Garmin Perspective Mode Mount Install
HTML-код
- Опубликовано: 11 окт 2024
- Guys this is Garmin's Perspective Mode Mount Install. This is a easy and quick install. It took longer to update my unit than it took to install this new mount. I hope the video helps to make your install a little quicker. Thanks for watching. The link to Garmin's new mount below.
Garmin NEW Perspective Mode Mount Install - amzn.to/2MbyXQQ
Minn Kota Ultrex Freshwater Bow-Mount Motor with Universal Sonar 2 and i-Pilot GPS (36-Volt, 112-Pound): amzn.to/2todkap
Cash App: $welch333
or
By the chance anybody wanted to support this channel can do so through PayPal: Please use my email address to send donations michael-welch@comcast.net
If you guys like fishing and hunting please check out my other channel The Basshunter: / @thebasshunter
Been looking for a good video for this, Thank you.!!!!
*I bought this model for my 14 ft Jon boat. **enjoyable.fishing** recommend love it!!! It pushes my boat with ease ( 2 men 220 each). I would highly recommend this to anyone.*
Great video I just installed mine yesterday but one thing I would like to share is on the shaft garmin recommends using tape to secure the transducer cable to the trolling motor shaft not zip ties. They say zip ties can damage the cable over time and mess up the livescope. Keep up the great content 👍
Thanks, I did put tape on mine after everyone pointed that out.
Yes tape you do not want too ruin that 21 pin thin wire it's very fragile
Thanks. Putting it on the S makes a big difference. I just installed mine and I had it in the dead center....then I thought in forward mode it looked off center. Thanks for the great video!
Yes, that little mark make a difference. I glad you figured it out.
Nice video with step by step instructions for the install -- thank you sir!
Thanks, just use electric tape instead of zip ties to hold the cables to your trolling motor. That the only thing I changed on mine.
Great Video, I had my shaft mount installed in the center of the S & P.. instead of it positioned to the center of the S, for starboard side.. Hopefully now my screen shots will be a lot better... Thanks Again for a great video..Explained it perfectly !!! Have a Great Fishing season.. Tommy
I'm glad you seen your mistake. I should work a lot better now.
Do not use zip ties ! The cable may be damaged! Use electrical tape ! Thanks for the video !
michael rank I got you. I later changed that and put electrical tape on it. Thank for watching out.👍🏽
Good video
Best install video on RUclips
Thanks
No Zip ties. It's in the manual.
Yo thanks man, just installed using your instructions.
Great video 👍
NO ZIP TIES ! PLEASE REPLACE WITH ELECTRICAL TAPE ! I enjoyed your presentation. Gary
I have already replaced them with electrical tape. Thanks
Great job on the video.
Thanks for the video. Great break down!
Nice job sir ! Very helpful details.
Thank you 🙏
You answered some great questions. Thank you.
Very Nice set up Sir !
Good video. Thank you
Thanks just use some electrical tape instead of zip ties to hold the cables to the trolling motor. I changed that later on my boat.
it is my understanding that Garmin does not recommend zip ties on the Live scope transducer cable, you are suppose to use Electrical tape to prevent breaking the wires. Other than that this is a great video.
Best haw to video on RUclips
Thank You!
My centerline is perpendicular to the trolling motor versus parallel. But i was following the line indention.
Thanks for the video, very informative and easy to follow.
Thanks, just use Electrical tape to lock the cable to the trolling motor. Don’t use zip ties. That is what I learn after making this video.
Very good and informative video !!
Good job thanks for posting the video I will subscribe for further information
great job thanks!
He has it mounted correctly.
good job
Thanks and I did remove the zip ties and replace them with black electrical tape.
@@michaelyoucanfixthat nice,
hope u have a great time on the water.
That's awesome....how do you like it mounted on the trolling motor
I hate the mount. If you fish in or around grass or logs. It will get pushed out of position easily and you have to reposition it. I don’t like the perspective mode. It’s not clear enough to understand what you are looking at. It’s no where clear as 360. I think I’m going back to the regular mount or mounting to the side of the trolling motor.
@@michaelyoucanfixthat awesome.....I just ordered the lvs34 may be it will be a little better......I do love the 360 through.
Question I heard you are not to use zip ties did you have any problems?
No, I did not use the zip ties after everyone start tell me not to use them. So, I put electrical tape on my cables after this video was made.
So have u not ever had any trouble zip tying ur wires?? My buddy had a come apart on me says Garmin won't warranty it if u use zip ties supposed to use tape 🤷
I did change it to tape. Shortly after making the video. Everyone let me know.
Looks like to me the transducer is backwards. The wire should be on the backside, or it is on mine.
The cable is coming out the back. The back is on the same side as the prop. The front it of the transducer is one the side of the front of the trolling motor. Just look at it again.
Thanks! Anyone else have an issue w the center stainless screw backing off and needing continuously retightened after every trip because the rubber washer acts as a friction wrench? If you over tighten to counter this, then you will shorten the life of the plastic notches id think. Anyone?
Thanks for the information.
Use red locktite
Got to the 1 yard line and Fumbled
DO NOT USE KNIFE, DO NOT USE ZIP TIES!! CAN DAMAGE CABLE!! Per Garmin factory instructions.
Question, how high from the trolling motor head did you install?
I have mine about 11” from the motor but I’m going to move it to just about 5” above the trolling motor. Because if I’m fishing shadow and my trolling motor is up high. The transducer is close to coming out the water. I even thought about mounting it on the side of the trolling motor. I look at the pro’s and they have their’s close to the trolling motor.
Круто,
What do you think of perspective mode?
I try it a few time when I first installed mine but it was just not clear and hard to see anything. I just stop trying to use it. They have had about 3 updates sense then but I have not try it in 8 months. But for $99 it’s Worth getting just to have. I’m sure they will figure it out sometime.
but why the fff is that not straight?
I don’t know. I look at that all the time and I think the same thing. Why it has a little bend in it.
Zip ties😳😳😳
I know and I changed over to tape now.
Saw the zip ties and turned off
Thanks! To let you know. I did replace with tape later on.