VCCBoardRepairs I will check that, so nothing else needs to be plugged in right? Atm I Found a missing Contakt on the Powerflex i bought, so i will send it back and hopefully the 5th one will work
can i download idevice log analyzer if my laptop is macbook air? cause its not working on my laptop
No, it's Windows only software.
Followed your video and panic lig said Mic 2 so I ordered a new power button flex. Will let you know how it turns out. TY Jesse.
Jesse, the power button flex fixed my problem like you showed us on this video. I was able to download ios update w/o phone restarting. TY for your help.
great!
Hi Jesse, thanks for all the great information. Its hard to find a good tech that knows how things actually work! Got my iPhone 8 at the store to be fixed and they replaced the IC chip/board saying that was the issue (keep restarting) Issue returned shortly after got the device back. Tried recovery etc nothing helps. Once I recover from backup or start as new device it works for a short amount of time then starts rebooting again and again. Any advise? Iil check the log as you mentioned and hope I find something there.
You'll have to review the panic log & see if you can find any clues to what's causing the restart.
greetings! I have an iphone 11 that reboots every 3 minutes. The information from the panic log appears in all the logs that I have Possible Issues
Charging Port Flex
Power Button Flex.
In 3utool I get this: Problem connecting CPU and peripherals, panic cpu x caller . So should I change the charging port for a new one and the power button flex or just make sure they are well connected? It should be noted that the device fell and the screen broke and it was replaced by a generic one. but the wifi does not turn on or the flashlight apart from the automatic restart.@@VCCBoardRepairs
Please help my logs showing BC 1 missing sensor (s) mic1 for iPhone Se 2nd Gen. What that mean please
Mic 1 is the charging port
Try another one
@@VCCBoardRepairs I did but iPhone still keep restarting
Diode mode the charging port connector
Hi my iphone 11 restarts every 3 minutes on the panic report writes mic2 Prs0 also I state that the power button is not connected. Jesse in your opinion what is it about?
Pay close attention to the video. I explain it.
Hi, i have an iphone x, and my panic full says SD:1 BC:1 Missing sensor(s): mic1
service: backboardd
do i have to replace the charging flex?
If you get mic 1, then yes try a new charging port
@@VCCBoardRepairs alright thank you💖
I will write an update if it works.
@@VCCBoardRepairs hi, it works, and i got it installed by myself properly using your video, You saved me a lot of money 😂 thanks a lot❤️❤️
That's great news! 🙌
Hi. What does missing censor: tgob mean. I already replaced battery but keeps restarting
It means battery data is missing. check the connector for damage
In data analysis I have full panic but when I read the logs it says no panic logs found. Help me solve this problem
Hello,mine is showing me SD-1 Bc-1 missing sensor,Prso
What does it mean I should do?
Hi. Did you get a chance to watch the whole video?
My iphone xs max recently started doing this. Do I have to repair it or is can the problem be fixed if I just buy an original charger from Apple?
This issue is caused by a hardware problem inside the phone. A phone charger will not fix the issue, unfortunately.
If you'd like to mail it into us for evaluation & repair, send me a message through my website: www.vccboardrepairs.com/contact-us
@@VCCBoardRepairs okey, what can have caused the problem?
@@elsaolsson8129 Unfortunately, it's hard to answer that question without looking at the device in hand.
if my panic full mostly shows tg0b and tg0v what is needed to fix??? and will it be an easy fix??
battery
i am seeing a battery swi, NAND what should be done?
hello Iphone 11 pro max 3 days ago, it stopped by itself once, I pressed the power button, it came on, this happened once, would it be a problem and panic full error was reported on the same day in the settings
if it only happened once, i would say maybe just a software glitch.
Jesse, can the power flex be slaved in like you did on the charge port?
I'm not sure what you mean
@@VCCBoardRepairs plug it in without removing the old one. Like you plugged in a different charge port flex. I disconnected the charge port flex from motherboard but still restarts at 3 minutes. Where can you get good parts to use for iphones?
When I replaced my back glass I had melted my mic but no issues whatsoever until I took it get the glass replaced and they use the laser after I got it back it started rebooting every 3 minutes, what could be the issues or thoughts?
Watch this video for the solution 😀
So I’m guessing it’s my charging port I checked Analytics data im getting a missing sensor prs0
100% the charging port is related
So try a new one
Appreciate it a lot video helped me hopefully that’s just problem
I get an issue where it says 'AOP PANIC - No pulse on' what could this mean?
I’ve only had my iPad panic once. Dart USB error. What does this mean?
greetings! I have an iphone 11 that reboots every 3 minutes. The information from the panic log appears in all the logs that I have Possible Issues
Charging Port Flex
Power Button Flex.
In 3utool I get this: Problem connecting CPU and peripherals, panic cpu x caller . So should I change the charging port for a new one and the power button flex or just make sure they are well connected? It should be noted that the device fell and the screen broke and it was replaced by a generic one. but the wifi does not turn on or the flashlight apart from the automatic restart.
you should watch the video again. i explain how to read the panic log to tell you how to find the root cause
@@VCCBoardRepairs I understand but I have a doubt I already saw it 5 times and my doubt is that the (mic2 and prs0) came out for you and what you changed was the battery charge flex that came out two times, but for me, it only comes out all over the LOG {mic2} and the flashlight doesn't work for me. So, do you think that the safest thing to change is the power button and flashlight flex?
my
panic(cpu I caller Oxfffffff0235984b8): userspace watchdog time.ut:
no successful checkins from thermalmonitord since load
service returned not alive with context : is alive func retumed
unhealthy : current 3bfffffffffff, mask lffffffffffff, expected Ifffffffffff.
SD: 1 BC: 1 RC: -1 BS: 1, Missing sensor(s): mic2
how much do you think that cost answer plz
How much does what cost?
if i want to fix the problem
Price will depend on the model. If you're in the USA, contact me for a quote: www.vccboardrepairs.com/contact-us
After dropping my iPhone 11 it shows that mic2 missing, restarts every few minutes and also the power button isn’t working anymore. I need to use touch to wake feature to turn on the screen. I guess replacing the power flex cable will solve the problem?
Possibly. Or the motherboard bottom layer has disconnected
@@VCCBoardRepairs Oh ok. So that means that the technician may need to replace the motherboard as well if changing the powerflex cable dosent solve the problem. Seems a bit expensive. Ughh😓
No need to replace. The motherboard can be repaired if you find a reliable and experienced technician
@mayank Singh have your issue been resolved, facing the same issue. If yes please let me know how did you manged?
HELP No pulse on 0x119f850 whats the problem? i have a blackscreen
i have no idea.
Hi Jesse Mine saying "panic(cpu 1 caller Oxffff((fO1ce70c88): AOP PANIC - No pulse on
Ox1119dc0 - power(2)
No pulse on 0x1119dc0" iphone Xr. What could be the possible issue, please me sorry for my english😢
Not sure. I would try known good parts first.
My brand new iPhone 13 pro had a purple screen and then restarted. What irritates me the most about his is that the phone is less than a month old. I checked the logs and it says “panic full”. Should I send this in to the Genius Bar ? Or should I just leave it. This only happened once and my phone still feels like normal.
If it's still under warranty, maybe check with apple about it
Bro i also have same issue with my 13 Pro Max. I think its a software glitch. Because purple screen glitch is only happening with Pro models.
I have same problem, my iphone 12 pro restart randomly and purple screen, can you solve that?
@@VCCBoardRepairs hi , my 13 pro max had a similar issue. I checked using the analyser tool as you suggested and it says “could not identify any issues “ , I don’t see the issue now. Is there anything I’ve to do more or should I leave this issue behind and move on ? Please do help me . Liked and subbed your channel 😇
Hi Jesse. I have an Iphone SE 2020 with the Mic1 sensor error. Do you know of any way to do data recovery on the phone? since it impossible to do a icloud backup in the 3 minute window.
Hi. The phone has to be repaired in order to get the data off of it. If you're in the USA, you can contact me for a quote: www.vccboardrepairs.com/contact-us
@@VCCBoardRepairs Hi Jesse.
Thank you for the reply.
We ended up airdropping all the necessary data off the phone, in the 3 minute intervals 🤷♂
But thanks anyway.
Question i have a iPhone 11 checking the analytics I see code prs0 missing sensor thermal monotype d however my charging port still works can get a full charge but still reboots after three minutes so would you still suggest a replacement of the charging port or power button flex ? Or could it be a motherboard issue?
Meant to mention I have a error message which states iPhone doesn’t recognize battery or camera so could it be due to a non genuine part?
Prs0 means there's an issue with the charging port flex. Doesn't matter if it charges ok, since the charging port has multiple functions, not just charging.
I have replace a new charging port flex but still restarting . Can u help me ?
hi i hope you can respond to this but my iphone 11 pro max is not getting detected bythe software may i ask for help pls
I'm not sure. Try another cable.
Just wondering if the charge port is the issue , if i déconnect it from motherboard, the phone should work ? Or it has to be connected ? I have a prs0 on 12 pro max. Deconnected the charging port and it's still rebooting. I tried motherboard in other 12 pro max body and it works. Any tips ?
you cannot test with the flex unplugged, as i explained in the video
How can we purchase an oem charge port?
Buy them from a reputable parts seller. For example: www.injuredgadgets.com/apple/iphone/iphone-x/premium-charging-dock-flex-for-iphone-x-space-gray/?acc=3d2d53e5abcd70e24cc444935b88e6ac21
Hi, can you kindly guide me.
I have an iPhone XR and recently it's been very glitchy and keeps restarting every 20 min. I checked the analytics data, it says panic full: "userspace watchdog timeout: no successful checking from wifid in 180 seconds."
How to fix this issue?
I downloaded the panic log analyzer but it's unable to detect my phone.
I'm having the same issue and panic log.....did you get yours fixed as yet? And if so what was the issue
Try an update or restore.
Where can you order oem flex cable?
HELP : mine is saying Missing sensor(s): TG0B TG0V , what do i need to replace?
Usually TG0B means battery data is missing
Due to damaged battery connector
Bad battery
Or the battery isn't making good contact with the battery connector
Wow, thank you so much! Thats awesome. I´ve had problems with the 11 series when using the laser machine! Always removed all components while using the laser machine, but still the phone would reboot after reassembeling! It make sense that its the power-button cable that was causing it! That you so much! :) :) :) Great to know how to read the panic log!
You're welcome. Check out my latest video on this topic: ruclips.net/video/V_GEGB0lerU/видео.html
I go into more detail
Mr.Cruz i have the same problem with my iPhone Xs it reboot every 2-3 minutes but in panic logs for me it shows 0 Prs0 sensor missing! What can be the problem?
Did you get a chance to watch the whole video? I address what it means when the panic log says Prs0 is missing
Hello, mine 11pro restarting randomly sometimes after 30 minutes sometimes after 2hours since last restart. Logs says it’s AOP PANIC - SCMto:3 - prox(7) what does it mean?
I see the word prox. So one would stand to reason, it has to do with the proximity sensor.
@@VCCBoardRepairs is it hard to repair?
@@przemeklkskate This is something I should be able to repair.
If you are in the USA, contact me for a quote: www.vccboardrepairs.com/contact-us
If you're outside of the USA, you'll need to find a reputable repair shop to help you.
@@VCCBoardRepairs I’m EU so I’ll search somewhere closer to me. Thanks you so much 🙏🏼
alright is the power port the main root cause however, my iphone don't have any volume it gives me Psr0
Hi jesse please reply to me, i did what you have said but in the possible issues it said " Could not identify any issues" but its still restarting. what could be the problem? pls help
Hi. Well it's hard to say without looking at it myself. if you're not a technician, I'd recommend stopping by a local repair shop to have them help you solve it.
Please I need help
My iPhone X has the same problem but it restarts randomly “ about twice a week “
My concern is could this problem get worse or cause damage to the device
Or it’s just about restating..
Thank you so much..
It depends on what's causing the issue. Did you try following the suggestions I show in the video, like checking the panic log?
@@VCCBoardRepairs
Yes I’ve checked it
One says: runInterruptMode Timed out waiting for interrupt
Other one: checkBusStatus SCL is stuck low
Hi how are you brother I have one iphone xr when I make on coming on but after 1mint go off sometime comes on show screen after opening screen lock go off sometime sting on for 2 minutes
is it can resolve if i reset all content and setting on my iphone xr? my problem was it hang and keep restart again and again after 10 second. ive done checking on analytics and there is a lot of panic here. i no longer to use idevice panic log analyzer. so how?
i'm not sure i understand your question.
Hello Coach. First of all thanks for your videos.
My Idevice Panic Log is not detecting my iphone SE 2020. Im having the 3 minutes reboot problem. Its actually interesting because it detected once and never dectected anymore.
Do you have any clue on what it could be?
Thank you in advance
Does 3u tools detect it?
hi bro, your app couldnt detect my iphone xs. how to fix ?
Check out my new video on this topic:
ruclips.net/video/V_GEGB0lerU/видео.html
Hey Jesse, I have a panic log called sensor array I don't know what that is and my phone restarts once in a while
Watch my latest video:
Watch this video for a tutorial on how to troubleshoot and read the panic logs
ruclips.net/video/C2687jnfDGQ/видео.html
Thanks man, Great video . Where are you based?
Thank you! Las Vegas NV
What about restarting iphone 12 pro only under 20 % battery with no panic , i putted the motherboard in other housing and problem still there ?
That sounds like a bad battery. I would try another
Hi Jesse, this what appear on possible issues, what does these mean?
U4700 Big Audio Codec IC
Baseband/NFC
i2c0 line
U2700/U6110/J6400
NAND
Wi-Fi Module
edit: panic(cpu 1 caller 0xfffffff01d349300): "i2c0::_checkBusStatus SCL is stuck low; last read status 00010108 int shadow 00190100 xfer 00000000 fifo 00000000 for device ad5860"
You'd have to check the i2c0 line on the board.
Very informative video. Thanks. And i have one question, my problem is missing sensors mic2. So i need to replace the same. If i buy power flex from mobilesentrix, will it works without rebooting?
Assuming it's not a board issue, then replacing the power button flex, it should work,
If it doesn't, it's probably a bad power button flex or a sandwich separation issue
@@VCCBoardRepairs ok where can i buy OEM or original power flex?
I buy them from mobilesentrix.com
@@VCCBoardRepairs ok thanks🙏
May you update if you change the power button flex and if it’s success
what about for the iPhone XR? I believe I am having a similar issue.
Ok great. The video explains how to read the panic log
I am having a similar issue. However, my phone only restarts if I am not using it. I have one panic log for my data and it consistently states that a resume link failed (detect quiet). What could this possibly mean? I am unable to use your panic log reader as I am using apple and Mac. Thank you for all of your help and very informative video!
Hi,I have a iphone 12 pro,It’s earpiece speaker is glitching it works sometimes and it doesn’t when it doesn’t works and i try to make a phone call the phone freezes and restarts again and again and again and when the earpiece speaker works it makes some weird sound before playing some media please reply
Could replacing the battery also help solve this problem?
Depends. If the battery is the issue, then replacing it will fix it
what happens when the phone reboots but panic log analyzer nor 3utools can give those reports, on the phone log there is DumpPanic about Siri. anyone know the issue could be?
Jesse, can I disconnect the charge port from the motherboard to see if it stops restarting?
No
@@VCCBoardRepairs mc1 is bad. What’s funny it does it while charging also. After a while it stops restarting but I’m still changing the port. TY for helping us with your videos.
Hi and thanks for your great videos! I've changed the charging flex on my iPhone SE 2020, the issue didn't change - still 3 mins reboot from mic1 panic until last night I ran a diagnostic tool and it stopped rebooting for about an hour. When I verified that I had just ran a diagnostic app (phone doctor plus) that diagnosed all of the sensors as having good health. I don't know if that was a coincidence or not. Then it started rebooting again every 3 mins and then the morning after it again stopped rebooting and lasted about 20 minutes. Now it is back to rebooting again every 3 minutes. Ran the diagnosis just in case. The lower microphone works just great by the way, tested with iOS audio recorder app. Would you have any idea as per why is this happening? What would recommend as next step to look into? Thank you
i restored my iphone, so i need to set it up before i can access settings and view the panic logs. My phone restarts before i can get thru the setup problem
Is there a way around this?
Greetings from Turkey 🖐️
My iPhone 11 pro turns off and on every 3 minutes.
I changed the power flex, i changed the charge flex, the problem still persists
I am getting mic2 error in panic log please help 🙏
Try the board in another OEM housing and see if that solves it
@@VCCBoardRepairs
I tried other housing but got the same error
Is it because it's not the original screen?🤔