White Toner Webinar 5-2019 Ghost and UniNet printers.
HTML-код
- Опубликовано: 3 июн 2019
- White Toner Webinar From 5 - 2019 from a while back that I did when I was on the sales team.
In this video, I briefly cover each of the White toner systems that USCutter offered at the time.
The iColor 550 and iColor 600 are the UniNet printers shown as well as both the Classic rip software as well as the Pro-Rip Software.
The process with using the Ghost white toner is pretty much the same for any printer it works with, but I have examples with the M452DW printer in this video and use our Vinyl Master software to create and adjust the white underfilling layer of the image.
This is just my personal account and this video is not sponsored by USCutter.com
You can find the official USCutter.com RUclips account here. / uscuttervideos 
Хобби
Very informative Thank you!!
Thanks for the great video! I got a question - Is it possible to print the white underbase on the shirt first and with another paper the colour? (toner over toner) would be great if you let me know
Witch edition of this software do I need to achieve this?
1.letter edition
2. professional edition
3.basic edition
Is there a way to print the white layer 100% accurately on top of the color layer?
The second output does not have a fine fit.
I have a question about the software you are using, does it have to be the DSR version or can the Vinilymaster Cut be used?
Is this good for sublimation such as on cups etc?
Hello! are the CMYK toners that come with the printer special toner as well or are they normal paper printing toner? its just hard to believe that they would go on shirts and get washed. thanks
Ca you show usage of canon 622 w ghost and different papers, is it the same as hp?
Does the printer print 2 times forever multi trans paper? I tried many times it gets stuck a second time and the printer does not petat the second time this forever multi trans paper
Is it better to use a laser printer or sublimation printer?
Can I use any cheap laser printer and replace it black with a white toner in order to do "2-Step Heat Transfer Printing | Full-Color Design On Cotton T-Shirt" ?
DOES THE HP Colour LaserJet Pro M254nw WORK WITH GHOST TONER. PLEASE REPLY.
This is just an upload of an old webinar I hosted a while back
Hello Josh i really love this webinar.
Can you tell me what paper do you use for the HP452NW for transfer to a garment surface (like t-shirt).
Yes the NW works just fine with DW cartridge. The DW just has a fancy touchscreen and can print on 2 sides. (not really needed for transfer printing)
Where can I buy that printer with white toner????
Doesn’t work in 2023 version or Corel? Any ideas?
So, finally, please tell me, forever laser dark is it good for ghost primer or not?thanks a lot
I use the Forever laser dark in almost every video I've made. I also bring Forever laser dark with me to trade shows and demos for Ghost. I switch between that and the UniNet Premium paper for pretty much everything.
Such a way as in your webinar to glue two sheets of multi trans forever and a simple sheet together, my printer does not want to re-print multi trans paper, even with gluing the second sheet from the bottom
Multi Trans is a very waxy paper. If you are looking to do hard surface transfers with the Ghost toner you are going to need a paper that won't curl as much and isn't covered in a waxy release liner that will jam your printer. Versa-Sheen or Paropy Hard surface. Versa-sheen is my new #1 for toner hard surface transfers.
Hi Josh, Do you need the vinylmaster dsr software or will the basic software work for contour cutting ?
You can contour cut with every version of Vinylmaster
how many shirt prints can you get from a 299 dollar white toner? (and thank you for the content!)
hi Josh, I am a new newbie in this. I've been watching David over at Ghost for months and finally purchased my little ghost, heat press & mug press. Well, what I thought was gonna happen is not happening. By the way his videos are, I thought I was coming in, plugging in & printing!! Ummm not. But at this moment, I need to know what settings to put my mug press on but I can't find it anywhere, or I'm looking for the wrong thing. I have the white toner (not sublimation) a white ceramic mug, and I want to print it. What are the settings for this please?? Heat setting & time. thanx so much...Wendy
It really depends on what type of paper you are using. I have not had time to make a video on the Versa Sheen hard surface paper that just came out a few months ago, but it works great with Ghost and also leaves a nice gloss finish over the mug. It is now my favorite hard surface paper to use with laser transfer.
Hi Josh, is there a reason why my black ink (white toner printer) printed one my white mugs doesn't stay on the mug?? It rubs off. I thought it was supposed to be a great way to print on mugs. Thanx
You are just melting the toner onto the face of the mug so it won't have the same durability as sublimation. VersaSheen hard surface papers will give you the longest lasting results on ceramics and metals because the release liner acts as a protective coating that increases the durability of the transfer.
trying to get the 8x11 printer is it good
I have the M452DW and just got the M254 in for testing. So far so good!
Josh's Corner what white toner is compatible with the m254 model?
Greg Witte which brand white toner is compatible with the m254 model?
Great video. This is a question from a novice. Can the the cups,mugs plates, glass be microwaved and or dishwasher
When you are using laser toner transfer paper for hard surfaces we are just baking the toner on the top of the mug. If you are using the Paropy Hard surface you can put the mug in the oven for a bit at 400°f to bake it and increase the durability. My Nazzcar mug I didn't use the VLR on from the other hard surface video earlier this year is still going strong at 9 months later and 30+ washes.
Thank you for the reply
What is the type of paper you used and you used just the ghost white toner or I need to buy the cyan, magenta, yellow and black ghost toners for sublimation?
ghost white toner.com sells sublime for sublimation for this printer
In these videos I used Paropy Hard Surface paper and then for the clothing I used Forever Laser Dark
Which white toner I must buy for the hp254 printer that you shown on this video? TIA
Whats the most cost effective way to get started with this? We own a boutique and currently are doing sublimation. We need a way to do white on dark shirts.
We have a Sawgrass 400 and a cricut right now. Wanting to do more and less work as far as weeding.
@@deirdreholcombe8738 I'm looking into Flex Soft No Cut, I don't want to weed out 100 shirts myself. Check them out
Nappily Rooted thank you! I’ll check it out! ❤️
The Ghost white toner system is the most cost-effective, but has a steeper learning curve because you have to work around the limitations of the two-pass print for CMYK&WH and no product specific software. I tell everyone who is looking to purchase something for their business to look at the UniNet iColor printers if they are going to get something for their business. That is a machine that has been designed from the ground up to print white toner and comes with software and everything needed to make it easier to start profiting with.
@@deirdreholcombe8738 Flex soft is pretty nice. You can use that with a monochrome laser printer and make some very nice designs.
i always get bad pixelation around the edges of every image i print, would the software im using have anything to do with this. all the designs are high quality (pixel size whys) most of the items we print the design comes from the client or a company thy hired to make the image.
The picture can be high resolution and still be blurry or pixelated if it wasn't resized correctly. You may want to start requesting a specific file type like a vector image or something that will allow you to resize the image with ease.
How can I get this program for my printer? Im getting gray color
www.uscutter.com/VinylMaster
Can I do the same with OKI C532DN?
Can you print up A3 or A4?
Great video and thanks for sharing!
Just thought I’d share some personal experience with using a ghost printer and forever multi-trans paper. Multi trans paper has not yet given me any issues with jamming because the paper is too waxy?!
However, I cannot comment on the performance of papory paper but it seems there isn’t only a single solution transfer paper on the market. Again, great video and no disrespect for sharing your process with us.
FOREVER MULTI TRANS PAPER*
@@kieranrmartin That is great to hear! What type of printer are you using? I can get a single pass design through without issue, my trouble comes when I have to run the FMT through for the second time on a CMYK and WH image when using the M452DW, 452DN, CP5225, and M254DW. The waxy film of the paper combined with the curling from the first run through made it impossible for me to get a transfer through more than a 3rd of the way through before it would jam. I was able to find a work around taping it to a sheet of construction paper to hold it flat, but I was still having jams. I do still have to use this method with the Paropy Hard surface for CMYK & WH images with ghost, but in my experience it has a much higher success rate with these cheap printers than the FMT.
Also, thank you very much for watching my video and sharing your knowledge with me. I do appreciate it very much!
Hello, there is some way to buy the white cartridge to ship to Spain
Just order it from Ghost directly. They are located in Germany
@@JoshsCorner Thank you!!!
What is the type of paper for hard surfaces?
forever multi trans paper works good for Glass, Ceramic, porcelain items as well as wood. forever laser dark will work on wood as well but not as good as the multi trans paper
If you are using the Ghost printers you will want to use the Paropy Hard surface paper. The Forever Multi-Trans is also great, but it is too waxy and will jam up inside the cheap HP printers.
Hi bro, can you training me?
Does the 454dw works too ?
The 454dw does not currently have a chip that can be used for toner cartridges. HP is keeping that tech under lock and key so they can make as much money as possible in toner sales.
@@JoshsCorner thank you 🙏🏼 I’m actually also looking to get the 254dw
Hello friend
𝑨𝒚𝒐𝒐𝒐𝒐𝒐 𝒉𝒆𝒔 𝒕𝒂𝒌𝒊𝒏 𝒂 𝒑𝒐𝒐𝒐
Very insightful!
1v1 on Minecraft? If I win I get an avocato shirt if you win I’ll give you a stack of diamonds. Do we have a deal?
Why do people put so much time into creating a video then have music playing when they are talking. Cmon whoever is editing why would you have the music playing at the same volume as the voice or at all. I don’t even understand the purpose for that.
This is the first US Cutter Video I have watched on the White Toner. I gave up 1/4 way through due to the music and not being able to understand what is being said... The music is competing with the Ringing in my ears... Too bad... I bought my Vinyl Cutter from US Cutter many years ago and I am shopping for white toner... Bummer... Can the music... That is my 2 cents. Honestly you have lost a sale letting the kids add electronic music.
This is my personal RUclips channel so you are going to see me progress and learn when you go back and look at my early videos. They are pretty rough and I can't watch them without cringing and totally agree with you on all these things. The USCutter RUclips account can be found here - ruclips.net/user/uscuttervideos