@@Jeditrunks I love how you came here to hate, literally a whole video showing the whole process, If you can’t follow instructions, simply find someone else to watch instead of being a miserable internet warrior.
How did you ensure that the bottom radiator coolant flange seated and connect properly I tried to place in there a couple times but would seat unless the o ring was removed.. do I just have a bad o ring?
Hey man, great video and very helpful. Any advice on getting that clip all hooked on (around 25:41) it feels like it only goes so far and the clip seems useless since it isn’t going on all the way but I know it should? Anyway thank you for the video used a lot of it
It had cracked after I hit a duck in snowy Missouri backroads. And yeah you might need to check your water pump, hoses, and thermostat to make sure it’s also not leaking from those places.
@@Lu-gm9mx God damn haha! I've checked everything defo the rads leaking as the moisture is on the front bottom of the rad, I can see it through the front of the bumper, if it were the waterpump it'll be coming from the bottom of the sump, not surprised though car is pretty old though the previous owner took good care of it and so do I.
@@Lu-gm9mx Yea its the original rad... Gonna do a refresh on it pal, I already have the coolant flange and thermostat housing so i'm actually glad that the rad started leaking before I install any of those parts
At the end of the video you moved the phone so much so we could not see when you bled the system, Thanks any way, for the most part it was very interesting.
The system takes a while to bleed, just let the car warm up, put the heater on full blast, refill the coolant and use the bleed screw to get the air out.
You shouldn’t be working on cars
Wow, my first hater, I've really made it on RUclips. 🤡
Bro really showed and provided no real info
@@Jeditrunks I love how you came here to hate, literally a whole video showing the whole process, If you can’t follow instructions, simply find someone else to watch instead of being a miserable internet warrior.
Excellent video. This is one of the best repair videos of any car that I've seen.
I appreciate that! More to come soon.
very good video, it shows at the appropriate points the actions of disassembling and installing the radiator on A4 b6 1.8 manual.
Brilliant video mate, you honestly made it look so easy! I Need to replace mine at some point too as mine has started to leak! haha
Haha it took two days because I got the wrong part, but I appreciate it! And yeah it’s best to replace it soon, so it doesn’t get worse!
@@Lu-gm9mx Have you got an Instagram for your B6 mate? think i've followed nearly everyone on insta that owns a B6 🤣
@@IIKPSII lol I don’t have it specifically for the b6, but it’s artsy_lu
What’s the 70 dollar part that you don’t wanna break called? I need to replace it
I believe that’s the top radiator hose.
www.autozone.com/cooling-heating-and-climate-control/hose-lower/p/rein-upper-radiator-hose-chr0397/607183_0_0?cmpid=LIA:US:EN:AD:NL:1000000:BLH:19489353529&&CATARGETID=120054150001289697&CADevice=m&gad_source=1&gbraid=0AAAAADkcoVsi5r5BGu8tZQSHN2Eb4wMxG&gclid=Cj0KCQiAo7KqBhDhARIsAKhZ4uhrbrFOdUtQBQtu9Zgodu05btamdx-Hi6zX3kO8CO8I53DK64pZiRcaAqSsEALw_wcB&gclsrc=aw.ds
@@Lu-gm9mxit says it doesent fit my vehicle my Audi a4 Quattro 2004 but it looks the same as the one I pulled off
@@foxtrotgrendaider260 yeah it’s the same bro.
Thanks man
You’re welcome!
How did you ensure that the bottom radiator coolant flange seated and connect properly I tried to place in there a couple times but would seat unless the o ring was removed.. do I just have a bad o ring?
You should definitely change that oring, and it should feel like a pop.
I’m going to replace the radiator as well, but How did you end up bleeding the system out of air?
There is a bleed screw on the top cross pipe, it’s a 5mm Allen.
will this tutorial work on the 2008 a4 quattro?
@@isaiahhensley84 I’m not entirely sure, but it may be similar if it’s the b7.
Was your leaking bad. Like fill it up everyday.
Yes, most expensive 2 months.
Heya, its been a while, I'm glad to see you're doing well Unc Olu.
Hey hope you’ve been good yourself.
Hey man, great video and very helpful. Any advice on getting that clip all hooked on (around 25:41) it feels like it only goes so far and the clip seems useless since it isn’t going on all the way but I know it should? Anyway thank you for the video used a lot of it
It’s very tricky, and it should really just clip down, or you can try to get one clip arm at a time, that usually works too.
And thanks a lot!
Where did you order the radiator from ?
Autozone, sorry.
Bro that oil trans line at the top of the radiator where can I find that or the part number
Not sure what part that is.
This audi have turbo?
Yes it does.
How do I replace both fans on Audi A4 B6 model. Pls help🙏🏻
I think you have to put the car in service mode, and take the fans out from the other side. Not from where the radiator comes out.
@7:04 what's the name of that part? Because I broke mines, lol I need to order one, but don't know what it's called
The upper radiator hose?
@@Lu-gm9mx Yep, I found it. I just ordered one. Tyvm
@@blackparadise5975 no problem!!
What was wrong with your rad? today I noticed some moist area on the bottom of my rad and I'm losing coolant but very slowly.
It had cracked after I hit a duck in snowy Missouri backroads. And yeah you might need to check your water pump, hoses, and thermostat to make sure it’s also not leaking from those places.
@@Lu-gm9mx God damn haha!
I've checked everything defo the rads leaking as the moisture is on the front bottom of the rad, I can see it through the front of the bumper, if it were the waterpump it'll be coming from the bottom of the sump, not surprised though car is pretty old though the previous owner took good care of it and so do I.
@@GCS88 oh yeah, if it’s the original rad, then its most likely time to replace it.
@@Lu-gm9mx Yea its the original rad... Gonna do a refresh on it pal, I already have the coolant flange and thermostat housing so i'm actually glad that the rad started leaking before I install any of those parts
@@GCS88 exactly! Good luck man, and don’t lose the clips lol.
What yr is ypur car
2002
i done it for A4B6 its like charm compare to A6C6 V6 engines , to change cooling fan its damm shit job
We're not gonna talk about you skipping the transmission line
Wym? I have a manual trans.
At the end of the video you moved the phone so much so we could not see when you bled the system, Thanks any way, for the most part it was very interesting.
The system takes a while to bleed, just let the car warm up, put the heater on full blast, refill the coolant and use the bleed screw to get the air out.
You skipped the transmissions lines on the passenger side
I have a manual trans that’s why 😅.