dude with the recovery truck is lucky he didn't get injured or killed. Guy who got that thing stuck should have had to shovel all the mud out from in front of it.
Easy, just run it into a muddy area with thin roots or low hanging branches and it'll be stuck pretty quickly. The thinner roots are like wire just made for getting stuck in the drums and chaindrive in the back, saw some pictures once of one that had almost pulled a tree down on top of itself. A Vityas DT-30 though ... that might take some work. It's fully amphibious and good at headbutting trees. :)
Quad Tracks are notoriously difficult to pull because the tread is angled upwards so the bogey won't tilt forward. Even under power when they have no traction they offer huge resistance and must be literally dragged on their "feet" pushing and dragging tons of muck along the way. One of that size and bulk buried that deep... little choice but to lift it to give tractors a chance.
@Simon Barth i think so, the winch was pulling the plow sideways so the pressure would have been built up on one side, and lessened on the other. So it had to go somewhere...
I would have to say no matter the brand or what you have for a tractor, if you find a sinkhole and your riding weight is heavy, your going to sink no matter what, it just isn't going to be a good day, i have seen even skidders that were meant to be in marshy areas sink to ag lime spreaders go down and get stuck. just physics and murphy's laws.
Nope. I had a 9400T ran it for 5600 hrs. They don't cut it in wet conditions. I had to swallow my words about quadtracks, and buy one. They are far superior.
because it's a nice flexible machine, once you're done you can take the blade off and put a plow at the back of it. Also, it's a bit faster than most dozer, which makes it good at light blade work such as spreading sand or plowing snow - It can do that faster than pretty much any dozer. So there's many different reasons for it ... besides, if you already had a quadtrack, why would you buy a dozer instead of just a blade for the quadtrack ? I'm sure that economics does play a big role.
sometimes it may be hard ground on the top but as you work on it pushing it brings the water to the top .you only have to get stuck a little bit at first and buy the time you have tried to get out it's to late the sucktion has got a hold of you. it's ok all you lot saying how did it happen it can and dose to the best of people
No, not to the best of people. These people are quite far from being the best, in fact if breathing involved any level of thinking, they would all expire immediately.
Or dig a ramp out front of it. They were pushing waaaay too much mud & crud ahead and underneath! Looks like the strain on the blade broke some hydraulic hoses too!
Would have a dual tire tractor gotten better traction? It just seems as if the lugs on the tracks are small and filled. Or metal dozer type tracks? At any rate that's one stuck machine.
The best way to pull that tractor out is to pull it at a sharp angle. It means your not pulling the full weight of the tractor. You would have it out in no time.
just dig the mud out in front of it and in between the tracks and hook strait horse power to the front of it. You guys need bigger chains and cables to deal with this kind of stuff not to deal with small trucks such as semis
The 360 machine driver wasn't much help until late in the recovery. He surely could have cleared a track around the front of the stuck machine instead of being a spectator.
it really hurts to see a new tractor smoke blue like that.. like an old fordson major or an old fergusson... :/ i wonder how they treat their equipment.. i wouldnt like to have those working with my mashines.
If they had hooked up the John Deere to the stuck Case, and then the tow truck to the Deere, they could have used the power of the Deere to help pull, instead of just using it as an anchor for the tow truck.....could have been out in half the time.
I am assuming the idiot was the guy who tried to drive it out after he was already stuck (probably the same guy who got it stuck in first place). We farm a lot of treacherous spots and normally when you get in trouble we try very gently to back out if possible and don't dig it down. One tractor is almost always enough to get you out if you don't go in too far and for Christs sake don't dig it down until you can't see the tractor!
quad track has about 500HP, and weighs 55,000lb. they don't float. We all can learn from this. Chains and winches are dangerous, and the earth puts up quite a fight.
I'm sorry but this guy should know the terrain and the limits of his tractor before diving into all that. It takes some serious shit to get a Case IH stuck, and his mind must be full of some serious shit to try and tackle it. What was he trying to do with that front plough? Shift 50 tonnes of wet mud? serious shit man....serious shit
Hey did u here what one quad trac driver said to the quad trac driver? It wasn't hey I'm stuck maybe we better get a tow truck or I never said u might get hung too! lol listen up your fellows when u get stuck or even u can't move anymore just stop. Stop! The longer u wallow around is the longer ur going to be getting it out. Trust me don't try and be a hero. I've gotten a trackloader stuck 2 times in23 years and 10 of them wasmucking out and filling sediment ponds for builders. And I stopped and we was able to get the 973 out with a small dozer. I learned that when we was trying to fish a excavator out of one.i was young then and all the old kept saying see what happens when up dumb shit. Yeah the guy did it cleaned his stuff out and took off before we got there. We called him aqua man
It is beyond me how you could be dumb enough to get a 400k 600 hp case ih quad track stuck in mud. It is also beyond me why anyone would be stupid enough to drive anything that heavy into a mud pit, quad track or not.
I'm guessing that you have never broken a chain before. Chains aren't nearly as dangerous as cables. You break a chain, one link breaks and the two remaining lengths of chain fall to the ground. I have seen it from the cab of a tractor being pulled out. You break a cable though, shit is about to happen.
I have to wonder why the operator thought it was a wise choice to drive into that particular mud hole... pit...
dude with the recovery truck is lucky he didn't get injured or killed. Guy who got that thing stuck should have had to shovel all the mud out from in front of it.
They said it will go anywhere, but they didn't say it would return.
Whoever drives it into the mud pit shall bear the main responsibility! ……😂😂😂🌚🌚🌚
Easy, just run it into a muddy area with thin roots or low hanging branches and it'll be stuck pretty quickly. The thinner roots are like wire just made for getting stuck in the drums and chaindrive in the back, saw some pictures once of one that had almost pulled a tree down on top of itself.
A Vityas DT-30 though ... that might take some work.
It's fully amphibious and good at headbutting trees. :)
3:30 some oil is poped out from the front hydraulics!
isso simm sao maquinarios soo apaixonado por maquinas desd qando tinha 7 anos ate hj creio qe tenho muitas maquinas pra mim conhecer e opera..
Good job 👍😃
In Germany, we are dreaming of such a machines ;-) Nice Video!
futpc
I haven't laughed that hard in a while.
If you want American Iron then you want a Big Bud.
all that blue smoke coming out makes me think engine was cold at start but yet he revs the shit out of it,poor motor
Quad Tracks are notoriously difficult to pull because the tread is angled upwards so the bogey won't tilt forward. Even under power when they have no traction they offer huge resistance and must be literally dragged on their "feet" pushing and dragging tons of muck along the way. One of that size and bulk buried that deep... little choice but to lift it to give tractors a chance.
@Simon Barth i think so, the winch was pulling the plow sideways so the pressure would have been built up on one side, and lessened on the other. So it had to go somewhere...
The operator owes all that help a beer!
yes he does
620 is super very good in mud
So pulling backwards instead of going forwards was out of the question correct?
At 2:27 and 2:30, is that Hydrolic hoses breaking? (fluid shoots out)
What are you guys pushing with those blades? Looks like something that would be used for snow, or other soft materials.
this may sound stupid but how did you sink a quadtrac in the mud? how did you even do that? did you poot 20.000kg on it or something
What were you guys doing when you got stuck? Is that a spring its stuck in? Canada or USA? Cheers
Blading in a swamp.....hmmm, we don't do that here....
echt geil :D
Running Start????? that is how things get broken
the damage has been done. the operator is gonna be leaving.
1) straps 2} pull on a slight angle 3) a jolt
what a mess. glad you got it out.
wow :0
They whoop John Deeres ass.
Talk about using the complete wrong Fricking tool for the task at hand
The dude who got it stuck should have to wash all the vehicles AND buy at least three rounds of beer
What!?, with these two beasts could turn the worldwide!!
that was a John deer owner walking under that cable for sure
I would have to say no matter the brand or what you have for a tractor, if you find a sinkhole and your riding weight is heavy, your going to sink no matter what, it just isn't going to be a good day, i have seen even skidders that were meant to be in marshy areas sink to ag lime spreaders go down and get stuck. just physics and murphy's laws.
Looks like the Case was spitting out hydraulic fluid at 3:30...
Yep, probably not made to take that kinda pressure from the tow line.
Makes you wonder how much pressure one of those machines can take without tearing it apart
Nope. I had a 9400T ran it for 5600 hrs. They don't cut it in wet conditions. I had to swallow my words about quadtracks, and buy one. They are far superior.
because it's a nice flexible machine, once you're done you can take the blade off and put a plow at the back of it. Also, it's a bit faster than most dozer, which makes it good at light blade work such as spreading sand or plowing snow - It can do that faster than pretty much any dozer.
So there's many different reasons for it ... besides, if you already had a quadtrack, why would you buy a dozer instead of just a blade for the quadtrack ? I'm sure that economics does play a big role.
does the quad only running on 5 cylinders?
sounds BAD
Yeah, a lot of voltage, but no igniting thoughts!
if he got a running start, the tractor would have skipped over the mud, like a snowmobile on water.
Chain snaps. Man immediately walks under other chain and takes a look. This could have been a very different video...
sometimes it may be hard ground on the top but as you work on it pushing it brings the water to the top .you only have to get stuck a little bit at first and buy the time you have tried to get out it's to late the sucktion has got a hold of you. it's ok all you lot saying how did it happen it can and dose to the best of people
No, not to the best of people. These people are quite far from being the best, in fact if breathing involved any level of thinking, they would all expire immediately.
why are quadtracs used with blades on the front like this anyway, is it because they're cheaper then proper bulldozers?
Or dig a ramp out front of it. They were pushing waaaay too much mud & crud ahead and underneath! Looks like the strain on the blade broke some hydraulic hoses too!
I wouldn't want to be the one to have to clean all that mud out of it.
Would have a dual tire tractor gotten better traction? It just seems as if the lugs on the tracks are small and filled. Or metal dozer type tracks? At any rate that's one stuck machine.
that's intense!
That's Case, but I don't understand why he drove in this dirty whole??
The best way to pull that tractor out is to pull it at a sharp angle. It means your not pulling the full weight of the tractor. You would have it out in no time.
This is what happens when people try to recreate '2 girls one cup' with tractors
just dig the mud out in front of it and in between the tracks and hook strait horse power to the front of it. You guys need bigger chains and cables to deal with this kind of stuff not to deal with small trucks such as semis
how can track gfuck up the road if they make less pressure do the ground
Get a QuadTrac they said, It will go anywhere.
yep they won that challenge. the next challenge is to get a fordson snowmotor stuck!
Good
as i allways have said. every farmer need an DOZZER at the farm
Dozeer in that situation , the dozer get stuck , by the timon...and weight , and compataction
Sunken shame ... :-)
If you pulled it back, the blade might have ended up dragging in the mud making it even harder to pull.
How in all holy hell did you get a quadtrac stuck that far down to the bollocks!!
Please explain how anything can be "Light for its weight"
The 360 machine driver wasn't much help until late in the recovery. He surely could have cleared a track around the front of the stuck machine instead of being a spectator.
when it said stuck, I didn't think THAT stuck
Cleaned one before?? Me too
is that hydraulic oil at 3:30 ?
what do people get themselves into??
it really hurts to see a new tractor smoke blue like that.. like an old fordson major or an old fergusson... :/ i wonder how they treat their equipment.. i wouldnt like to have those working with my mashines.
If they had hooked up the John Deere to the stuck Case, and then the tow truck to the Deere, they could have used the power of the Deere to help pull, instead of just using it as an anchor for the tow truck.....could have been out in half the time.
how the hell can you sink a quadrac so deep in the mud!! only with moving and moving and moving in stuckness
Thats definitly stuck haha
:0 my goodness that would suck ass to clean !
Not quite sure why i just spent 5 and a half minutes watching this.......drunken RUclips surfing is quite interesting.......
You drove it in there now you clean up the tractor and fix that damn hole
That tractor weighs ~25 Tons.
if they use the backhoe to take the plow off it would have been easier to get out
nice johndeere
:O
Is not 620 this is 535 307,8 hp in hidraulic timon 620 is 537,9 in hidraulic timon
that is unfortunate.
How is it even possibly to do that with 4 tracks?
Idiots. The right (I guess wrong) idiot can fuck up anything
Yeah its from the rams on the dozer blade!
Ikr? Probley a 400 grand tractor am I right? I do not know cause I do not own neither a case of farm.
fancy parking it there in the first place???
Just put the port-a-potty there and forget that spot
I am assuming the idiot was the guy who tried to drive it out after he was already stuck (probably the same guy who got it stuck in first place). We farm a lot of treacherous spots and normally when you get in trouble we try very gently to back out if possible and don't dig it down. One tractor is almost always enough to get you out if you don't go in too far and for Christs sake don't dig it down until you can't see the tractor!
Hate to be the person who got that stuck!
quad track has about 500HP, and weighs 55,000lb. they don't float. We all can learn from this. Chains and winches are dangerous, and the earth puts up quite a fight.
What the beck is wrong with that engine on the quad!?!?!?
casie wanted to play in the mud hole just let her! lol
I'm sorry but this guy should know the terrain and the limits of his tractor before diving into all that. It takes some serious shit to get a Case IH stuck, and his mind must be full of some serious shit to try and tackle it. What was he trying to do with that front plough? Shift 50 tonnes of wet mud? serious shit man....serious shit
What the hell was he/she doing in that mudhole with a POS Case like that? Hope they were fired.
Lots of rubber but no "conception"
Whoever drives it into the mud pit shall bear the main responsibility! ……😂😂😂🌚🌚
wow
Trzeba mieć talent...
Hey did u here what one quad trac driver said to the quad trac driver? It wasn't hey I'm stuck maybe we better get a tow truck or I never said u might get hung too! lol listen up your fellows when u get stuck or even u can't move anymore just stop. Stop! The longer u wallow around is the longer ur going to be getting it out. Trust me don't try and be a hero. I've gotten a trackloader stuck 2 times in23 years and 10 of them wasmucking out and filling sediment ponds for builders. And I stopped and we was able to get the 973 out with a small dozer. I learned that when we was trying to fish a excavator out of one.i was young then and all the old kept saying see what happens when up dumb shit. Yeah the guy did it cleaned his stuff out and took off before we got there. We called him aqua man
Seems a problem with track vehicles. Once they sink in, they really sink in...............??
The deeres are driving around that toy, just saying..
It is beyond me how you could be dumb enough to get a 400k 600 hp case ih quad track stuck in mud. It is also beyond me why anyone would be stupid enough to drive anything that heavy into a mud pit, quad track or not.
True. You can get anything stuck.
It's hard to imagine, this is really embarrassing😅, this mud pit is too deep......😂😂😂😂😂
It takes skills to get a tracked vehicle stuck
how do u get a quadtrac stuck
I'm guessing that you have never broken a chain before. Chains aren't nearly as dangerous as cables. You break a chain, one link breaks and the two remaining lengths of chain fall to the ground. I have seen it from the cab of a tractor being pulled out. You break a cable though, shit is about to happen.