I like the background advertisements for the other channels, from the strategic placements of the stickers and not just plastered on a wall or toolbox in one spot. You have some good people backing you up.
Sooooo close to that 200,000 subscribers Justin. Congratulations, you earned every single one of them with your hard work, determination, ambition, and honesty. Thanks so much for everything that you do.
I have never seen grinding wheels worn down so low. Nice restoration. Thanks for sharing this. I did the same to a recent Craigslist buy of a Baldor. Blue?.....if you must. Red is the way to go.
Nice to see that older items are not tossed. I love it when an item looks like it was blown up rolled over by a tank and tossed in the garbage is revived and brought back to life. Can't do that very often with the newer style built for a month stuff. ( Can you tell I am old school???) Keep em coming and thanks for sharing. Well worth loosing 17 minutes of my day over.
Yeah, works great. Looks like an antique but some guy up north makes them in his basement with a plasma cutter and a file. I sure wish they came in a smaller size. That would be handy.
I picked up a great vintage Baldor 6" bench grinder in 2018 at a flea market. It was $35. All it needed was the cord replaced. It's an absolute beast and I couldn't be happier with my purchase. I'm surprised I hadn't heard of Baldor before I purchased the grinder.
Shocking how silent and smooth the Baldors are. If I'm wearing ear protection, which I almost always am, I got to make sure and pay attention to remember it's on. Beautiful build
I've not watched one of your videos for a few months, and I have to say, your format has changed slightly - for the better! It's more concise and to the point, no time is wasted. Keep up the good work!
Nice! Baldor grinders are great. A couple notes: when drilling, use a cooling agent, WD40 works. Makes the drill stay sharp longer. When tapping, two drops of oil on the tap when starting gives a better thread cut. :-)
You are very welcome I love you videos and the content I personally work on small engines I picked up What I believe is a 1950s chainsaw that has not run since 1970 I am hoping to try and get it running hahaha@@TheGoodoftheLand
You should seriously consider doing a RUclips collaboration with Alec Steele. Take a quick trip to Montana and introduce him to Norton abrasives. I noticed in one of your older videos you using a Fireball Tools mega square, designed, made, and sold by Jason - who assisted Alec in setting up his new shop in Montana. I love collaborations and I'm sure in Alec's future projects he's gonna go through a ton of abrasives.
I’m a fan of old machines as well. I had to keep wiping the drool off my face during this video. Swing by my channel sometime and take a look at some of the old gems I’ve found and got running again
Really respect the craft of what you do !! Breathing life into old machines is quite the job but totally worth it to save them from the junk heap. God bless you in your endeavors
Wow! Love the blue paint and you are a master with the can. Been lookin for a grinder like that for a while now. Rare deal and you made it great again.
Love watching your videos Justin. It's so cool to see things restored instead of replaced. My children are looking forward to visiting the old mill pond museum in March. Hope to see you there. God bless.
+J.Denton Leavenworth Thanks J! We were very picky about sponsorships. Had to be the best possible product line. I will let you know when I find a CRC product that isn't top notch. I have been working with the Smart washer and showing it off to visitors at the museum. This thing is a game changer. Removes grease rust and paint! It's a game changer. Thanks for watching! I should have the smart washer video out soon.
I really like the shade of blue that you wrapped it in. I've got grandad's bench grinder and will never part with it. Hopefully it'll get passed down to either my nephew or my nieces.
I have to admit you are damn good at what you do! I can image the city of Lindale wont ever let you go! Great video Justin. Wish you would do a live stream and catch us all up. Hope all is well.
Nice job man! I just picked up a 7307 off CL for $100. It runs awesome. I was thinking of doing a resto .You have inspired me to to go ahead with it now.
When I saw the title that you were restoring a Baldor grinder, I got real excited. Then I found it wasn't very old. I have an old one and wanted to see how it was put together without having to take mine apart. P.S. I always enjoy watching people tap holes with a one handled tap wrench. I just wait until the break a tap in a hole due to the side ways force on the tap.
+CPUDOCTHE1 To make it worse that tap is super dull. A new tap set is on my short list of new tools. Good ones ar very expensive. As for your old Baldor grinder, just get out and start the project. Take lots of photos for reference. You are going to love it when its finished.
![Gunna - HIM ALL ALONG [Official Video]](http://i.ytimg.com/vi/w7Wf0h1Q8a4/mqdefault.jpg)
I like the background advertisements for the other channels, from the strategic placements of the stickers and not just plastered on a wall or toolbox in one spot. You have some good people backing you up.
+Frank Deegan Thanks! Every one of those guys were at The fest in November and Tagged the shop. It was an honor.
Dang, that thing is built! A possum? New shop mascot! XD All these old machine tools aren't dead, they're just playing possum! Nice clean restoration!
just love the rain sound combined with the restoration video, just calmes the soul
+Sebastian Anderssen SCSWS!
Love the sound of the rain in the background. What a cool way to spend a rainy day!!!
A restoration video inside a restoration , inside of a riddle wrapped in an enigma, with a opossum friggin great channel
The grinders previous owner certainly got the value out of those wheels.
The restore came out great Justin. 👍🏻👍🏻👍🏻
Maybe they thought it's a disposable?? Use up the wheels and the whole thing is done with...I've never seen wheels with that much material missing
The blue is better than the green everyone else uses!! Looks great
Sooooo close to that 200,000 subscribers Justin. Congratulations, you earned every single one of them with your hard work, determination, ambition, and honesty. Thanks so much for everything that you do.
I have never seen grinding wheels worn down so low. Nice restoration. Thanks for sharing this. I did the same to a recent Craigslist buy of a Baldor. Blue?.....if you must. Red is the way to go.
Nice to see that older items are not tossed. I love it when an item looks like it was blown up rolled over by a tank and tossed in the garbage is revived and brought back to life. Can't do that very often with the newer style built for a month stuff. ( Can you tell I am old school???) Keep em coming and thanks for sharing. Well worth loosing 17 minutes of my day over.
Beautiful restoration of an bench grinder
The possum thing was awesome. Lol. Never seen that before. Thx!
First time I have seen anyone pimp a bench grinder. Nice work.
BIG Thumbs UP... Excellent restoration. Thanks for sharing it with us.
the rain on the tin roof reminds me of my childhood in the outback of Australia.
OH GREAT NOW YOU GOT A RACING GRINDER . LOVE THAT BLUE.
Yo, cool wrench clamp.
Ha I saw that. Nice to see everyone doing things together and supporting each other!
Yeah, works great. Looks like an antique but some guy up north makes them in his basement with a plasma cutter and a file. I sure wish they came in a smaller size. That would be handy.
Hahaha the old Norton wheel making a cameo. That grinder is Purdy
I picked up a great vintage Baldor 6" bench grinder in 2018 at a flea market. It was $35. All it needed was the cord replaced. It's an absolute beast and I couldn't be happier with my purchase. I'm surprised I hadn't heard of Baldor before I purchased the grinder.
Extra content is so great ! ! ! ! ! ! ! !the animal is so cute.God bless you.
Baldor makes such nice stuff...and you made it even better.
It just beautiful seeing a beast of a tool restored to it's former glory. You are the master.
Rainy day restoration... Problem is I'm getting sleepy with the soothing rain sounds
+Brion Hall I was trying not to fall asleep myself.
Handyman ASMR I dig it 😁
Shocking how silent and smooth the Baldors are. If I'm wearing ear protection, which I almost always am, I got to make sure and pay attention to remember it's on. Beautiful build
I've not watched one of your videos for a few months, and I have to say, your format has changed slightly - for the better! It's more concise and to the point, no time is wasted.
Keep up the good work!
awesome job! Maybe you should go show Mechanic Steve and Chucke how its supposed to be done!
That color is phenomenal. And another amazing resto.
Great repair and part restoration and lovely colour
Nice! Baldor grinders are great.
A couple notes: when drilling, use a cooling agent, WD40 works.
Makes the drill stay sharp longer.
When tapping, two drops of oil on the tap when starting gives a better thread cut.
:-)
Rockin that blue candy...
I’ve had a lot of grinders but the Baldor Is by far the best great job
That’s the best possum footage I’ve ever seen 🤣👍👍👍👍👍
+SHAWN HAGEN Possomly the best I have ever seen😂
Your videos are so inspiring I love how you take forgotten things and bring them back to better than new and be able to use them for years again!!!
+jmptaz Thanks!
You are very welcome I love you videos and the content I personally work on small engines I picked up What I believe is a 1950s chainsaw that has not run since 1970 I am hoping to try and get it running hahaha@@TheGoodoftheLand
+jmptaz Sweet! I just restored my first chainsaw. You are going to have a blast.
Sweet color. Just found a ,10" with lights and pedestal base. Your work is inspiring. Beats any other grinder.
Baldor Grinder, top of the line, excellent job. 👍
You should seriously consider doing a RUclips collaboration with Alec Steele. Take a quick trip to Montana and introduce him to Norton abrasives. I noticed in one of your older videos you using a Fireball Tools mega square, designed, made, and sold by Jason - who assisted Alec in setting up his new shop in Montana. I love collaborations and I'm sure in Alec's future projects he's gonna go through a ton of abrasives.
Great video!!The possum footage was awesome 😁
Another very beautiful restoration, I just love it. Thank you for sharing your amazing story. God bless you and your family
I’m a fan of old machines as well. I had to keep wiping the drool off my face during this video. Swing by my channel sometime and take a look at some of the old gems I’ve found and got running again
love the blue color justin!! great video!
Nice restoration. I love that each wheel has its own light. I've never seen that before. Nice job.
+Terrible Adelaide Drivers I love that Norton uses this grinder as the logo for its grinding wheels! Very cool.
I love the blue paintshop. :-)
That looks absolutely superb. What a well made machine. Job well done.
Very nice bench grinder well done as per normal.
aS USUAL YOU AND YOUR PROJECTS ARE AWESOME. Great show !!
Really respect the craft of what you do !! Breathing life into old machines is quite the job but totally worth it to save them from the junk heap. God bless you in your endeavors
+Christ Centered Ironworks Thanks Brother! Really appreciate all you do for us noob blacksmiths. I have learned a lot from your video. God bless!
@@TheGoodoftheLand Awesome so glad you have enjoyed the videos I'm just glad to serve the community :-) hope you have a great January!
@@ChristCenteredIronworks its going to be a great year!
+Christ Centered Ironworks We need to have you at the fest in November.
@@TheGoodoftheLand I would love that gives me a good excuse to see some of the wife's family while there :-)
Totally wicked on the paint job!
The opossum was cool. I had one in my garage a few months ago. He was in the trash can eating old bread. Kind of natures trash clean up crew.
that and they eat ticks like crazy
Love the blue! Nice work!
The blue looks awesome!
Wow! Love the blue paint and you are a master with the can. Been lookin for a grinder like that for a while now. Rare deal and you made it great again.
I love the color of the grinder
Scratching at the heels of 200K Subs! Awesome to see the channel doing so well Justin! That Baldor though!! Pure shop Jewelry! Zip~
You had me when you started using the old power Hacksaw
+beepbeepcoyote I love that saw!
Love watching your videos Justin. It's so cool to see things restored instead of replaced. My children are looking forward to visiting the old mill pond museum in March. Hope to see you there. God bless.
I'm there on Saturdays. Make sure you send me an email.
@@TheGoodoftheLand will do. Thanks.
One word... Epic!
That color is great.
Great job, it looks awesome in blue
That’s a beautiful bench grinder. Would love to find something like this for my shop 😊
Love the blue colour.
It must always rain in Texas. I think every video has rain in the background. Nice work by the way, keep it up.
+jeffery biddix we have had 120 inches I believe. It's been crazy.
Nice work, Justin. That is a wonderful restoration, which you will enjoy for many years.
+Herb Blair Thanks Herb!
Looking good. Another great video.
Man please keep the rain in Texas---North Louisiana cant take it any more. nice restoration job.
+Rodney Wroten We were at the family house in LA over Christmas and it was wet!
Nice grinder and some nice new stones! The Johnson saw was my favorite. :-)
Fantastic job on the grinder! Loved using one just like it on the job. One of the best in my opinion.
Love the blue
Watching your vids today inspired me to go work on one of my old generators
Nice Restauration ... good Job 👍🏽💪🏽
Now thats a sexy grinder! The machine ain't bad also! Do that rusted out bandsaw next
That blue looks amazing on that grinder
Great job on the resto, really liked the product placement, think I caught ‘em all.
+J.Denton Leavenworth Thanks J! We were very picky about sponsorships. Had to be the best possible product line. I will let you know when I find a CRC product that isn't top notch. I have been working with the Smart washer and showing it off to visitors at the museum. This thing is a game changer. Removes grease rust and paint! It's a game changer. Thanks for watching! I should have the smart washer video out soon.
Love these kind of restoration videos. Have an awesome Sunday, Andreas from Off Grid Sweden 🇸🇪
nice work Justin looks like everything is going great! Keep it up
Someone got their moneys worth out of that Norton stone! Very nice grinder
You and your work are awesome
But....I like hammered gray-blue-ish shop tools!! LOL Nice job, Justin! :-)
+Norm Jacques Same here, it was just not giving the correct effect. It just looked dirty.
Aside from the really good restoration, must say, video editing skills are sweet!
Very good restoration bro 👍👍👍👍👏👏👏
Beautiful restoration
The blue is a bit bold for my taste, but you do such an amazing job at painting you make any color look great.
I really like the shade of blue that you wrapped it in. I've got grandad's bench grinder and will never part with it. Hopefully it'll get passed down to either my nephew or my nieces.
I have to admit you are damn good at what you do! I can image the city of Lindale wont ever let you go! Great video Justin. Wish you would do a live stream and catch us all up. Hope all is well.
Nice grinder it has a light bulb for each grinding wheel that is awesome
Your videos are still just as fun to watch as the very first one. Keep up the positive attitude.
Love the show man! The work you all do is great!
Dude, you carry an Opinel knife? Nice! lol I love the color.. That thing came out great.
Send that possum back to congress.
Nice job man! I just picked up a 7307 off CL for $100. It runs awesome. I was thinking of doing a resto .You have inspired me to to go ahead with it now.
Looks beautiful. I would love to have a used grinder like that.
excellent work ...much respect from Mauritius
When I saw the title that you were restoring a Baldor grinder, I got real excited. Then I found it wasn't very old. I have an old one and wanted to see how it was put together without having to take mine apart. P.S. I always enjoy watching people tap holes with a one handled tap wrench. I just wait until the break a tap in a hole due to the side ways force on the tap.
+CPUDOCTHE1 To make it worse that tap is super dull. A new tap set is on my short list of new tools. Good ones ar very expensive. As for your old Baldor grinder, just get out and start the project. Take lots of photos for reference. You are going to love it when its finished.
Sweet restoration.
Nice job as usual!
Sweet.love the color....
Nice old grinder with some old Norton sanding disks
Nice job there young man!!!
Razor!
Nice repair! Congrats on 200 K subs! Best wishes!
Awesome work sir!