From the 'network view' right click on the logo. This brings up a new window 'Offline and online settings. Click on 'Offline settings'. Go down the list to 'I/O settings' and click on this. You now have the option of 'Onboard AI settings'. Selection 2 (Enable 2 AIs), click this option, Select which type you want, 0-10V or 4-20mA. now press 'OK' at bottom right screen. Input terminals I7 and I8 are now Analogue inputs.
Yes, simple off the shelf parts, just pug into the logo. However, logo do come with analogue inputs, but you loose a digital input for each one you configure to Analogue
Hi, I wanted to comment the exact same thing. I'm working with brits for 20 years now but this is a top 3 contender for being hard to understand. A bit slower and clearer please because the vid is very interesting!
![KAYTRANADA - Witchy (feat. Childish Gambino) [Official Video]](http://i.ytimg.com/vi/jGK3YVmGZ3Y/mqdefault.jpg)
Thank you
Good vid. Why there is no LOGO TDE in network view~ 5:04 ?
What solution of spi test ok on ?
What meaning spi test ok??
Could u explain how to connect proximity sensor with logo ?
Can I use digital input I7 and I8 as an analog input. If yes than please make a video on it.
From the 'network view' right click on the logo.
This brings up a new window 'Offline and online settings.
Click on 'Offline settings'.
Go down the list to 'I/O settings' and click on this.
You now have the option of 'Onboard AI settings'.
Selection 2 (Enable 2 AIs), click this option, Select which type you want, 0-10V or 4-20mA.
now press 'OK' at bottom right screen.
Input terminals I7 and I8 are now Analogue inputs.
can I added analog module in logo plc?
Yes, simple off the shelf parts, just pug into the logo. However, logo do come with analogue inputs, but you loose a digital input for each one you configure to Analogue
it doesnt let me connect with the logo for some reason, i put in the same ip adress
and network cable is also connected to the logo
Its usually to do with subnet. Make sure your laptop IP address firs 3 group numbers are the same as LOGO.
Quando fai i tuoi tutorial ,devi parlare più lentamente , perché è difficile seguire e capire . Grazie
Hi, I wanted to comment the exact same thing. I'm working with brits for 20 years now but this is a top 3 contender for being hard to understand. A bit slower and clearer please because the vid is very interesting!