Z1 Rear Diff Bushing Install | Nissan 350z / G35
HTML-код
- Опубликовано: 27 мар 2023
- 350z Rear Diff bushing installation. This is a worth-while upgrade as most of you probably have a failed stock diff bushing at this point. It can be a bit of a tough project, but it is actually quite doable with a little bit of patience and some hand tools.
Z1 Bushing Set: www.z1motorsports.com/z1-prod...
SuperClean Products: superclean.com
Tackle this project at your own risk and use this video only as a guide as I am not a professional and cannot be responsible for any damage or injuries that you may incur while attempting this on your own. This is NOT a "how to," it is simply how I was able to accomplish the task!
Links provided are affiliate links and purchasing through them may result in this channel earning a small commission, at no additional cost to you. These links may include the Amazon Affiliate and eBay Partner Network.
If you're interested in supporting the channel, please consider checking out my RUclips Store linked below as well as shopping some of my favorite products on Amazon!
My Favorite Things: www.amazon.com/shop/speedcult...
Speed Merch: / speedculturestudios
SCS Catback Details: • SCS Custom Exhaust EVE...
SCS Single Exit: • SCS SINGLE EXIT 3" Exh...
Traction Concepts LSD Kit: www.tractionconcepts.com/Infi...
BBK Upgrade for CHEAP: • Amazon BIG BRAKE Upgra... or • TOTAL cost for Q50 Big...
Corbeau Seats: bit.ly/3OS3nXw
Cosmis Racing Wheels: cosmisusa.com/collections/all...
Lug Nuts: amzn.to/3Mnb6u2
Q50 Wheels -- Forgestar F14 from @motorsports_LA motorsportsla.com/
Video Equipment:
Video Equipment:
GoPro Hero 10: amzn.to/3XC8rmz
GoPro 10 Media Mod: amzn.to/3jTI0tJ
Sony HX80: amzn.to/3EVj6iX
DJI Air 2 Drone: amzn.to/3GyE2OK 
Авто/Мото
I realy like the gloss black. Alot! And the diff cover is fire bro. So nice and clean looking under there. Bettn you will have zero deflection. Then the decal! Awsome.!
Thanks! Love how it turned out
Good video. Love that super clean👍
No kidding on that bushing! What a pain. I had to use an air hammer with a sharp chisel to cut the outside ring out. I was covered in black oil😂
I was struggling using the removal tool wrong😂😂
I like the new hardware for your stub axle to axle. Smooth install!
I did the 370z axle conversion awhile back so got all fresh hardware.
@@SpeedCultureStudios I love new hardware
@@SpeedCultureStudiosI've never heard of this, I'll have to take a look!
@@willhawkins284 me too!
@@BB-pf2cs good upgrade for durability, but also 370z hubs are easier to change out so keeps maintenance easier and cheaper in the long run!
thank you for this, need to get a jack and some stands and im gonna do this soon
Makes a big difference
@@SpeedCultureStudios i just got the kit from z1, been trying to figure out if i wanted to get them installed by a shop or do it myself, i got quoted 1200 so im definitely doing them myself lmaooo; mine need to be changed so bad, and this video gave me the motivation to do it myself. thank you man.
Thank you for this vid I’m a order the tool obviously it’s very easy with the right tool nice ride btw
Great work bro.....!!
Thanks for checking it out!
My intake is ziptied as well😂 nice ride man!
Gotta keep it still 😂
Dope tool
Let's see that footage!
Video live on Thursday at 5:00pm eastern!
Beautiful car 👏 👍
For the big, rear bushing, do you remember if you got it completely in and flush with the subframe, or did you have that protrusion of the bushing sticking out that meets with the diff? Hopefully that makes sense
It is pretty flush on the rear-facing toward the back of the car. There is a slight protrusion on the forward side of the subframe that meets the diff itself.
Thank you, that's just about how I got it.
How’s your luck been with that Daytona jack?
I’m seriously considering getting the low profile version.
For the price, it’s hard to beat! Really low profile so it’s nice. Lifts smooth and holds strong.
Do you have to grease the polyurethane subframe and differential bushings before install?
On the top front diff bushings did you used any of the old hardware? I know the bushings come with metal for the bottom but I’m not sure if I have to use the old ones on top
Tops are discarded
@@SpeedCultureStudios thank you 🙏🏽
My mechanic installed my rear z1 poly diff bushing but it pokes out towards the rear of car by about 3-4mm, not flat to the surface of the frame. Is this going to be an issue? Thx
Is the z1 subframe tool worth it ? Cause I’m about to change my diff to an lsd and scared to do that one bushing
Absolutely worth it!
I like your Z
Thanks!
Hey is this what they say you need to drop the sub-frame for? Or are those other bushings? I’m looking to replace mine but I’m unsure whether to do it myself or get it done at a shop to avoid high labor costs
No need to drop the subframe for this. That would be for the subframe bushing collars. I have a video on that too. And you don’t have to “drop” it. You just have to lower it slightly.
@@SpeedCultureStudios awesome thank you 🤝
Where you get that intake heat shield?
I made it
ILL SHOW YOU WHY DIFF CARRIER BUSHING SOLID MOUNTS ARE GOOD
I’ll show you why poly are better
Did you find out what the ticking noise was?
The ticking noise?
Yeah you pushed the car in the beginning of the video. You said it might be the sway bar end links or upper control arm. I was wondering which one it was
@@samuelgrosvenor6611 yeah 95% sure it’s the ball joints in the control arms now that sway bar bushings were changed
@@SpeedCultureStudios I’m sorry to bother you. But the single ball joint that needs to be pressed in. Or a bushing in the control arm
@@samuelgrosvenor6611 I have adjustable control arms. The ball joints are in rough shape. The whole arms are being upgraded soon
I’m struggling rn no tool lmao
It’s a bitch!
Same lol
@@slowdownx3919 I used a air hammer worked perfectly !