correction, the GT 1030 are also out there as DDR4, running at half the capacity of the DDR5. You have been warned. I bought this as a low profile card only to find the MSI heatsink was too 'fat' for a single slot, ended up swapping it out for a GT 730 heatsink.
GT 1030 is pretty decent graphic card. I bought used one for $50 and it's doing good job. This overclock could help in gaming, but I also think it could help in video editing end rendering and speed up a lil bit.
I installed a lot of gt1030 cards on budget gaming pcs in the past 6-7 years or so, and i can tell that my go to OC (which worked on every single card, regardless of maker) was for the ddr5 version +150 core +400 memo, for the ddr4 +75 core + 125 mhz mem OC. These simply cannot fail, i have tested them on so much 1030cards that i can't tell the exact number by now.
I had a GT 620 from msi with a big heatsink and fan, but more importantly, the heatsink + fan was compatible with my asus GT 1030, i removed the heatsink and installed it on my card, it gave it way better temps and the memory can be cooled at the same time, i can now max out the slider for memory (+1000) and the core clock is +280, without touching the voltage, the temps are around 45 degrees under full load without any noise from the fan! This card is a trooper, i coupled this with a 720p monitor (1280 x 1024 used as a 1280 x 720 screen), you get black bars on top and bottom if you set it up right, but the gaming performance is awesome with this lil card, it's my favorite card to mess around with, i love this lil card!
Great Overclock With out Any Crash is 1-Simple OC +100MHZ Cores +100MHZ Memory 2-normal OC +100MHZ Cores +200MHZ Memory 3-High Overclock +100MHZ Cores +350MHZ Memory 4-Extram Overclock With out Any Crash +125MHZ Cores +375MHZ Memory 5-Ultra Over Clock Don't make This But Good Overclock +125MHZ Cores +400MHZ & +450MHZ Memory I am Make 5 Overclock But is not Good for GPU THE BEST OC FOR GPU IS Number 2 & 3 & You Can Put Number 4 When See The Teamperure is not High from 70C Degree
guys i have tested those overclocking profiles and they work perfectly fine on gta5 : profile1 : core clock: 160 | memory clock: 300 -recommended profile2 : core clock: 200 | memory clock: 350 -recommended profile3 : core clock: 200 | memory clock: 400 -recommended profile4 : core clock: 220 | memory clock: 420 i use profile3 by the way its more stable
For anyone interested in mining with this card, it is certainly possible. I had 2 of them mining nonstop for a couple years, hashing cryptonite, then zhash. Not really profitable these days, but easy to get running and fun to play with for sure.
I have colorful gt 1030 4gb ddr4 graphics card and when I overclocks, the mem clock can't get higher than +120 if I increase mem clock more than 120 my graphics card crashes.
sorry to say this but ur gpu wont be able to oc more than 130+ since your gpu vram is ddr4.Although it has 4gb ddr4 still it far weak than 2gb ddr5.Go search it on youtube ddr4 vs ddr5 gt 1030.The ddr5 version of 1030 has more than 30+fps than ddr4.Go search it
Best overclocking for me is +200 core +600 mem volt 1.10 I got a 24.7 fps Score 621 On unigine heaven high setting Low settings was 65.5 Score 1650 Maxed out at 111.0
I've got the Asus Silent (passive) GDDR5 2gb one, "superposition" started at 2487 score( min 15.2, Avg 18.61, Max 23.77 fps) , when I'd done I was at 2963 score (min 17.92, Avg 22.17, Max 28.3fps).... I maxed out at 260+ and 1000+ on MSI Afterburner, and tried GPU Tweaks but I don't like the UI, and want to be assured that if I crash it it won't reboot into the same settings that caused the crash...Aorus Engine let me set it at 260+ and 2000+ !!!! I tried it at that setting on Wahoo RGT (closest I'll get to gaming) and for the same other parameters my FPS in Medium went from average of 40 to 54fps!!!....One downside though to these passive cards is the heat. With no OC my card hits the 83c limit/cut off fairly easily, If I whip the side off the tower and put my desktop fan pointed at it on the lowest setting that drops to 56 even with 260/2000 OC !!! Some engineering and HVACS skills needed (This is my "backup" PC for films/music/browsing, so not critical to using RGT unless the other one dies on me with but with a GTX 1050Ti it needs no OC for my needs!).... so the cooling must be determining the performance in a huge way?!
GT 1030 in my opinion it's a good gaming graphics card, it's not the best but it's also not greatest ,like i'm playing rust on decent settings 1080p, with 35 and sometimes 40 fps, it may not be a lot of FPS, but for those who are used to play games over years with only 30-35-40 or 50 fps, it's still playable. To say it lass, GT 1030 in 2023 it's still a good GPU.
Hey great video but I am confused as I do the same settings as you for the overclock but I am getting a constant black screen then crash I have the DDR4 version. What would you recommend for the overclock? Thanks 👍
Would setting this card to these clocks and setting the resolution to 1440x900p or 1600x900p improve frames and performance higher with the clock boost?
Who has Gigabyte GT 1030 Silent (GV-N1030SL-2GL) is lucky, you can insanely OC the card but you need to add a cooler. With Aorus Engine, go to PROFESSIONAL MODE and: 1. GO up to 1690 MHz for GPU 2. GO up to 7498 MHz for Memory Extremely Stable at least in CS GO, over 160 FPS on any map @ Medium texture and High Shader, runs at 65-70 Celsius (cooler mandatory)
did the first one and my screen started flashing green like a seizure light then i full shut off my pc restarted it and it was fine and the msi afterburner setting was back to 0
🌍🌎🌏GRAPHICS CARD GIVEAWAY! -- CLOSED -We are running a giveaway for 4x NVIDIA GEFORCE GTX 1050 GRAPHICS CARDS! -This is a Worldwide Giveaway (Void where prohibited). -Giveaway runs until 13 August 2022, 12am UTC (+0) -Check out this video for more details: ruclips.net/video/tYXGPVmDsHU/видео.html
@@jeffery9272 For me stable is what i typed already - 210 core clock and 800 memory. You can start lower and test it in the game or software nothing to worry about. Even if it would be unstable it will reset to default.
no it's locked, and you'd need to solder on board afaik to enable it on these video cards. But it is no ptoblem, believe me. You wouldn't gain much performance by increasing voltage but would gain the very real possibility of frying your card.
I tried to overclock my DDR4 using the settings I found others using in the comments, but no luck so far. It's crashed like 7 times so far and when it doesn't crash, my nighttime color filter crashes. Starting to think it might not happen
No, I eventually gave up cause I was afraid I would damage it or something else in my computer. I can't miss out on performance I've never experienced.
4 месяца назад
@@RosyKitteh ye the mem clock doesnt go up 120+ if u go up 120 the graphics card crashes( only the ddr4 version sadly)
I use an SDDR4 gt 1030 from Galax, though not the best I am wondering if I set my core clocks to 220 and memory clock to 110, since for some odd reason, my memory clock can't go high in oc'ing get my core clocks can
@@XLSTech although I can go to 240 to the core clocks, my most gpu intensive game (genshin Impact) freezes and I don't like that I often use that game as my GPU benchmarker, but I still find it very odd that my memory clock cannot go higher than 110 (if I go 120+ my pc will act up but it won't crash)
Yes. In many cases overclocking can help games run smoother and/or with better graphical detail. Exactly how much all depends on the game, graphics card, and level of overclock.
my asus gt 1030 gddr5 did its best to boost performance on +170MHz core clock and +600MHz mem clock. It doesn't have any fans so the temps raised on 70*C stable.
it was stable 70 because at tgat threshold (70) it starts throttling to prtotect the circuitry. It isn't a problem though, passive cards vahe a great thermal mass, so throttling is usually very mild, like if you play a game 60 fps, it would maybe drop like 5 only.
i have the inno3d gt1030 2gb gddr5 model but when i overclocked it i started to see some really strange things like when i opened gta 5 i started to see some white dots and when i press the escape key it starts to show white squares what should i do
Update : so i quickly uninstalled msi afterburner while my pc is stable and now i think it's fine. Definitely not gonna play with this overclocking stuff again
you should never allow msi to start when you open your PC in case something like this happens. If you mess up the overclock you just restart the PC and it should work since msi is not opened yet
HELLO BRO...PLZZ REPLY ME ON THIS ONE..I HAVE SAME NVIDIA GT 1030 AND AMD A10 7800..I FOLLOWED THESE STEPS BUT MY SCREEN BECOMES COLORFUL WITH A LOUD BUZZ SOUND...SO PLZZ GIVE ME A SOLID SOLLUTION🙏
@@XLSTech iit crashed the whole pc with +200 +600 1.10 settings and i want to get it back to +185 +400 but when i reintal the aplication it just crash again like i never deleted it
HERE IS THE MOST EXTREME MOST SAFE OVERCLOCK!! I have successfully gotten the memory clock on the GT 1030 to be about 4000Mhz (Basically the maximum that MSI afterburner will let you do it). If you want advice, listen to me because I am an expert at it: ・Backstory: I need the most ultimate GT 1030, despite me not being a gamer and doing programmimg which doesn't need a gpu ・What you can do to improve performance: »»» 1. Slide the voltage to the maximum since it allowed the higher voltages to kick-in earlier and this means that if you will go to my crazy limits of 4Ghz, you have to slide it, it will NOT harm your GPU, it will help it to be more stable and hit 4000Mhz. »»» 2. Core clock should NEVER exceed +220Mhz. My GPU crashed after like 250, keep it stable at 220. ・TIPS: 1. Set fan speeds higher for better cooling, keep below 65°C if possible to not thermal throttle the GPU. 2. If you decide to try out my overclock, slowly put it to the max, do NOT put it all of a sudden, slow increases to avoid temporary screen glitches. 3. Close all software like: Discord(or set it to not use GPU hardware acceleration), RUclips, Edge or Google, check Task Manager and look at Dedicated Video Ram usage, close everything. 4. Go to Nvidia panel and set everything to performance (It will not change visual quality and get you an extra 2 - 3 fps which matter a lot in making everything smooth and rendering). IF YOU LISTEN TO ME, NOTHING BAD WILL HAPPEN, THE WORST YOU WILL HAVE TO DO IS RESTART YOUR PC. THE RESULTS WILL NOT DISSAPOINT
My mounting bracket was too big for my rig so I took it off, ik I should be careful with the gpu sagging but it don't weigh much for me to worry to much
correction, the GT 1030 are also out there as DDR4, running at half the capacity of the DDR5. You have been warned. I bought this as a low profile card only to find the MSI heatsink was too 'fat' for a single slot, ended up swapping it out for a GT 730 heatsink.
Thank you for this, i actually gained 11-20 fps on valorant. I'll still try playing with my settings for now. Thank you once again!
Glad to hear it. Sounds like a nice performance boost!
GT 1030 is pretty decent graphic card. I bought used one for $50 and it's doing good job. This overclock could help in gaming, but I also think it could help in video editing end rendering and speed up a lil bit.
i have 4, 2 asus and 2 gigabyte asus is passive giga is active cooling
I spent 7 years with 1030...
I even played some AAA titles which was quite pain.. but playable..
Yeh i play forza horizon 4 with it
wow,this is insane,my minecraft fps was 103....now its 200-250 and 150 with shaders thank you so much,you got a new subscriber
I installed a lot of gt1030 cards on budget gaming pcs in the past 6-7 years or so, and i can tell that my go to OC (which worked on every single card, regardless of maker) was for the ddr5 version +150 core +400 memo, for the ddr4 +75 core + 125 mhz mem OC. These simply cannot fail, i have tested them on so much 1030cards that i can't tell the exact number by now.
Great video, good production quality can't believe you don't have more subscribers
I had a GT 620 from msi with a big heatsink and fan, but more importantly, the heatsink + fan was compatible with my asus GT 1030, i removed the heatsink and installed it on my card, it gave it way better temps and the memory can be cooled at the same time, i can now max out the slider for memory (+1000) and the core clock is +280, without touching the voltage, the temps are around 45 degrees under full load without any noise from the fan! This card is a trooper, i coupled this with a 720p monitor (1280 x 1024 used as a 1280 x 720 screen), you get black bars on top and bottom if you set it up right, but the gaming performance is awesome with this lil card, it's my favorite card to mess around with, i love this lil card!
Great Overclock With out Any Crash is
1-Simple OC
+100MHZ Cores
+100MHZ Memory
2-normal OC
+100MHZ Cores
+200MHZ Memory
3-High Overclock
+100MHZ Cores
+350MHZ Memory
4-Extram Overclock With out Any Crash
+125MHZ Cores
+375MHZ Memory
5-Ultra Over Clock Don't make This But Good Overclock
+125MHZ Cores
+400MHZ & +450MHZ Memory
I am Make 5 Overclock But is not Good for GPU THE BEST OC FOR GPU IS Number 2 & 3 & You Can Put Number 4 When See The Teamperure is not High from 70C Degree
I can only overclock on the first OC, maybe bc it was pretuned prior to me getting it
Edit: turns out its cooling is not so good compared to others
Just crashed my pc
eres mi heroe
con el overclock del video me crasheo el pc pero con el tuyo funciona bien
I can only do the first 2 but hey, better than nothing
guys i have tested those overclocking profiles and they work perfectly fine on gta5 :
profile1 : core clock: 160 | memory clock: 300 -recommended
profile2 : core clock: 200 | memory clock: 350 -recommended
profile3 : core clock: 200 | memory clock: 400 -recommended
profile4 : core clock: 220 | memory clock: 420
i use profile3 by the way its more stable
For anyone interested in mining with this card, it is certainly possible. I had 2 of them mining nonstop for a couple years, hashing cryptonite, then zhash. Not really profitable these days, but easy to get running and fun to play with for sure.
Can u do an apex game play with this gpu?and what settings can u play on
@@balance7756 All low
@@VandashStumpedKnee do u have this gpu?
@@balance7756 I run on low and 1600 x 900 and I get about 60+ fps on arenas
Excellent video. Thanks bro. Will be doing this with my PNY GT 1030 GDDR5.
Glad you enjoyed it, thanks for watching! 👍
I have colorful gt 1030 4gb ddr4 graphics card and when I overclocks, the mem clock can't get higher than +120 if I increase mem clock more than 120 my graphics card crashes.
sorry to say this but ur gpu wont be able to oc more than 130+ since your gpu vram is ddr4.Although it has 4gb ddr4 still it far weak than 2gb ddr5.Go search it on youtube ddr4 vs ddr5 gt 1030.The ddr5 version of 1030 has more than 30+fps than ddr4.Go search it
@@iPlayRandomGames88 yes u r right. I should bought T400
I have the same video card, I have pixels on the screen after 300+
same for me i have the same card
Best overclocking for me is +200 core +600 mem volt 1.10
I got a 24.7 fps
Score 621
On unigine heaven high setting
Low settings was 65.5
Score 1650
Maxed out at 111.0
For me, the best settings was 225 and 400. I averaged around 110-90 fps on overwatch with everything set to low but render at 85%
Thats a good quality core you gotthen!
thanks for the advice subbed cause you deserve it
If i overclock this graphic card then how much watts power supply will need.because i have 210 watts power supply can it work?
try it
I've got the Asus Silent (passive) GDDR5 2gb one, "superposition" started at 2487 score( min 15.2, Avg 18.61, Max 23.77 fps) , when I'd done I was at 2963 score (min 17.92, Avg 22.17, Max 28.3fps).... I maxed out at 260+ and 1000+ on MSI Afterburner, and tried GPU Tweaks but I don't like the UI, and want to be assured that if I crash it it won't reboot into the same settings that caused the crash...Aorus Engine let me set it at 260+ and 2000+ !!!! I tried it at that setting on Wahoo RGT (closest I'll get to gaming) and for the same other parameters my FPS in Medium went from average of 40 to 54fps!!!....One downside though to these passive cards is the heat. With no OC my card hits the 83c limit/cut off fairly easily, If I whip the side off the tower and put my desktop fan pointed at it on the lowest setting that drops to 56 even with 260/2000 OC !!! Some engineering and HVACS skills needed (This is my "backup" PC for films/music/browsing, so not critical to using RGT unless the other one dies on me with but with a GTX 1050Ti it needs no OC for my needs!).... so the cooling must be determining the performance in a huge way?!
GT 1030 in my opinion it's a good gaming graphics card, it's not the best but it's also not greatest ,like i'm playing rust on decent settings 1080p, with 35 and sometimes 40 fps, it may not be a lot of FPS, but for those who are used to play games over years with only 30-35-40 or 50 fps, it's still playable.
To say it lass, GT 1030 in 2023 it's still a good GPU.
Hey great video but I am confused as I do the same settings as you for the overclock but I am getting a constant black screen then crash
I have the DDR4 version. What would you recommend for the overclock? Thanks 👍
With a DDR4 card I would recommend being very gentle on the memory overclock. Those example overclocks were I believe all from GDDR5 cards. 👍
my overclock settings are +240 on core and +600 on memory.
I have a zotac one. Never had issues till now. :D
I have zotac too this settings will help
for the graphic temp
@@RahimullahRahimi-pu3uv I pushed more to +200 +800
Core clock didn't seem to do anything. Memory clock helps
I pushed memory clock 685 when i start the game it crush. You have no problam wit your setting it means 600 memory clock is stable?
@@RahimullahRahimi-td9zd push it to 800 and keep core clock low.. like 200 or 180
great video, thanks for the info. earned a sub
Glad you enjoyed it, thank you for watching!
Thanks for watching! If you enjoyed this video, please LIKE and SUBSCRIBE to show your support!
Thank you this really helped!! ✌
Glad you enjoyed it, thanks for watching! 👍
Thanks you! You made my pc alot better!!!!!!!!!!!!!!
Would setting this card to these clocks and setting the resolution to 1440x900p or 1600x900p improve frames and performance higher with the clock boost?
Who has Gigabyte GT 1030 Silent (GV-N1030SL-2GL) is lucky, you can insanely OC the card but you need to add a cooler.
With Aorus Engine, go to PROFESSIONAL MODE and:
1. GO up to 1690 MHz for GPU 2. GO up to 7498 MHz for Memory
Extremely Stable at least in CS GO, over 160 FPS on any map @ Medium texture and High Shader, runs at 65-70 Celsius (cooler mandatory)
the GT 1050 may be better, but i love this way more
Can GDDR4 GT1030 be overclocked and is it worth it? (2024)
Ddr4 will never be worth it
It can but unless you got it from a gift its terrible a choise but to be fair the normal 1030 is trash as well
did the first one and my screen started flashing green like a seizure light then i full shut off my pc restarted it and it was fine and the msi afterburner setting was back to 0
MY PC KEEPS DOING THAT
i will try to overclock my gt1030, just asking how to change voltage with decimal like 1.10v mine is on percentage thank you in advance
For percentage, try using +10% for 1.10 👍
for me it didn't work is showed a flickering colorful screen, can you help me?
+142 Cores +246 Memory is Safe OC?
ASUS Silent GT 1030
i have GT 1030 4GB DDR4 LP BY MSI. WHAT SETTINGS FOR IT? PLEASE TELL
130 mhz on memory and on clock put somewhere in bettewen 100-200
@@Jolfm123 thanks for the quick reply hehe
Np
🌍🌎🌏GRAPHICS CARD GIVEAWAY! -- CLOSED
-We are running a giveaway for 4x NVIDIA GEFORCE GTX 1050 GRAPHICS CARDS!
-This is a Worldwide Giveaway (Void where prohibited).
-Giveaway runs until 13 August 2022, 12am UTC (+0)
-Check out this video for more details: ruclips.net/video/tYXGPVmDsHU/видео.html
Excellent
bro can you tell i applied the settings but it turned glitchy screen
Sounds like you may have set the settings too high. Try something really low and work up from there. 👍
@@XLSTech yeah i set it like more -30 i putted before and now its ok
Best overclock is Core+125 Memory +500 nothing more than that but it depends of your card's type
Mine is the silent version one
@@VisionXUpdatessilent version is the best. You only need one 12mm fan glued below passive GT 1030 👍
I have low profile gt 1030...what settings should I use?
@@abdullahadnan9424same
What about the pny gddr5 2gb?
great video
I have a palit gt 1030 and settled at +210 core clock/+800 memory clock anything higher is starting to get a little bit unstable.
I use the same card bro! Do you know the best stable overclock for this card?
@@jeffery9272 For me stable is what i typed already - 210 core clock and 800 memory. You can start lower and test it in the game or software nothing to worry about. Even if it would be unstable it will reset to default.
why i got 3 fps on 3dmark with +170 +620 and 2 on stock
I can’t get it to work could it be the game I’m trying to run it Spider-Man Miles Morales and it is nit going good even at the lowest oc setting
Geekbench GPU score?
Is it even possible to change the GPU voltage? my 1030 doesn't seem to get out of 1.0750mv, even going up 10%mv on the MSI
no it's locked, and you'd need to solder on board afaik to enable it on these video cards. But it is no ptoblem, believe me. You wouldn't gain much performance by increasing voltage but would gain the very real possibility of frying your card.
I unfortunately have the DDR4 version. It runs 3dMark around 4 fps.😬
I tried to overclock my DDR4 using the settings I found others using in the comments, but no luck so far. It's crashed like 7 times so far and when it doesn't crash, my nighttime color filter crashes. Starting to think it might not happen
did u overclock it?
No, I eventually gave up cause I was afraid I would damage it or something else in my computer. I can't miss out on performance I've never experienced.
@@RosyKitteh ye the mem clock doesnt go up 120+ if u go up 120 the graphics card crashes( only the ddr4 version sadly)
my oc crashed when i overclocked it to 620😢 i’m a lil worried
I use an SDDR4 gt 1030 from Galax, though not the best I am wondering if I set my core clocks to 220 and memory clock to 110, since for some odd reason, my memory clock can't go high in oc'ing get my core clocks can
That does sound somewhat low for a memory overclock, but that core clock improvement is not bad at all.
@@XLSTech although I can go to 240 to the core clocks, my most gpu intensive game (genshin Impact) freezes and I don't like that I often use that game as my GPU benchmarker, but I still find it very odd that my memory clock cannot go higher than 110 (if I go 120+ my pc will act up but it won't crash)
Maybe I can up the voltage a bit?
@@gdmya inténtalo pero no lo subas más de 1
Dose this boost preformance in games?
Yes. In many cases overclocking can help games run smoother and/or with better graphical detail. Exactly how much all depends on the game, graphics card, and level of overclock.
@@XLSTech what about updating the drivers?
Most of the time using the newest released drivers is recommended.
my asus gt 1030 gddr5 did its best to boost performance on +170MHz core clock and +600MHz mem clock. It doesn't have any fans so the temps raised on 70*C stable.
it was stable 70 because at tgat threshold (70) it starts throttling to prtotect the circuitry. It isn't a problem though, passive cards vahe a great thermal mass, so throttling is usually very mild, like if you play a game 60 fps, it would maybe drop like 5 only.
i have the inno3d gt1030 2gb gddr5 model but when i overclocked it i started to see some really strange things like when i opened gta 5 i started to see some white dots and when i press the escape key it starts to show white squares what should i do
Sounds like the overclock is set too aggressive. Dial back the settings a bit and see if the artifacts go away.
So i apply one of your settings, and now my pc keeps crashing. How do I fix it
Update : so i quickly uninstalled msi afterburner while my pc is stable and now i think it's fine. Definitely not gonna play with this overclocking stuff again
you should never allow msi to start when you open your PC in case something like this happens. If you mess up the overclock you just restart the PC and it should work since msi is not opened yet
how do i raise the voltage to 1.10 like in the video it will only let me raise it by whole numbers
Try raising by 10% for 1.10 👍
My Asus silent Gt1030 memory +685 , core +250😎
it’s compatible on my gt 1030 4gb ddr4 biostar?
The fact someone buy this trash crad from unknown market and ddr 4 version is beyond me
I recommen to throw it in the trash as fast as possible
HELLO BRO...PLZZ REPLY ME ON THIS ONE..I HAVE SAME NVIDIA GT 1030 AND AMD A10 7800..I FOLLOWED THESE STEPS BUT MY SCREEN BECOMES COLORFUL WITH A LOUD BUZZ SOUND...SO PLZZ GIVE ME A SOLID SOLLUTION🙏
It sounds like your overclock settings are too high. Try dialing back both the core and memory clock values until your machine is working again. 👍
@@XLSTechthanks bro 😀
Thanks
my montior turns rainbow is that normal?
Hmm
I think your gt 1030 can run on 200 core clock and 600 memory clock
Will it work on a GT 1030 LP?
did it work?
Will this work on the gddr5 one?
Yes this will work with a GT 1030 that has GDDR5 memory. The example card in the video uses GDDR5. 👍
Hello, I set the core clock to +200 and the memory clock to +700(and it works fine) without changing the voltage setting, is it safe? Thanks
Should be okish... id segest turning it up though.
@@rarebrockstark6219 Okay, but is it still safe if I dont change the voltage setting?
@@rarebrockstark6219 Also Thanks for the answer
@@unfunnyman76 i would say its safe till +270 +800, if you put it at that put the fan speed at max all the time
@@rarebrockstark6219 Ooh okay I already set the fan to max if the temperature reaches it's max, Thank you very much Sir
Edit:reach to reaches
Guys ! Sometimes the save button enables a button which messes up your pc . Just write the numbers down and set them when you turn your pc on
My laptop boot broke because of this
You can also bypass MSI Afterburner from applying overlocks as it loads, by holding down the CTRL key as it starts up.
the program put 100 in voltage not 1.10 how can i put 1.10 volts?
Try putting in +10 for a 10 percent increase using MSI Afterburner
And how much fps in warzone and god of war btw does a 144hz monitor improves fps?
Bro even whit +100 core and +100 memory clock i still crash what is happening?!
Sorry to hear that. I wonder if your core is having trouble with the +100. Perhaps try just the memclock first and see how that goes.
@@XLSTech dont know what happend but when i put +100 core and +200 memeory its work for some weird reason, my gpu is weird
I tried 240 core and 500+ memory, the screen went crazy.
Too bad my fan melted off my gigabyte card💀
can anyone help me
i dont understand voltage part
how can i do 1.10 or 1.05
Is your software looking for a percentage increase? In that case 1.10 would be 10% and 1.05 would be 5%.
@@XLSTech thx
Ddr4 or Ddr5 ?
none works for me it the monitor breaks or idk
It said you can’t download it!
its not raising my frames at all
wow u have gddr5 , i have ddr4 version
how to set voltage to 1.10 pls help
If you are looking at a percentage setting, that would be +10%
@@XLSTech yea my pc crashed im waiting right now on "welcome"
@@XLSTech iit crashed the whole pc with +200 +600 1.10 settings and i want to get it back to +185 +400 but when i reintal the aplication it just crash again like i never deleted it
How can i fix this ?!?
Try deleting afterburner immediately after starting up your pc and reinstall it
I gain 10 percent of fps thanks
That's a solid improvement, thanks for watching! 👍
be carful using upper than 100 settings your windose may crash
Gigabyte GT 1030 GDDR5
My current settings:
Core: +208
Mem: +1000
Power: 100
Voltage: Default
Fan: Auto
Mem at 1000 would actually decrease performance instead of helping
Turned the GT 1030 into GTX 4090
it crashed jesus
ii was so scared lol
i got one for 65 bucks
Bro I did ur settings and my screen started glitching up 😭
You may want to try using lower settings if you are encountering graphical glitches after overclocking
tone them down
For me 170 and 620 is best tx
My gt 1030 run 175 core clock and 769 Memory clokc on Fortnite and 175 core clock and 997 Memory clock on rainbow six siege
Nice overclock on that.
I got mines on 170 and 1000 with undervolt, better performance no temp rise 😜
@@XLSTech it’s a myth now😅
Trust me spend a 70 more bucks and get a gtx 1050ti. Little more performance and you can actually use nvidia shadow play
Pls gave the buy link of that gpu
The GPU being tested in this video is the Gigabyte GeForce GT 1030 Low Profile 2G: amzn.to/3Cjkbme
who can help me i want over clock my gpu this is my gpu Quadro P600 who can help or give me CORE or MEMORY pls
Best overclocking review and explanation 🫶
There like enoght of small cards with low tdp that better then 1030, like 1650 there is gtx 1650, or tons of used AMD WX PRO cards
Lmao mine crashed when I put it at 100% voltage
HERE IS THE MOST EXTREME MOST SAFE OVERCLOCK!!
I have successfully gotten the memory clock on the GT 1030 to be about 4000Mhz (Basically the maximum that MSI afterburner will let you do it).
If you want advice, listen to me because I am an expert at it:
・Backstory: I need the most ultimate GT 1030, despite me not being a gamer and doing programmimg which doesn't need a gpu
・What you can do to improve performance:
»»» 1. Slide the voltage to the maximum since it allowed the higher voltages to kick-in earlier and this means that if you will go to my crazy limits of 4Ghz, you have to slide it, it will NOT harm your GPU, it will help it to be more stable and hit 4000Mhz.
»»» 2. Core clock should NEVER exceed +220Mhz. My GPU crashed after like 250, keep it stable at 220.
・TIPS:
1. Set fan speeds higher for better cooling, keep below 65°C if possible to not thermal throttle the GPU.
2. If you decide to try out my overclock, slowly put it to the max, do NOT put it all of a sudden, slow increases to avoid temporary screen glitches.
3. Close all software like: Discord(or set it to not use GPU hardware acceleration), RUclips, Edge or Google, check Task Manager and look at Dedicated Video Ram usage, close everything.
4. Go to Nvidia panel and set everything to performance (It will not change visual quality and get you an extra 2 - 3 fps which matter a lot in making everything smooth and rendering).
IF YOU LISTEN TO ME, NOTHING BAD WILL HAPPEN, THE WORST YOU WILL HAVE TO DO IS RESTART YOUR PC. THE RESULTS WILL NOT DISSAPOINT
ρɾσɱσʂɱ 😝
😉
My mounting bracket was too big for my rig so I took it off, ik I should be careful with the gpu sagging but it don't weigh much for me to worry to much