How To Choose The Right Pressure Washer Nozzle | Mi-T-M Corporation
HTML-код
- Опубликовано: 4 июн 2024
- Choosing the right nozzle for your pressure washer is very important for doing the right job. Picking the wrong pressure washer nozzle could result in costly damages. Learn which nozzle you should use. www.mitm.com/support/videos/h...
Learn more about nozzles: www.mitm.com/support/videos/h...
Shop nozzles: www.mitm.com/pressure-washers...
Here is what we'll cover in this video:
00:00 Red - Zero Degree Nozzle
00:30 Yellow - Fifteen Degree Nozzle
00:40 Green - 25 Degree Nozzle
00:50 Black - Low-Pressure Nozzle
00:58 Rotating Nozzle
01:22 Long Range Detergent Nozzle
Who is Mi-T-M?
Mi-T-M Corporation is a leading designer and manufacturer of high-quality industrial equipment including pressure washers, air compressors, and generators.
----------------------------------------------------------------
Follow us here!
• Website - www.mitm.com/
• Blog - www.mitm.com/blog/
• Facebook - / mitmcorporation
----------------------------------------------------------------
Hi,
Thank you for the video.
I´d like to buy a underbody lance (code MVUBL) for an AR Blueclean 610. This pressure washer has the specifications of 1885 PSI (130 bar) and 2.1 GPM (8.3 L/min) and it has a valve to adjust the pressure water. It has the VARI-SPRAY NOZZLE HEAD AL413R (I couldn´t find the orifice size data of it).
I´d like to ask you about the exact nozzle size: do I have to consier the maximum PSI and GMP for select the correct nozzle for the underbody lance? In this case the nozzel size will be 3.5.
What about the other pressure achieved with the adjustable pressure valve? For example, if I adjust it to 1000 PSI, will I have to change the nozzle tip to another (example: 4.0)? or always I have to use the same tip with its orifice size related to the MAXIMUM PSI and GMP even when I decrease the pressure?
Thanks a lot in advance.
Where are guys located and do you ship to Australia?
Hi Kim! Thanks for your message.
Our headquarters are located in Peosta, Iowa.
We don’t sell direct, but you can contact this local distributor or a John Deere dealer would also sell our equipment.
BAR Group
15 Hudson Pl
Mulgrae NSW 2756
Australia
Ph: +61 2 4577 2144
The tips that came with my 3300psi/2.5gpm pressure washer are sized correctly (the code stamped on each tip ends in "26", meaning 2.6 orifice size), but the 25 and 40 degree tips have "sharp edges". By that I mean the fan pattern is needle-like at the top & bottom edges. These needles have a tendency to tear into paint and wood and I can see & feel them even when the pump is off. I can minimize the problem by keeping the tip away from the surface and keeping it moving quickly, but I'd rather the problem not be present at all. Do all spray tips have needle-like edges, or do I need to get better quality tips?
Hi Jeff, The spray tips shouldn’t have “needle-like” sharp edges. If you can send us the model and serial number along with your name and address I'm sure we can help (www.mitm.com/contact/) You can also contact our Sales Support with the information at 1-800-553-9053. We would love to help you get this issue resolved. Thanks!
How to plug it to karcher k2?
The Karcher K2 model pressure washers appear to have the nozzle built into the wand so you cannot change them. You may want to contact Karcher for more information.
Which nozzle is best for cleaning your car
Hi Queen bmia,
The white, 40-degree nozzle is best for cleaning vehicles. If you have any other questions, feel free to give us a call at 1-800-553-9053.
can we wash marble with this
Yes … carefully…. Do not get too close to the surface.
I want. This nozzle
www.mitm.com/find-a-dealer/
No high pressure on siding. Soft Wash only !!!
Do you know which nozzle to choose for your pressure washing project? #TechTipTuesday #pressurewashing
Choosing the right Nozzle for Your Water Pressure Washer Mi-T-M
Do you know what type of nozzle to use for each job? Learn in this video! ruclips.net/video/QXDNNWGnr9M/видео.html #pressurewasher