Easy way of cutting magnets.

[@YudiHermanto4H]

Related video :
Check this video. How to cut and shape a ferrite magnet, for car alternator :
ruclips.net/video/TZY7Ppa5AdU/видео.html
ruclips.net/video/Wle6O_g6jbQ/видео.html
Related video :
ruclips.net/video/8VdnA048yKM/видео.html
ruclips.net/video/tI-UUc8EpYs/видео.html
ruclips.net/video/v2I_7cMQNhQ/видео.html
ruclips.net/video/hfZ7wau6Jbc/видео.html
ruclips.net/video/O6bgrRs3Z68/видео.html

[@minercraftal]

I was expected to cut magnet pins and you are the only one send video😂

[@martymcmannis9121]

Thanks for the video,
Now I can cut my magnets down and do experiments. Thanks again

[@YudiHermanto4H]

Ok, you're welcome. May be useful.

[@gensyed]

never realized that you can cut magnets! Terima Kasih

[@YudiHermanto4H]

Ok ... hopefully it's useful.

[@tarlingkhongwir9467]

Never realized that magnet can be cut that way. Thank you.

[@khoirulbasyar5513]

Good job,I'll try later....thanks for the tutorial

[@ayobamiolajide4373]

Where to get this tools

[@pdtrsrao1235]

Which blade is used for cutting and polishing

[@YudiHermanto4H]

Related video :
Check this video. How to cut and shape a ferrite magnet, for car alternator :
ruclips.net/video/TZY7Ppa5AdU/видео.html
ruclips.net/video/Wle6O_g6jbQ/видео.html
Related video :
ruclips.net/video/8VdnA048yKM/видео.html
ruclips.net/video/tI-UUc8EpYs/видео.html
ruclips.net/video/v2I_7cMQNhQ/видео.html
ruclips.net/video/hfZ7wau6Jbc/видео.html
ruclips.net/video/O6bgrRs3Z68/видео.html

[@RODALCO2007]

Nicely done. great choice of music.

[@YudiHermanto4H]

Thanks for visiting my channel...

[@kottethirupathi3683]

smart work and art of work.

[@carlradford7318]

RODALCO2007 try

[@ayobamiolajide4373]

What is the name that you use?
Is it blade to cut,metal,concrate or file please tells

[@YudiHermanto4H]

@@ayobamiolajide4373 Please watch the videos below :
1). ruclips.net/video/v2I_7cMQNhQ/видео.html
2). ruclips.net/video/Wle6O_g6jbQ/видео.html
3). ruclips.net/video/TZY7Ppa5AdU/видео.html
4). ruclips.net/video/pbtBbkC1N3s/видео.html

[@jlourencot1957]

What kind of disk did you use to cut the magnets?

[@YudiHermanto4H]

It uses a thin metal cutting disc, 2mm thick.
But this is better/easier, using floor tile cutting discs :
ruclips.net/video/v2I_7cMQNhQ/видео.html

[@YudiHermanto4H]

Or watch this video too :
ruclips.net/video/TZY7Ppa5AdU/видео.html

[@jlourencot1957]

@@YudiHermanto4H thanks.

[@jlourencot1957]

@@YudiHermanto4H thanks.

[@paulanthonybridge5741]

Dynamite.

[@blueiscool8585]

If you have a lubricant like wd40 it helps keep the heat down a bit

[@lelegokiltjchannel6561]

Mas bro bisa untuk rotor nggak mas?

[@YudiHermanto4H]

Bisa banget mas.

[@lelegokiltjchannel6561]

@@YudiHermanto4H ok mas saya amati dulu ya videonya biar faham😆😆😆

[@mrfrontranger7911]

thanks for the demo

[@spdas5942]

Doesn't the magnet go demagnetized by cutting, sir ? Ans plz .

[@YudiHermanto4H]

Maybe the magnetic power is reduced a little, but the difference before and after the cut is almost no difference.

[@simpleman102]

Which type cutting wheel ???

[@YudiHermanto4H]

ruclips.net/video/GOr-BGDbuS8/видео.html

[@YudiHermanto4H]

The usual for cutting iron. He has a thickness of 1.2mm.

[@engkuchannel4340]

Mas...lu pintar bangat...salute...respect sama lu

[@YudiHermanto4H]

Mungkin hanya kebetulan karena hobi saya demikian, suka hal2 yang berbau teknik.
Kalau yang di video ini masih agak susah biarpun work.
Cara potong yang terbaru, mata potongnya pakai mata potong keramik, yang ada bintik2 diamon nya.
Coba cari vedeo nya, kalau tidak salah ingat ada 3 video potong magnet pakai mata potong (piringan) keramik.
O ya, link video ada dikomentar yang saya sematkan.

[@engkuchannel4340]

@@YudiHermanto4H ya...Saya sudah periksa link linknya...keren... cuma saya baru komentar hari ini hahah

[@YudiHermanto4H]

@@engkuchannel4340 ooh..😂
Ok mas, semoga bermanfaat.
Terima kasih sudah berkunjung di channel saya 😂🙏

[@familialopezballesteros2327]

Felicitaciones por el trabajo, es genial, permiso lo copio, un consejo amigo, sin ofender, ponerle protector a la amoladora, para que no sufras accidentes, un abrazo desde Argentina

[@YudiHermanto4H]

Ok, por favor si es útil. Gracias por su atención, el éxito es siempre para usted. Y que Dios siempre te proteja.

[@timothyaaron8603]

Does the magnet get hot?

[@YudiHermanto4H]

The magnet won't heat. Because when cutting is not pressed. Just scratch slowly.

[@chandersital513]

Thank you for this video jai hind

[@hajamohideen8586]

Super. Thank you very much bro

[@YudiHermanto4H]

Ok, you're welcome

[@marinrosu6192]

ce disc folosesti ,? cu diamant ,fara cele noua orificii de degajare ?

[@YudiHermanto4H]

Folosesc un tăietor de oțel cu grosimea de 1,2 mm.

[@Dopamine_Doze]

Yeah its easy but not good, heat will make your magnet weak so use some water to cool it down when cutting

[@YudiHermanto4H]

I've cut the magnet many times, and everything is fine.
Check this video :
ruclips.net/video/Wle6O_g6jbQ/видео.html
ruclips.net/video/v2I_7cMQNhQ/видео.html
ruclips.net/video/Advlka5yTYY/видео.html

[@Dopamine_Doze]

@@YudiHermanto4H yes but you lose magnet force not a lot but like if you were cutting in so many pieces it can potentially make damaged but not a lot

[@johnconrad5487]

You have a very steady hand. almost looks like a machine moving back and forth . thanks for sharing. Is that a diamond blade? why do you need to cut the magnet? what will you do with the pieces?

[@YudiHermanto4H]

Thanks for visiting my channel.
That's the usual iron-cutting knife.
Its thickness is about 1mm. Thinner than standard size.
Using a diamond blade may be better. I use the knife, just trying to use the makeshift tools I have.
I cut the magnet to make it like this :
ruclips.net/video/QmAFyJH6_hM/видео.html
ruclips.net/video/hkyRcuHbmFs/видео.html
ruclips.net/user/edit?o=U&video_id=iKIrzIqqRts
ruclips.net/video/28KJ90CL6oQ/видео.html

[@YudiHermanto4H]

"And he can make a bomb out of a piece of biscuit."
The words were a conversation on a movie. But I forgot the title of the movie and the actor.
The conversation always inspires me to make something with makeshift ingredients !!!

[@johnconrad5487]

thanks for your reply. I watched the links you provided. you are a very clever guy

[@YudiHermanto4H]

Thanks for the support ...

[@Mr.JamboJ]

T

[@Edmorbus]

Good job

[@YudiHermanto4H]

Ok ... hopefully it's useful

[@lastride9875]

If u cut magnets will they loose their strienght?

[@YudiHermanto4H]

If measured by tool, it may be slightly reduced. But feeling the power with my hand, by holding the steel close to the magnet, it's like there's no difference between before and after being cut.

[@YudiHermanto4H]

Check this video. How to cut and shape a ferrite magnet, for car alternator :
ruclips.net/video/TZY7Ppa5AdU/видео.html

[@YudiHermanto4H]

Or this video :
ruclips.net/video/Wle6O_g6jbQ/видео.html

[@YudiHermanto4H]

Related video :
ruclips.net/video/8VdnA048yKM/видео.html
ruclips.net/video/tI-UUc8EpYs/видео.html
ruclips.net/video/v2I_7cMQNhQ/видео.html
ruclips.net/video/hfZ7wau6Jbc/видео.html
ruclips.net/video/O6bgrRs3Z68/видео.html

[@MoisesVelasquez-kg6gp]

exelente

[@YudiHermanto4H]

Ok, thank's.

[@YudiHermanto4H]

You also need to watch this one :
ruclips.net/video/Wle6O_g6jbQ/видео.html
ruclips.net/video/v2I_7cMQNhQ/видео.html

[@casasolar64]

DISCULPA EN QUE PAIS VIVES

[@YudiHermanto4H]

Vivo en Indonesia, saludando amistad de mi parte.

[@pujalapurnachandrarao296]

Thank-you Explain t The best Video

[@YudiHermanto4H]

Ok, you're welcome ... hopefully it's useful

[@rezafkampay1213]

Sisa2 potongannya kemana mas? Didalam grindanya kan ada besi juga... Apa ga lengket kesana...

[@YudiHermanto4H]

Karena rpm gerinda cukup tinggi, sebuknya terlempar cepat juga, tidak masuk ke gerinda.

[@grabitz]

Good job but be careful with those fingers.

[@YudiHermanto4H]

Thank you ... success is always for you..

[@taboosaboo]

That tool is too powerful for open toes too.

[@johnhempstead3074]

i like this thanks.

[@YudiHermanto4H]

Thanks for your support....

[@gilbyadams7360]

Mantap. Salam satu elektro

[@YudiHermanto4H]

Terima kasih, mas bro.
Cek video ini mas, pakai mata potong keramik lebih mudah :
ruclips.net/video/Wle6O_g6jbQ/видео.html
Atau klik link komentar yang saya sematkan/komentar saya yang paling atas.

[@sanijoesoep4455]

Waduh.. asal jgn kepanasan ya. Kekuatan magnetnya bisa turun permanen.

[@YudiHermanto4H]

Apalagi panas bro...anget saja cuman dikiiiiitttt....😂😂😂..hampir tidak terasa angetnya.

[@YudiHermanto4H]

ruclips.net/video/v2I_7cMQNhQ/видео.html

[@YouTubeYouTube-qg6vl]

Di potong buat apaan mas????????? Kalau boleh tahu

[@YudiHermanto4H]

Cek video2 playlist ini mas : ruclips.net/p/PLajok_EjFfbPFpXivHJP_jDApZSL9i_oh

[@YouTubeYouTube-qg6vl]

@@YudiHermanto4H mas magnetnya koq pecah nggak mirip besi batangan. Pinggiran magnetnya hasil potongannya nggak rapi mas pinggiran nya

[@salimkumar1414]

Thanks

[@YudiHermanto4H]

Ok..
May be useful

[@pintumondal5819]

good,very good.

[@YudiHermanto4H]

Thank you for your support.
Thanks for visiting my channel.

[@mrakjunior]

simple and upto job.

[@YudiHermanto4H]

Thank you for visiting my channel.

[@suraj_k_videos]

Kon sa disk hai

[@YudiHermanto4H]

ध्वनि-विस्तारक यंत्र / loudspeaker

[@prass353]

Mata grindanya pake yang apa om?

[@YudiHermanto4H]

Pakai mata gerinda potong biasa/mata potong besi, pakai yang tipis tebal 1.2mm, saya biasa pakai merk WD, jangan yang semacam kinik/resibon, itu terlalu tebal.

[@louiearciga1770]

all wrong. safety first, guy. notice no safety shoes, gloves, guarding. if you're going to demonstrate how to cut stuff, be safe.

[@god_bika]

No. Tthe lack is the overheating lowers magnet B vector. Perhaps at very least you have to put them in freezer before this

[@YudiHermanto4H]

Maybe you need to watch these videos, for additional reference :
ruclips.net/video/TZY7Ppa5AdU/видео.html
ruclips.net/video/_6tZ9XBRyBU/видео.html
ruclips.net/video/Wle6O_g6jbQ/видео.html
ruclips.net/video/8VdnA048yKM/видео.html

[@ТимурК-ч8в]

Молодец 👍🏻

[@YudiHermanto4H]

Важно следить за этим, ведь пользоваться керамическими ножами намного проще :
ruclips.net/video/v2I_7cMQNhQ/видео.html

[@angelojoson1736]

Pinoy or indian?

[@YudiHermanto4H]

Indonesia

[@mikemadsen2716]

dangerous dust

[@aggabus]

Spark

[@markbegley1564]

THANK YOU

[@mohammadashrafansari29]

Konsa patta use kare megnet kaatne me

[@moacienergialivre8270]

Muito bom amigo!!!!!!

[@YudiHermanto4H]

Obrigado amigo.

[@mrbestff8236]

How can i get the magnet pieces

[@cbcarper9681]

👍👍👍👍👍👍👍👍👍

[@shorabali4191]

😍😍😍😍😍😍😍😍

[@lovepreetsinghgill517]

Seing second time

[@YudiHermanto4H]

You also need to watch this, different cutting discs are used :
ruclips.net/video/v2I_7cMQNhQ/видео.html

[@ienLanhTuanThiTV]

Hot magnets to low

[@YudiHermanto4H]

Maybe the magnetic power is reduced. But it doesn't feel, even like nothing has changed.

[@YudiHermanto4H]

Try watching this video :
ruclips.net/video/v2I_7cMQNhQ/видео.html

[@bekimmara9793]

Easy way ??!!!!!!!
Is there any other way of cuting Magnet ?
What a Title
" Easy way cuting Magnet !!!!!!!!!!!!!!!

[@YudiHermanto4H]

I have tried other methods, but failed. And this method works.

[@mohdfazleyruslan8649]

He nail vary nice

[@hadiwijaya4771]

Terima kasih yutub kami tmb pengetahuan

[@alkolesnikoff6436]

Только один вопрос - ЗАЧЕМ???

[@YudiHermanto4H]

сделать это :
ruclips.net/video/28KJ90CL6oQ/видео.html
ruclips.net/video/QmAFyJH6_hM/видео.html
ruclips.net/video/hkyRcuHbmFs/видео.html

[@UBsLab]

First of all I will gift you a shirt and a naicutter.

[@YudiHermanto4H]

Hahahaha...I like the look of what it is.
See also here, ruclips.net/video/oOSauq2uc9A/видео.html
Thanks for visiting my channel. May be useful.

[@phillipj4831]

Respect

[@patigenitvmajalengka2063]

Taiii

[@YudiHermanto4H]

Thank you for watching .. your pronunciation is really good. 😉😉

[@TrionoBara]

@pati geni taiiiiimu cuk..

[@patigenitvmajalengka2063]

@@TrionoBara ga da guna nya dan manfaat nya.buat apa di buat

[@TrionoBara]

@pati geni makanya klo otaknya ga nyampai mending ga usah koment, coba liat video2 yg lain di channel ini? Mudeng ga,nyampai ga otaknya..

[@TrionoBara]

@pati geni ga guna mungkin menurut anda..coba baca koment2 dibawah anda..

[@paulanthonybridge5741]

Nevet underestimate the power of paper.

[@YudiHermanto4H]

You may need to watch this:
ruclips.net/video/Wle6O_g6jbQ/видео.html

[@prgammertutorial1029]

Bhai aapna camera naya le lo

[@maryamchaudhry5379]

U CALL THIS EASY

[@YudiHermanto4H]

Please try other methods that are easier. Then compare with this method.😀😀🙏🙏

[@maryamchaudhry5379]

Teknik Kreatif Alternatif oKay thank u its cause i dont have the right tools for this 😊but this is a good way

[@YudiHermanto4H]

@@maryamchaudhry5379 Ok, it is alright. Previously I have tried several methods, and what works is this method. Thank you for visiting my channel. 😀😀🙏🙏

[@daddyabhi2130]

soodi

[@YudiHermanto4H]

ok..thanks...

[@aggabus]

Spark