Audiolab 7000a Fully Featured Integrated Amp full in depth Impressions video 4k Pop Da hood @

Поделиться
HTML-код
  • Опубликовано: 17 окт 2024

Комментарии • 216

  • @ZeroFidelity
    @ZeroFidelity 9 месяцев назад +26

    Look at that huge jump in video quality! Well done! I love your under-the-hood breakdown. Keep on' keepin' on TJ!

  • @ThomasAndStereo
    @ThomasAndStereo 9 месяцев назад +16

    4K quality! Man I need to step up too. Great video and so much detail. You even talk about the screws!

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад

      Full Impressions after 7 months of playtime
      😆 just wanted to warn people about the screws as you know I use alot of hands tools with my job and I know some people don't so I had to warn them .
      Thanks Thomas ' long video I know,
      I was going to make part 1 and part 2 but subscribers said No make one long video lol

  • @tee-jaythestereo-bargainph2120
    @tee-jaythestereo-bargainph2120  9 месяцев назад +5

    Hey Everyone in my description box I posted all 3 of my short video 'music takes' using the 7000a ' thanks for stopping in hope you all like the new camera and mics and my 1st video I used 4k video editing APP 😃

  • @VictorEnnis-n1w
    @VictorEnnis-n1w 9 месяцев назад +2

    Terrific video and review. I have a 6000a with klh model 5’s. I really dig your enthusiasm and attention to detail. I appreciate you brother and you keep being you. You’re one of the best at doing this in my humble opinion. Have a great one.

  • @junichiikeda5860
    @junichiikeda5860 5 месяцев назад +3

    Your reviews are excellent. Popping the tops off the amps is great !!!!

  • @brandondempsey6833
    @brandondempsey6833 9 месяцев назад +2

    TeeJay your videos have scaled up on a major level. Wow man you went into depth with video review, I watched it all thanks TeeJay Audio/video Quality is great

  • @markbutcher2734
    @markbutcher2734 7 месяцев назад +2

    TeeJay - I was looking for reviews on the Audiolab 6000cdt landed on this amazing channel - just had to subscribe! What a channel!!! You still rocking the Audiolab 6000 CD transport. Again - what a fun place to visit! Keep up the great content - it's so genuine and informative. Mark

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  7 месяцев назад +1

      Thank you , I got in the new 7000cdt also 😃 comments like this keep me going ' thanks again for subscribing

  • @trashkovic
    @trashkovic 6 месяцев назад

    Could agree more on your review of the sound coming out of this amp. One of my favourite bits of audio kit I’ve ever owned

  • @javiers.3433
    @javiers.3433 9 месяцев назад +1

    TJ great review and pulling the trigger in this unit due to you. I thought Andrew and terry had THE review for this unit however they were blown out of the water by your assessment.

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад

      Thank you so much we all have our own unique style ' 2024 I will bring some interesting editing to future videos '

  • @williamcanada6195
    @williamcanada6195 9 месяцев назад +1

    Wow!! Welcome Back !! Happy New Year Health and Happiness !! Bill from Northeast France !!

  • @randharma
    @randharma 6 месяцев назад +1

    Tee-Jay watched your review on the 6000a and bought a demo yesterday. The stuff you review and use is where I am at; thanks for ‘popping the hood’.

  • @TriAmpHiFi
    @TriAmpHiFi 9 месяцев назад +2

    OK, I think that was an outstanding presentation.
    Acid Jazz, Funk & Brass 🔈🔉🔊

  • @markorchard2272
    @markorchard2272 5 месяцев назад +2

    TJ.... I'm a Brit. I was initially (and stupidly) put off by your strong accent, but your videos are GREAT. I have worked in Electronics manufacturing for years (from hifi to military avionics).
    Bought a 7000a based on your review here. WOW!! Not disappointed one little bit!!

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  5 месяцев назад +1

      Solid Integrated amp '
      I been having alot of fun with the 7000a check out my 2nd short video '

    • @markorchard2272
      @markorchard2272 5 месяцев назад +1

      @@tee-jaythestereo-bargainph2120 getting a 7000cdt next week

    • @markorchard2272
      @markorchard2272 5 месяцев назад

      7000a +7000cdt is spectacular.

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  5 месяцев назад

      @markorchard2272 yes sir !! I like the 7000cdt alot ! And I have the 9000cdt as well '

    • @markorchard2272
      @markorchard2272 5 месяцев назад

      I’ve the 7000a/cdt and some Dali Oberon 3s. Should I get a 9000a or better speakers? What is your opinion?

  • @Kukkema
    @Kukkema 9 месяцев назад +1

    Great job 👏. Really enjoyed it. Also enjoying your tidal playlist, keep adding to it ✌🏼

  • @valeriobarbella1394
    @valeriobarbella1394 Месяц назад

    Hi Tee-Jay! I'll get straight to the point. I have the Elac dbr62, i listen to everything, from jazz to electronic but mostly metal. Very aggressive and chaotic metal :D
    Would you recommend the 7000a or the 8300a?
    Ps. I don't care about HDMI, optical, etc. outputs. If they're there, fine, if they're not, who cares :D
    Thanks in advance!
    Greetings from Italy

  • @OGmolton1
    @OGmolton1 25 дней назад +1

    Thanks a lot for dooing these videos, amplifiers are so cool and so important to see on the inside. I found it interesting this thing is using the tiny version of the ess9038 chip. Most of these more high end devices seem to use the beefy 8-channel variants but those little guys sound pretty grreat too. I think they have less channels making for a much simpler design

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  25 дней назад

      @OGmolton1 yeah Audiolab has been engeenering their dac around the ESS chip for almost 13 years ' and they have made such good synergy with built in dacs very own powersupply and output stage ' the dac in the 7000a destroys the dac built into the Denon pma1700 and it's the same chip but different designed ' circuit' which is just as important as the chip it's self

    • @OGmolton1
      @OGmolton1 25 дней назад +1

      @@tee-jaythestereo-bargainph2120 reminds we a lot of the topping d10 if thats a little opamp to the left there and thats a very decent dac

  • @spuddyl9938
    @spuddyl9938 9 месяцев назад +1

    Great review Tee-Jay. Question, which Opamp did you use in the Aune dac when you compaired it with the built in dac of the 7000a?

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад

      Sparkos SS3602 ' but what I was getting at is Audiolabs built in dac sounds best with the Audiolab intg amp - shortest signal path the Aune X8 is still a great dac for the price !
      Alot of the budget building the 7000a was spent on the internal dac espically the internal clocks I showed did you see the size of the Xmos digital integrated interface ?
      I never in my life heard I built in dac sound that good ! Most intg with built in dacs aren't very good under $2k U.S.

  • @JR-ho5qm
    @JR-ho5qm 9 месяцев назад +1

    That’s a pretty good pice for what you get. I wonder how the 7000a compares to the new Yamaha NR1000a?

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад +2

      I would love to compare them '
      I have the AS1200 but pure analog no dac all amp and 3k ' And I love Yamaha put speaker pairing is a Pain !! Yamaha is picky man ! But when it's good ohhh myyyy !

  • @lloydbrown3223
    @lloydbrown3223 9 месяцев назад +1

    TJ, great video. Dig your love of Audiolab. I have the 6000a with Polk r200's, and think it sounds amazing. The upgrade bug is real. I could get the 8300a ,used, and external dac for probably less than the 7000a. From a sound perspective only, what are your thoughts on that?

    • @carlitosgomez71
      @carlitosgomez71 9 месяцев назад

      I would get a power amp added to the 6000a and use a mid priced dac for better results, you could even bi amp if speakers allow it

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад

      That's a tuff 1 depends on what you want out of your speakers 8300a is almost colorless very very transparent but hell of sweet top end Airy/Sparkle is very good but 8300a does not have a subwoofer output and the fullrange pre-outs can only be used in pre-amp mode Preouts don't work in integrated amp mode which is a bummer for some pep
      The 7000a does have more color to the sound but it's still 'fairly' netural relaxed sounding ' And the built in dac dam it's really good ! I haven't tried the R200s but but I do have the Lsim 703 ' Personally sounds like you really like the 6000a So on that note I'd go 7000a it's the big brother to the 6000a and you would have fullrange preouts that work in integrated amp mode ' Hope this helps

  • @Retro_Analog
    @Retro_Analog 9 месяцев назад +1

    Great review TJ‼️ What kind of speaker cables are you using with your KEFs?

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад

      SKW ' from Amazin about 160 bucks their ok I like my clarity cables better 100 bucks!

    • @Retro_Analog
      @Retro_Analog 9 месяцев назад +1

      @@tee-jaythestereo-bargainph2120 That's what I thought! I'm running those as well! Great bang for the buck!

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад +1

      @@Retro_Analog hell yeah !!

  • @StereoTherapy-m7x
    @StereoTherapy-m7x 6 дней назад

    Great Video. Thanks for sharing. I like the fact that you opened it and showed us the inside. I have one question, if I may. Can I connect my Marantz 2230 to it as a preamp? If I can, can I still use the HDMI(arc) when I watch my TV. I want to use my 2230 as a Preamp when I listen to radio and turntable and use the Audiolab for my TV and streaming. Is that possible?

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  5 дней назад

      @StereoTherapy-m7x no when you put marantz in preamp mode means you have to put 7000a in amp mode ' 'amp only' not intg amp anymore bypasses Audiolab7000a internal pre which connects the dac .

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  5 дней назад

      @@StereoTherapy-m7x they only way to do this is to turn audiolab back into intg amp mode to use HDMI -

  • @joseadan5024
    @joseadan5024 3 месяца назад +1

    Hello Tee-Jay, really appreciate the value you deliver, as I took it and I'm very happy with the Audiolab 6000A and Triangles Comente 40th using Eversolo DMP-A6 ME as streamer, altough wonder if the 6000A is not a bit behind such speakers and streamer and thinking on moving to the 7000A as I don't want to lose any of its "greatness" but, it is sooooo similar to the 6000A, in case you have tested it with the Triangles, would you share your comments about improvements respect to the 6000A? Thank you in advance!!!

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  3 месяца назад +2

      No problem buddy ' as you know I am not a salesman "
      If you upgraded to 7000a you will have a LITTLE bit more power espically dynamic range and Bass Attack but it's a small difference the biggest Value with 7000a besides a little bit more power is the built in dac it's Great !! Even rivals my dacs costing $700-800 U.S. and having HDMI/USB also is big feature for some people Bluetooth is pretty killer as well it even shows the songs playing on the upgraded display screen
      That's has many different display options
      Another great feature is the analog inputs not dac inputs but analog inputs have gain level match from -5 to 5+ db which would allow you to add more gain. ' As far as over all resolution With analog inputs the 7000a barley edges out the 6000a but internal dac vs dac 7000a is supreme ' but I take it your using the eversolo as dac/streamer which should be just as good as built in dac of 7000a Which eversolo uses the ESS9038q2m honestly for the price of 7000a I'd urge you not to buy the 7000a '
      Your 6000a with eversolo should be just as good yes 7000a has a tad more power but for price I think you can do much better by buying an standalone amp and using 6000a as preamp ' if you bought something like the Galion TS-A75 You'll hear a bigger difference lots of powaaa and great bass ext and dynamic range even at low volume ' But if you wanted an Intg amp I would reccomend the New Marantz 50 2ch class AB amp it's pure analog so you could just hook up your eversolo to it ' it's powerful and one of the best Intg Amps I have heard with 🔺️ 40th ' but make sure you get 2 channel model ' it can draw up to 65amps !! That's great for integrated amp ' during my review of 40th I said 6000a is good up to mod volumes but I would actually reccomend if you listen at loud volumes to use speakers that are 89db efficency and above to have that full flesh n body Sound ' espically at louder volumes Even the New Denon PMA 1700 I am about to review sounds great with 40th ' I hope this helps I wrote a book ' 😆
      Because I am here for you all not the audio companies '

    • @joseadan5024
      @joseadan5024 3 месяца назад

      @@tee-jaythestereo-bargainph2120 thank for such a response! I'll take a look on the options you list considering the possibilies of getting one in Mexico. Best regards!

  • @laparoscopically
    @laparoscopically 5 месяцев назад +1

    Dear TJ i have kef q950. I previously had cxa81 and loved the bass and energy and soundstage but found the combo very fatiguing. Would 6000a be a better match for the speakers? Appreciate the input. Love your channel!

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  5 месяцев назад

      You know I have to be str8 up '
      I am not a salesman buy the Marantz PM 8006 !! And you will love me for it ! I owned the q900 2 years before I started my channel they do like a little power so Headroom is a must ! But Marantz doesn't come with built in dac !! Do you use outboard dac ? Also the Pm8006 goes on big time sale at like accessoriesforless.com and that intg in built in Japan !

    • @laparoscopically
      @laparoscopically 5 месяцев назад +1

      My dac is ifi zen blue​@@tee-jaythestereo-bargainph2120

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  5 месяцев назад +1

      @laparoscopically hell yeah love ifi dacs ! They really are badazz !!
      Trust me buddy get the PM8006 ' the imaging and fullness is great and top end isn't overly bright it is slightly tilted up but the resolution keep it from sounding to fatiguing with your Q950s ' I just don't think 6000a has enough balls for that tower speaker and I want you to have hell of dynamic range and Headroom '

    • @laparoscopically
      @laparoscopically 5 месяцев назад

      Ok will return the 6000a. Would you pick the marantz or the galion ts75? Forgot to tell you i have a kef 10" subwoofer too. Thank you sir!​@tee-jaythestereo-bargainph2120

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  5 месяцев назад

      Well with Galion you will need a Preamp ' That's more cost hell of amp though God ohh mighty is it good ' But more Money 💰 I thought you wanted to go Intgrated amp ' did you have a Preamp in mind ? For the price you can get Marantz for now be hell of bang for da buck '

  • @jimsregaturntableshifijukebox
    @jimsregaturntableshifijukebox 9 месяцев назад +1

    Very nicely done TJ👌
    JIM🏴󠁧󠁢󠁳󠁣󠁴󠁿🙂

  • @KCsabi
    @KCsabi 7 месяцев назад

    Great review! I like especcialy that you take apart and offer an inside look in reviewed gear.
    I've got the 7000a, paired with Elac Unify Reference bookshelf speakers.
    My only fear is because the amp heat the room like a toaster.

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  7 месяцев назад

      Yes the amp does get a little warm
      Use some old cork squares underneath the amp in all four corners wear the feet are ' like they
      Use with Record players ' this will lift the amp up for better airflow and disapait the heat, under the 7000a are some very nice vents ' and those square cork will help with vibrations no since in buying $200 esoteric feet !!

  • @77bjornw77
    @77bjornw77 5 дней назад

    Great, detailed review!
    I’m considering either the 8300A or the 7000A. I will use it primarily in analogue mode, and I’m really not interested in Bluetooth or HDMI etc. I can get either new for the same price of around $1000.
    For my needs I guess the 8300 is the better choice, but I’m also thinking some things may have improved with the newer 7000A model? And the supposedly beefier bass of the 7000A also talks to me. Very difficult decision. 😅

    • @SpineTingler007
      @SpineTingler007 19 часов назад

      I would LOVE to get the 8300 for $1000. That would be a home run.

  • @christophergaus3996
    @christophergaus3996 6 месяцев назад +1

    I love your diffusers man! ❤

  • @themarklar8759
    @themarklar8759 9 месяцев назад +1

    TJ! My dude! Loved this ultra detailed review and video breakdown, probably the best one I've seen for this Audiolab amp! Question for you, at the begining of the video you recommended this amp for speakers at 86db or above. I have the KLH Model 5s (love them) and have had them for 3 years now. I am still trying to find the right class AB amp to power them with authority. Do you believe the 7000a will do that? Model 5s are 87db sensitive so within your spec to recommend the 7000a, but I'm thinking once again there may not be a lot of headroom. What are your thoughts on that and do any other amps come to mind to authoritatively push the Model 5s? I have looked at the 9000a but haven't auditioned it, but also wondered if all that extra dough was worth it. Thanks TJ!

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад +1

      No the 7000a I dought will drive them with authority or effortlessly just keeping It real !
      My dude Zero-Fidelity reccomended the Yamaha AS-1200 with Models 5 he said synergy is 🔥 You can catch AS1200 on sale at times ! But it's pure analog and a 48 pound amp !
      Thank you for the comment I sent ZF an Email asking what other Amps pair up good I will let you know what he says when he replies 😀

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад +1

      Hey I asked Zero-Fidelity he said the new adcom 555 classic power amp sounds great on model 5s you just need to find a preamp !

    • @themarklar8759
      @themarklar8759 9 месяцев назад

      @@tee-jaythestereo-bargainph2120 badass. Appreciate you looking into it and asking Sean as well! Thanks TJ!

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад +1

      @themarklar8759 your welcome he just replied back saying 7000a should be enough power if you don't have a large room and that you don't listen above 90-92db

    • @themarklar8759
      @themarklar8759 9 месяцев назад

      @@tee-jaythestereo-bargainph2120 I have a tricky listening room because it's my living room which is about 22x16 but the tricky part is the living room opens to the kitchen and dining area, so it doubles or triples in size due to no walls lol. Sooo...I am going to look into that Adcom!..... Just looked at the website. Dude that amplifier looks badass!!! A total beast! An Eversolo Dac + preamp + Adcom sounds pretty badass! Now all I gotta do is convince the Mrs. 😆 Thanks for all your help TJ! You rock!

  • @javiers.3433
    @javiers.3433 9 месяцев назад +1

    One thing, how do the pre amp sections compare? What was full testing like thank you.

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад

      Jan Erthner lead engeener fine tuned the preamp section of the 7000a
      For higher performace and the added Volume sentivity gain level in my opion is a huge plus depending on if your Transport has a hot/cold input signal '
      I used the Iota Sa3/Emotiva dedicated Amps I also bi-amped
      Some of my hard to drive speakers with both Amps and I switched between them as in using one as integrated amp and the other just as a amp - and yeah without a dought
      7000a pre section is more refined and less dry - I love mismatching Amps because you never know when synergy hits thanks for stopping in !!

  • @christophergaus3996
    @christophergaus3996 7 месяцев назад +2

    Quality review as always, thanks man! Have you ever tried/built an Akitika amp kit? Their new discrete models are supposedly quite quite good! And at about $550 I think - I really want to give one a try

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  7 месяцев назад +1

      That's a good idea ! Just got the Galion TS-75 check out on me Community page 😆

    • @christophergaus3996
      @christophergaus3996 7 месяцев назад

      @@tee-jaythestereo-bargainph2120 That's another amp I really wanna hear!

  • @danca7268
    @danca7268 8 месяцев назад +1

    Could you please tell us which of the following amplifiers you think is the best for the Wharfedale Linton speakers: a Cambridge CXA81, an Audiolab 8300A or an Audiolab 7000A? Thank you!

    • @18yearsoldnot
      @18yearsoldnot 6 месяцев назад +2

      I demoed the 7000 vs the cxa81 this week actually. The speakers were wharfedale diamond 12.3 towers… For me, I’d get the 7000 but if I was starting out I’d get the 81. That’s because I already own an arcam sa30 with kef r3, so I wanted to make a system that sounded different in the first place. Basically if you like soft sound, Cambridge, if you like fast and arguably more impressive sound, 7000. I personally just bought wharfedale diamond 230s for £200 and the 8300 which I got used for less than £500… So there’s the price to worry about where you could add a sub if you get a good deal on the rest of the gear

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  6 месяцев назад +1

      I just saw this comment ' had alot of people tell me 7000a makes great pairing with lintons ' 7000a sounds Great with my Dynaudio emit 50s
      Big bold sound that's detailed built in dac on 7000a is one of the best in its class !!!

  • @almazmusic
    @almazmusic Месяц назад +1

    What about PC-USB details? Is it a Class-Compliant audio interface inside? Does it work with MacBook?

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  Месяц назад +1

      @@almazmusic MacBook and PC '

    • @almazmusic
      @almazmusic Месяц назад

      @@tee-jaythestereo-bargainph2120can you tell, does it uses an exclusive or inclusive mode? In simple - can I hear any other sounds in system, while playing from itunes or spotify?

  • @techno_hater
    @techno_hater 9 месяцев назад +1

    Please tell us about errors in the receiver's software, such as: failure to save filter settings after turning off the power, failure to display volume animation when adjusting via the ARC input, and delay in adjusting the sound volume via the ARC input.

  • @ericjohnson829
    @ericjohnson829 9 месяцев назад +1

    Seeing how slow the cpu is on that Audio Lab, I'm curiious if you have tried out one of the Eversolo Streamers ? While the meters etc can't quite keep up perfectly in real time, the Eversolo doesn't lag on every function or parameter change like that Audiolab with it's small display. The Evesolo display is just beautiful and unlike some, i really enjoyed the detailed sound of it. It just needs to be paired with the right gear.

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад

      That's a badass dac !! I want one !!
      My modified Burson composer has small display but 144db channel seperation is chord level but yeah I want thay dac badly man !! The Spectrum Ex meters look amazing
      I had to be truthful about 7000a lag in vu meters ! And the lab is using 2 high performace texas instruments 8 bit expanders I showed that's for Leds ' the digital vu is on point though!

    • @carlitosgomez71
      @carlitosgomez71 9 месяцев назад +1

      Displays are nice to have but not important in the whole scheme of things, sound quality is what matters most and displays can fail or burnout or even cause interference

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад +1

      @@carlitosgomez71 I agree 💯 but you can turn it off as well

  • @scottbennett3119
    @scottbennett3119 6 месяцев назад +1

    Thank you for this review! It was really well done!
    TJ, you have been quiet about it, but I have long been wondering about your AU717 Sansui integrated amplifier? I am worried that perhaps something may not have gone well with regards to it. I know they did a major overall on it. Please share what's going on with it. Please. Thanks

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  6 месяцев назад +1

      It's an amazing amp blows the doors
      Off all my Amps!!!! Conor went crazy on this amp '
      I just been busy working 70hrs a week , then 25 percent of my fellow industrial maint techs quit their
      Job we lost another Co worker inside a press he got crushed my 3 maint techs we have lost !
      @ Montaplast of North America !
      I got ya just because of you I will start on video !!!!!!! Appricate you

    • @scottbennett3119
      @scottbennett3119 6 месяцев назад +1

      @@tee-jaythestereo-bargainph2120 Wow! Sorry to hear of so many issues at work. Hope things improve soon! Thanks for going the extra mile to start the Sansui AU717 review!

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  6 месяцев назад

      @scottbennett3119 it's long over due yeah i shouldn't have mentioned about work

    • @scottbennett3119
      @scottbennett3119 6 месяцев назад

      No problem. It's okay to share when the pressure is high. Have a good one!

  • @ritish84
    @ritish84 3 месяца назад +1

    Hello Sir,
    TeeJay will the 7000a pairs well with Elac Carina bookshelf speaker??
    Thanks brother

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  3 месяца назад +1

      I would go with a More powerful amp in my review I mentioned I wouldn't hook 7000a up to a speaker that drops below 87/86db efficacy '
      Because you want good Headroom and dynamic range ' I have to be str8 up I believe you wouldn't have the full flesh n body Sound from elac with smaller amp ' 9000a yeah ' but the elacs I reviewed ub52 loved my Big Yamaha Amps'

    • @ritish84
      @ritish84 3 месяца назад +1

      @@tee-jaythestereo-bargainph2120
      Okay Sir, thanks for your advise,
      How about Cambridge CXA81 or Yamaha AS801??

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  3 месяца назад

      @ritish84 yes 😃

  • @waldowsxxghostxx8577
    @waldowsxxghostxx8577 8 месяцев назад +2

    How well would this drive the Tekton impact monitors with the 4ohm spec?

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  8 месяцев назад

      As long as it doesn't drop below 4ohms you should be fine 7000a drives my Dynaudios Tower that are 3 way bass reflex desighn speakers that are 86db 4 ohms with authority !

    • @waldowsxxghostxx8577
      @waldowsxxghostxx8577 8 месяцев назад

      @@tee-jaythestereo-bargainph2120 what do you mean if the amp drops below 4ohms could that happen if the Tektons only come in a 4 or 8ohm package?

  • @jedi-mic
    @jedi-mic 9 месяцев назад +1

    Great as usual review one thing the selector for gain 6 +/- dB I don't think you mentioned it on the preamp out doesn't it have it on the preamp out? Happy New Year you got a new place or change your room

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад

      I have 2 Music rooms nearfield Room you see in Video and I have a much larger entertainment room that's highly treated with Panels and diffusers '
      Many pics on my Community page '
      In video I said the input gain level is built into the pre-amp section of the Intg amp for 'analog inputs only' So yes it works In pre amp mode and Integrated amp mode ' Just doesn't work with digital mode or dac inputs coax/toslink/USB/HDMI only the 3 Analog inputs and Phono Pre EQ - So basically just in the analog domain of inputs.

    • @jedi-mic
      @jedi-mic 9 месяцев назад

      Right so do you know what the output voltage is from the preamp if you have maximum 6DB of gain? @@tee-jaythestereo-bargainph2120

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад

      @@jedi-mic I would have to have a schematics of the circuit ' And I couldn't find 1 ! I tried 😪

    • @jedi-mic
      @jedi-mic 9 месяцев назад

      Well you could measure the voltage with a vault meter set it on AC measure the pre amplifier RCA on One Channel and what it is at maximum and what it is at minimum, there is a calculator for that as well but I remember where it is of hand. I would say something like 5 volts ppv, question is what is its lowest point it can't really be less than half of Volts. When you got it on - 6 dB does it seem really quiet do you have to turn the maximum master volume up? Question is where the starting point is? I can't seem to figure that out if it say zero dB normally that's two volts peak to peak. I would say must be a vote in a half difference???@@tee-jaythestereo-bargainph2120

  • @janulik9535
    @janulik9535 9 месяцев назад +1

    I have also noticed new cool environment, so want to add my apretiation to this too, really nice space and video quality, not least very nicely made review,..very well understandable where I get some good impretion of what is product like, thx :), I was a smitch far from buying 7000a or 8300a because I am big fun of truthfull amplifiers with neutral sound which are not peaky about speakers,...at the end I luckely met second hand unit naim xs2 for nice price so I am currently with it and sounds good to me, but mmy curiosity about audiolab is stil there :D, I am whatching the video and adding /editing my coments along with, I have to say my agreement, realy hate the only banana option of my naim amp

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад +1

      Thank you might be easy to switch them 🍌 plugs out ?

    • @janulik9535
      @janulik9535 9 месяцев назад +1

      @@tee-jaythestereo-bargainph2120 thx for reply, sorry not sure if i understand 100% , im not native english speaker ;), but i realy did not consider the possibility to switch it. I hope they are ok as i belive naim does know what they do. However i am used to have tight conections wherever are some, and i am not audio specialist by any mean, but the forks you are using seems to me kind of …make much more sense to me,

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад +2

      @janulik9535 Naim makes great Audio !

  • @gratmatassa5432
    @gratmatassa5432 8 месяцев назад +1

    hi great video, maybe you could one day review & deep dive the Mission 778x amplifier ? cheers from the UK.

  • @williamcanada6195
    @williamcanada6195 9 месяцев назад

    How did it do with the Comète 40th ??? Also, would be interesting to compare to Denon 1700 PM

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад

      Actually the Audiolab7000a with 🔺️ 40th Comete was not a good pairing but 🔺️ with the Denon PMA 1700 OMG !! 🔺️ drop down to 2.5 ohms they like higher current Amps !
      Once I review Denon I will compare them And Schiit Combo !

  • @juicythedj750
    @juicythedj750 9 месяцев назад +1

    Awesomene video!
    The black/silver capacitors on the amplifier boards are the Panasonic "NHG" series! Also very good quality :)

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад

      Thank you sooooooo Much !!
      I looked everywhere kind of make since Audiolab used Panasonic speaker Relays on amp module really appricate the feedback !

  • @carlitosgomez71
    @carlitosgomez71 9 месяцев назад +1

    Hi tee jay is the preamp section much better than the 6000a

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад

      Pure analog or Pre with internal dac ?

    • @carlitosgomez71
      @carlitosgomez71 8 месяцев назад +1

      Just using the 7000a in pre mode to drive a power amp

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  8 месяцев назад

      Yeap I told everyone it's better for sure !! Reason I went in depth with popping the hood ' 🤪 Congrats solid Intg amp ! And Pre or power amp ! Great thong about Preamp mode is it turns the power amp off for less noise '

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  8 месяцев назад

      I miss read your ? Lol I thought you was saying hey 7000a is much better than 6000a as pre 🤣

  • @JPWinters
    @JPWinters Месяц назад +1

    Hey Tee-Jay where is the Emit 50 review? Probably just busy I'm guessing, but that should be a good one.

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  Месяц назад +1

      @JPWinters hey they flagged my video and gave me a 3rd strike so I had to delete it but give me 2 weeks I make new one '
      I played music in 1st one but at that time I was using a 25 mic and my lips were off audio so now I have $300 🎤 I have alot of shorts I do like the emit alot hell of bang for the buck but they won't be for ever one '

    • @JPWinters
      @JPWinters Месяц назад

      @@tee-jaythestereo-bargainph2120 Cool. Yeah I've seen the shorts they are good! I just bought some Evoke 50's, really enjoying the Dynaudio sound so far.

  • @thebigcurr
    @thebigcurr 9 месяцев назад +1

    I am really struggling to decide between the 7000a and the Marantz Model 40n. They both seem like excellent choices and I can find a used 40n for a similar price to the Audiolab. I am currently saving up for a pair of Buchardt s400 mk2s. Any thoughts on which of these two choices would pair best with that type of speaker?

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад +2

      Honestly I have never tried out the
      MARANTZ 40n - but I have owned many many Marantz Amps and I know the Marantz House sound very well ' but i do know Those Bucharts love power to wake up !
      My opion I'd Go Marantz 40n or the New Marantz 50 2 channel integrated amp basically the new Pm8006 but New 50 is pure analog but powerful up to 65 Amps of current!! with a 625va toridal transformer and Hdams ' I believe the Marantz will give you better bass control and fullness ' IMHO 😉
      But Zero-Fidelity has had the N40 he'd be a better reviewer to ask tha KS for stopping in

    • @thebigcurr
      @thebigcurr 9 месяцев назад +1

      @@tee-jaythestereo-bargainph2120 thank you! This is very helpful advice.

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад

      @thebigcurr that's what I am here for is you all ! Not the companies !
      Even if you have a ? Non related to video about audio I will do my best

  • @tessie4204
    @tessie4204 Месяц назад +1

    I need to choose between the cambridge CXA81 MKII and the Audiolab A7000. It is very hard to decide! Nice review :)

  • @audiophiliac
    @audiophiliac 5 месяцев назад +1

    You specifically mention Magnepan but how about the smaller models, eg LRS? This amp is around the price I was looking at and specs seem enough for them.

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  5 месяцев назад

      Yeah I mentioned from 2min-4 mins of video that the 7000a is no Powerhouse !
      I have to keep it real ' And I don't think it will drive your LRS you wouldn't have the dynamic range nor the Headroom '
      You want an amp that can drive those Maggie's effortlessly without putting a strain on the amp ' 7000a will get very hot with those speakers'
      7000a does not like speakers that drop down to below 4ohms I mean if you don't listen above 85/86 db then yeah you'd be OK " I am about to review the new Galion TS-A75 that's just a power amp but it will five the shit out of your Maggie's!! But if your looking for an all in one integrated amp ' the new Denon PMA 1700 will drive those Maggie's its rated to drive speakers down to 2 ohms !

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  5 месяцев назад

      Your speaker is like 3.3-2.8 ohms and about 80db efficant ' I mean you can always try the 7000a from companies like audio advisor who have exellent return policy ' Here's a link about your speakers '
      www.stereophile.com/content/magnepan-lrs-loudspeaker-measurements#:~:text=Magnepan%20specifies%20the%20LRS%27s%20nominal%20impedance%20as%204%20ohms.

    • @audiophiliac
      @audiophiliac 5 месяцев назад

      @@tee-jaythestereo-bargainph2120 thanks for the reply. One last question while I have your attention... I have found a good deal on Vincent SV-237, I suspect you would say similar to Audiolab. Vincent is rated at 2 x 250 Watt 4 Ohm.

  • @ZacksPLs
    @ZacksPLs 9 месяцев назад +1

    Great quality video

  • @BennyKsBandwidth
    @BennyKsBandwidth 9 месяцев назад +2

    Very nice video my friend! Nice to see you again!

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад +1

      Thanks Benny been working alot of Overtime ' but now as of 2024 all Mandatory overtime is over !!!
      Only working 4 days a week @ 13hr shifts 😴 So I will have 3 days off a week now ! And still getting 12 hrs of 1.5x pay each week

    • @BennyKsBandwidth
      @BennyKsBandwidth 9 месяцев назад

      @@tee-jaythestereo-bargainph2120 well that's a lot better! Yeah I've been working 5 times a week, but basically on call all the time so never really off of work. And no OT for me either unfortunately, but I'm trying my best to make time.

  • @gage4375
    @gage4375 6 месяцев назад +1

    Hey T,i want a warm sounding pre amp🤔.that brings out female vocals

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  6 месяцев назад

      Mackintosh I know it's expensive
      But you can find good ones on used market ' BUTT going depend of the rest of your hifi setup ' even an old vintage Conrad pre were warm wirh killer vocals '

  • @Kukkema
    @Kukkema 6 месяцев назад +1

    What isolation platforms are you using under the equipment?

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  6 месяцев назад +1

      It's a cutting board made from arcandia wood with small rubber feet on thr bottom let me see if I can find you link '

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  6 месяцев назад +1

      It's Acaia wood cutting board prices from 30-150 bucks mine they don't sale anymore but here's a cheap one from Walmart- somewhat alike
      www.walmart.com/ip/Schmidt-Brothers-Cutlery-Acacia-End-Grain-Gourmet-Cutting-Board/1527534896?wmlspartner=wlpa&selectedSellerId=0&wl13=720&adid=222222222781527534896_117755028669_12420145346&wmlspartner=wmtlabs&wl0=&wl1=g&wl2=m&wl3=501107745824&wl4=pla-306310554666&wl5=9014329&wl6=&wl7=&wl8=&wl9=pla&wl10=8175035&wl11=local&wl12=1527534896&wl13=720&veh=sem_LIA&gclsrc=aw.ds&&adid=222222222381527534896_117755028669_12420145346&wl0=&wl1=g&wl2=m&wl3=501107745824&wl4=pla-306310554666&wl5=9014329&wl6=&wl7=&wl8=&wl9=pla&wl10=8175035&wl11=local&wl12=1527534896&veh=sem&gad_source=1&gclid=CjwKCAjw_LOwBhBFEiwAmSEQAbhRxJCWytw7sOJ_Ino6vRTo5uKyZ0_KoAEl53ynXfNBS5w5_sjewhoCkTwQAvD_BwE

    • @Kukkema
      @Kukkema 6 месяцев назад +1

      @@tee-jaythestereo-bargainph2120 thanks Tee-Jay, appreciate your help

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  6 месяцев назад +1

      @@Kukkema that's what I am here for !

  • @chrishmeet
    @chrishmeet 9 месяцев назад +1

    For shits and giggles, I hooked up my tube pre amp to the power mode off the 6000a , and you wouldn't believe how much better it was.

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад

      Heck yeah man !! I do the same with Freya plus - That's great !!

    • @VictorEnnis-n1w
      @VictorEnnis-n1w 9 месяцев назад

      If I may ask. What tube preamp do you have? I have a 6000a with klh model 5’s and was debating to try the same thing just to see what it would give me. Thank you.

    • @chrishmeet
      @chrishmeet 9 месяцев назад +1

      I'm using the purity audio foundation preamp, 6922 tube. I'm also running the kef LS50 and I couldn't believe it, where the 6000a struggled as a intergrated, by adding a separate preamp the kefs opened up to their potential even with 50watts per channel.

    • @chrishmeet
      @chrishmeet 9 месяцев назад

      @@VictorEnnis-n1w I forgot to tag you. Sorry.

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад +1

      @chrishmeet most likely has a higher gain output with Preamp I use 6922 also JJ gold pin that's good to know because my 6000a struggles with my metas espically in my bigger room

  • @kaybhee6
    @kaybhee6 9 месяцев назад +1

    kewl... accurate

  • @immanuelsuresh7739
    @immanuelsuresh7739 9 месяцев назад +1

    Is the 6000a a good match for q3050i speakers?

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад

      Str8 up I don't know if 6000a could drive them fully ! I would have to look up the specs ' I wouldn't pair up a speaker that's below 89db with 6000a or speakers that drop below 4 ohms hope that helps 6000a is best used with very efficant speakers like Klispch/Zu/Tecktons 👍

    • @immanuelsuresh7739
      @immanuelsuresh7739 9 месяцев назад

      @@tee-jaythestereo-bargainph2120 q3050i is rated at 91db, my worry is it's not a forward sounding speaker like Klipsch it's a kind of laid-back sounding speaker.

  • @jimashby43
    @jimashby43 9 месяцев назад +1

    Man that was good.

  • @christophergaus3996
    @christophergaus3996 9 месяцев назад +1

    Def Leppard!!! 🤘🤘🤘

  • @0oOstefanOo0
    @0oOstefanOo0 Месяц назад +1

    Would this be any good for KEF R3 metas?

  • @thomasstanfel7589
    @thomasstanfel7589 9 месяцев назад +1

    Outstanding..deep dive Tee-Jay!!!!!

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад +1

      Thanks Thomas ' 4k 😃

    • @thomasstanfel7589
      @thomasstanfel7589 9 месяцев назад

      @@tee-jaythestereo-bargainph2120 dude the picture quality and sound is phenomenal

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад +1

      @thomasstanfel7589 Thank you bro we came a long ways ! Also thinking about upgrading in a few months to an even better 8k Camera
      😆

    • @thomasstanfel7589
      @thomasstanfel7589 9 месяцев назад

      @@tee-jaythestereo-bargainph2120 dude that would be cool

  • @bengleason508
    @bengleason508 9 месяцев назад +1

    Welcome back TJ!

  • @janulik9535
    @janulik9535 9 месяцев назад +1

    me, love usb b too, kind of do not like usb c :)

  • @ramongomez6720
    @ramongomez6720 9 месяцев назад +1

    What's going on Tj, can't wait for your GR crossover upgrade to your Polk speakers

  • @tomdebeck8150
    @tomdebeck8150 3 месяца назад +1

    The silver caps are Panasonic NHG elco's

  • @GreenHoleSun
    @GreenHoleSun 2 месяца назад +1

    I like this new offering by audiolab very much, unfortunately they have no tone control and no loudness for listening at low volume...I will stay with yamaha on this department.

  • @Reinh4
    @Reinh4 2 месяца назад

    To be honest I don't like amplifiers that only can be paired with certain efficient speakers. A really good amp that deserves the name can control (nearly) every speaker. The others simply are "loudmakers" but no amplifiers. Imagine you want to change your speakers with 90dB and switch to lets say DYANUDIO with 85dB but with a superb sound you love. Result is you also have to sell your "weak" amplifier. So a good start in a decent hifi system is an amplifier as kind of control center that will stay and drive any spaeker you offer him. Just my five cent to this. 🙂

  • @pistopit7142
    @pistopit7142 7 месяцев назад +1

    7000A or Yamaha R-N800A for KEF R3 Meta?

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  7 месяцев назад +1

      Bro you better go Audiolab !!
      Zero-Fidelity will back me up !!!
      Thay Yamaha is to bright for those
      Speakers I love Yamaha but it's a
      Picky amp !
      I have 3 sets of Kefs trust me !
      But honestly 9000a would be your best for drive power but you have option if i was you i would by the New Marantz 50 2channel integrated amp that took the place of the Pm8006 the synergy with Kef/Marantz is very good also but Marantz puts in a hefty 625va toridal transformer for drive power !! Go with new Marantz 50 2 ch intg amp !

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  7 месяцев назад +1

      You will thank me !! But Marantz doesn't have built in dac 7000a is very good but r3 meta if you listen loud love power Marantz 50 can draw 65amps of power instantly !
      It's a solid amp ! But 7000a is good also ' but I think Marantz does it better as far as drivel power and imaging

    • @pistopit7142
      @pistopit7142 7 месяцев назад

      @ythestereo-bargainph2120 Thanks dude. That is a lot of info for me to digest. Guess I need to do more research.
      The choice is obviously dictated by my budget.
      The reason why I was considering Yamaha R-N800A is because it has a built in streamer and I read that it has more than enough power to drive Meta 3s.
      You did say that Yamaha amp sounds to bright for Mata 3s. My plan was to actually use Yamaha for the power aspect only but bypass its DAC by connecting Chord Mojo 2 with RCA cable to analog input in Yamaha amp. This way I thought I will have class A DAC from Chord Mojo 2, combined with the power of Class AB amp from Yamaha. Would be good to know what you think in case I am just bulshiting myself with this idea. Once again many thanks for all the valuable info.

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  7 месяцев назад

      @pistopit7142 I see some problems there when you use the Yammies built in streamer its connected to the internal dac of Yammie ' you will not be able to run digital stream output to your dac and then back into the yammie analog inputs ? Let me look up that Yamaha cause I do believe built in streamer uses built in dac ? Just went threw this a few months ago with the Audiolab Omnia !! The built in streamer is tied to internal dac one guy thanked me a million times for letting him know lol or maybe you use another digital transport to your Chord dac then to yammie just want you to beware of streamer/internal dac only ' Hope the hell I didn't confuse ya
      Karta.boy.1974@gmail.com
      My email ' I know it's nice having
      All built into one ' but built in dac on yammie might sound great with your setup '

    • @pistopit7142
      @pistopit7142 7 месяцев назад +1

      @ythestereo-bargainph2120 many thanks. That is a briliant point I've not thought of. So if I use Yamaha streamer then I will likely be forced to use bult in DAC. That makes a lot of sense.
      In the setup with Chord Mojo I was describing earlier I was planning to have Chord Mojo connected to my PC with usb-c cable so I would be streaming from my PC rather than Yamaha. I think in such setup I would be able to bypoass built in Yamaha DAC.
      So I guess I would need to use both DACs depending on my source of streaming. If I understand all this correctly, then I think that Yamaha amp is still a pretty solid deal. On many forums I see people prising Yamaha for it's neutral sound, I don't know how much I can believe it. It's really hard in audio world to make an informed decission, there are so many often contradicting opinions. This is especially hard for a newbie like me who is currently rocking old and loved Klipsch R41-PM with Chord Mojo 2 in the loop. One thing I can tell for sure is that whatever I upgrade to Chord Mojo stays in the loop. It has added so much live into my old crappy speakers.

  • @r423sdex
    @r423sdex 8 месяцев назад +1

    Where is the transformer made ?

  • @jackturtle131
    @jackturtle131 9 месяцев назад +1

    I was so disappointed with the 6000 A that I bought a Denon amp again So much warmer sound ( what I really like )

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад

      I have the Denon PMA 1700 in for review 😆 Beast !! High current mosphete amp ! And your correct warm n robust ! Powerhouse !

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад

      What speakers did you have paired with 6000a ?

    • @majtextwriter1794
      @majtextwriter1794 9 месяцев назад +1

      @@tee-jaythestereo-bargainph2120 My friend obviously did not watch your video and paired 6000A with Wharfdale 4.1., because some other reviewers said, it is a good match. But it is not!! It even does not open up 4.1's sound, it's sound stage and over 3/4 of volume gets very distorted when finaly some sound presentation (from total laying back) comes out in the room. With more sensitive speakers it sounded overall quite good and nice. For such small power hungry speakers (also Elac's) is not a good match. It is not a Hegel.

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад +1

      @majtextwriter1794 You know I caught grief from some people for saying to only use efficant speakers with 6000a ! One was a utuber reviewer ! These people said ohh 50 watts is enough power I said it's not how many watts that matters but the quality of watts is 'watt' matters 😆 lol If you want that full body Sound and Bass control you need HEADROOM yeah Hegals are no joke high Slew Rate and damping factor matters !

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад +1

      I agree Elacs do not sound good with 6000a ! I mentioned this before also with UB52 review those speakers loved power ! But once you feed them they did get busy at the very end of my Elac review I had my 52 pound intg driving them fully Go check it out if you have time '

  • @SD-ym5jo
    @SD-ym5jo 9 месяцев назад +1

    I completely agree that this is an absolutely fantastic amplifier, but claiming it's so much better than the 6000a seems a bit off to me. I've tested both, and even though the 7000a is slightly better in certain aspects, the difference is so minimal that you have to concentrate to notice it clearly. When playing these two at low to normal volume levels, there's practically no discernible difference. The 7000a plays a bit louder, but apart from that, there's very little distinction, certainly not enough to justify the price compared to the 6000a. I strongly doubt that one could hear a significant difference between these two in a blind test. That being said, this only proves how exceptionally good the 6000a truly is. You won't notice "significant" changes until you reach the top model, and even then, it's not a night and day difference.

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад +2

      I tested both Integrateds with my switchbox in real time , Like I said in tthe video all 6 audiolab amps all have that same Tonality ,The British sound natural relaxed and Mature Sounding ' But in analog mode the 7000a has more Headroom and drives my harder to drive speakers
      More effortlessly bass attack/Dynamic Range 'headroom .
      But in terms of performace with using built in dac 7000a is levels above 6000a - And we can decode DSD/MQA and Higher Rez PCM the 7000a built in dac is outstanding even competing with my Higher end outboard dacs !
      Even the British Audiophile said built in dac is better than his Denafrips of course being paired up to the Audiolab ' having USB/HDMI is a huge improvement over toslink Coax which gives 7000a advantage '
      I talked this morning to Lead Engeener of Audiolab Jan Erthner and he confirmed many tweaks went into 7000a espically the built in dac '
      Even the B.T 5.0 Apt X LL is better than 6000a - But like I said many times in video So is the pricepoint your right on with that I agree'
      I have 2 listing rooms One Nearfield you see in Video that's lightly acoustically treated and my entertainment Room medium sized that is highly treated with 16 panels 8 diffusers and ceiling cloud panel '
      I spent over 6 months with 7000a and 4 years with 6000a ' and 6000a does sound more lean ' happy new year

    • @SD-ym5jo
      @SD-ym5jo 9 месяцев назад +2

      @@tee-jaythestereo-bargainph2120 I completely agree with everything you're saying; it's just that there wasn't such a significant difference in my ears. In terms of price and sound quality, the gap wasn't as clear to me. Granted, the 7000a has many other qualities, such as HDMI, but for me, who doesn't need that, it wasn't "enough" to justify the high price. The 7000a is undoubtedly an upgrade, but is it worth the price in terms of sound compared to the 6000a? I wouldn't say so. That being said, it's still an amazing product that outperforms many amplifiers in a much higher price range. Enyway, Happy new year and keep the videos coming, you are doing great 👍

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад +1

      @SD-ym5jo I get where Your coming from 💯 and the 6000a is a sweetheart at pricepoint and has lasted me 4 years with no problems
      If I based on percentage I'd give 7000a about 7-10 percent performace gap with dac vs dac
      Analog domain maybe 5 percent
      I should have mentioned this !
      Happy new year '

  • @florin73mm
    @florin73mm 7 месяцев назад +1

    ruclips.net/video/QU39lXdAyiU/видео.html That's the stand-by circuit, dude! :))

  • @kaybhee6
    @kaybhee6 9 месяцев назад +2

    4 output transistors,,, is one of them ,,15c or 25f .. higher temp.. than other 3,,, pls measure,,, try this test no inputs,, no outputs,, vol at min.. leave it on,, for 1 hour,, dude,,, note on 6000a all 4 are about same temp,,,

  • @Gadgetdad007
    @Gadgetdad007 9 месяцев назад +1

    You should have purchased the 9000A. 😢

    • @tee-jaythestereo-bargainph2120
      @tee-jaythestereo-bargainph2120  9 месяцев назад +1

      I didn't purchase any audiolab amps ' U.S. distributor sent to me on a loan a do have 9000cdt is pretty good but yeah 9000a another level than 7000a !

  • @Carl-yx1ww
    @Carl-yx1ww 4 месяца назад

    Dude where 9000a