For those asking about the motor removal you have to get at it from the other side. There are 2 screws and a belt on the opposite side remove. Easiest to watch a video how to remove the entire drive and connect the dots that way.
Hi there! I got a Ps4 Slim CHU-2116B No disk feed aswell but I did check the fuses and they are all fine, I'm checking BRD parts are good (no stuck all parts working well), and tiggers on smal motherboard are good they works fin continuity when actives but theres something with motor.. It shows 8~9 Ohm but it has continuity on their pins
Can someone help me. My ps4 1215a doesn’t have no power when I try to put a disc in but when I shove a disc in and press the eject button it works. Also when I put a disc in when it’s off it doesn’t turn on. I also have 1 trigger missing on the insert eject sensor. Please help
@@m6kteatube in my ps4 the sensor pins are broken and i think maybe that is the problem i want to change the KLD 004 because the ps4 dont react when i put cd
can the kld replacement be found inside the original ps4 or ps3 and/or ps3 slim? I'm having this problem but I have another ps4 and two ps3's sitting around.
well i wish that was my problem but like i said in the last comment the little triggers are there so i have no idea what it could be but the same thing is happening it takes the disk but doesnt read it
Hi , I'm having no disc feed activity when I try inserting but the drive is reading discs manually inserted. Those this mean I should replace that sensor board? The plastic sensors look OK on mine. Does the fact that the drive still plays cds mean its not a motherboard fuse problem? Thanks
i have a ps4 slim with same problem. its not getting any power. but all the triggers are still on the board. would that still cause no power to blu ray lens and the motor?
the ps4 will also not recognise that ther is a BluRay discdrive, and therefore can not update. It gives you the Code (cant remember it) that it can not find a diskdrive
Hmmmm .....i godda check that out ty i wonder how much it cost mine not doing anything either and thats error code su-1184-6 i think ill check and update if not its the fuse everything looks good and new and the disk button works but nothing else turn on perfect as well
Nice video, i have 2 ps4 pros, replaced F6202 fuses nut BD Rom drives take a disc 1 time but never seats it, eject works all the time. Replaced both sensors and motor, cant see any other issues, i guess both drives need fully replacing, all other mobo fuses have continuity unless the Motor IC is the issue but not sure how to test that....
Not sure if you got an answer to this but you have to remove the entire disc drive. The motor has a rubber band belt and 2 screws holding it in place. It's easiest to watch a disassembly video to remove the disc drive and connect the dots for this but you have to get at the motor from the bottom if you can't solder like this instruction.
For those asking about the motor removal you have to get at it from the other side. There are 2 screws and a belt on the opposite side remove. Easiest to watch a video how to remove the entire drive and connect the dots that way.
Got my sub. Without this video I would never have tracked down the issue. I'm going for a full motor replace vs a solder job but all the same, thanks!
Such a good video! Thanks pal
My switches are still on but it won’t pull the disc in what do i do?
Hi there! I got a Ps4 Slim CHU-2116B No disk feed aswell but I did check the fuses and they are all fine, I'm checking BRD parts are good (no stuck all parts working well), and tiggers on smal motherboard are good they works fin continuity when actives but theres something with motor.. It shows 8~9 Ohm but it has continuity on their pins
im having this same issue but the little flipper things are attatched
Great tutorial. But its does require quite an extensive electrical skills. Therefore, I rather send my PS4 for repairs. Thanks again !
Can someone help me. My ps4 1215a doesn’t have no power when I try to put a disc in but when I shove a disc in and press the eject button it works. Also when I put a disc in when it’s off it doesn’t turn on. I also have 1 trigger missing on the insert eject sensor. Please help
Hello do you i think that it’s possible that linked with the error su-42118-6
yes it is
hey did you ever get it fixed
@@m6kteatube Are you sure i have the same error I cant update my console
@@CrazyAce265 the issues because of that error two of my ps4 slims are bricked…
cannot find any solutions apart from soldering
@@m6kteatube in my ps4 the sensor pins are broken and i think maybe that is the problem i want to change the KLD 004 because the ps4 dont react when i put cd
can the kld replacement be found inside the original ps4 or ps3 and/or ps3 slim? I'm having this problem but I have another ps4 and two ps3's sitting around.
Good afternoon, please tell me where you can buy or find such a spare part.
How can you get those parts to buy I have the same problem with my game
well i wish that was my problem but like i said in the last comment the little triggers are there so i have no idea what it could be but the same thing is happening it takes the disk but doesnt read it
Hi , I'm having no disc feed activity when I try inserting but the drive is reading discs manually inserted.
Those this mean I should replace that sensor board? The plastic sensors look OK on mine.
Does the fact that the drive still plays cds mean its not a motherboard fuse problem?
Thanks
Possibly a fuse as well.
Hello bro do you think it’s possible that linked with the error
Im missing that lonely pin of underneath, guess I have to replace it, thanks 👍🏻
hello the switches are l or r?
My Playstation slim 4 isn't reading the disc this all you would have to replace the sensors are damaged someone told me
Depends on the full issue. Disk not reading is not the SENSOR board but the laser
I have problème in may lecture drive disk feed 2216a
one of the triggers on my sensor are broken
i have a ps4 slim with same problem. its not getting any power. but all the triggers are still on the board. would that still cause no power to blu ray lens and the motor?
The drive motor ic chip might be the issue if not the fuses or disc arm sensors.
Its ok to change woth another switch board ? Its not married with tge ps4 board ? Or its not like phat ps4?
Just switch the board with a new drive.
The disc sensor arm board is not married so it is ok to switch.
the ps4 will also not recognise that ther is a BluRay discdrive, and therefore can not update. It gives you the Code (cant remember it) that it can not find a diskdrive
Usually it's one of four fuses that blow on the drive board
Hmmmm .....i godda check that out ty i wonder how much it cost mine not doing anything either and thats error code su-1184-6 i think ill check and update if not its the fuse everything looks good and new and the disk button works but nothing else turn on perfect as well
Whats that repacement called
Kld 004
Nice video, i have 2 ps4 pros, replaced F6202 fuses nut BD Rom drives take a disc 1 time but never seats it, eject works all the time. Replaced both sensors and motor, cant see any other issues, i guess both drives need fully replacing, all other mobo fuses have continuity unless the Motor IC is the issue but not sure how to test that....
Can't test that sometimes you just need to switch it. When theres a blown fuse often a chip or other component is blown as well
1. save hard drive
2. vent and destroy your ps4
3. buy another ps4
4. insert hard drive
5. you can play games again
How do you take the motherboard and motor out?
Not sure if you got an answer to this but you have to remove the entire disc drive. The motor has a rubber band belt and 2 screws holding it in place. It's easiest to watch a disassembly video to remove the disc drive and connect the dots for this but you have to get at the motor from the bottom if you can't solder like this instruction.
Gracias si funciona
Help me pls
at last, my problem is the same.
jfc just get another ps4 if this is the real problem