Gas Only ya it is. My 120 got really bad ick and my biocube did not even though I had fish in the 120 that I moved to biocube so I credit that to Uv. I recommend it!
I just bought the same wave maker. What setting are you running your wave maker, I would like to get a better idea on how I should set mine. Speed, mode, etc. Thanks.
I run the brs recommended percentages for the light. UV and violet both 100%. Royal and blue are both 80%. Green is 6% and red is 4%. I have my whites lower then recommended at around 10% buts brs recommended whites at 20%. Hopefully this helps you out! If not, you can look up brs ai prime recommended light settings on google, and go to photos
@@himmat_dhillon thanks for answering whatever you using that's so cool I have mwl-20 jebao it's too difficult for adjusting include my tank Dimensions anyway thanks for responding
@@himmat_dhillon The yellow Corse Wrasse and the firefish are both jumpers, They get spooked quickly and both jump I wouldn't be surprised if you don't find them on the floor one day running an open tank ..Good luck
Barry Little thank you for the advice! I know that they need a lid. I had a glass top but I take it off for vids. I tore the tank down to focus on my main tank. I have a screen too on it. Thank you for the look out❤️
If anyone can help me figure out what I’m doing wrong but mine is growing so much algae no matter the water changes or what it’s been going crazy hahah
Have you checked the phosphates and nitrates? Phosphates are recommended to be at .03 to .07 and nitrate should be at 5 to 10. If you test and they seem fine then there might just be too much light. What light are u using? How old is ur tank? Lmk how that goes!
Thank you! It seemed to be just a flare up randomly! I got a 29 bio cube that I’m transferring everything into. Is there a good place to buy torch and hammer corals? I’ve bought from world wide corals and they are kinda pricey
first reef in the biocube ive seen on here that is actually nice! good work!
Simple set up like mine ultra low maintenance more or less thanks for the video your tank is looking great.
You could also just used a hot blade to cut through the plastic, that way you don't have to worry about cutting the glass.😃
# reviews true!
Used my de Walt heat gun with a blade ty!
That rimless mod is amazing. Bravo
Fav video/tank since i have a biocube myself 👌🏼
Francisco Tijerina appreciate it!
Awesome tank! Keep up the good work!
Great video! Thought you should know ick can travel through the air up to 10 feet so I’d get your beautiful tank further away. Good luck
Beautiful
love the content Himmat keep up the great work!!!
😎💯👍🏾🔥….nice tank
Super
What uv sterilizer is that?
That the coralife uv sterilizer made for the biocube? Thinking about getting one have dinos bad
Gas Only ya it is. My 120 got really bad ick and my biocube did not even though I had fish in the 120 that I moved to biocube so I credit that to Uv. I recommend it!
I just bought the same wave maker. What setting are you running your wave maker, I would like to get a better idea on how I should set mine. Speed, mode, etc. Thanks.
Sorry just saw this. I am using the pulse mode on the 7th level👍
What intensity are you using
Did you do the rimless mod with or without water? Silly question probably lol
What brand and model uv sterilizer do you have?
i don’t remember but i think it was one made specifically for the biocube
How can I get that light so cheap? Nice set up dude
Ruben Falcon 2nd Hand. Offerup, or a Facebook group will have 1 at least
Hey bro I have the same
Light. What settings are you running as far as percentages for each light
I run the brs recommended percentages for the light. UV and violet both 100%. Royal and blue are both 80%. Green is 6% and red is 4%. I have my whites lower then recommended at around 10% buts brs recommended whites at 20%. Hopefully this helps you out! If not, you can look up brs ai prime recommended light settings on google, and go to photos
Curry Corals thank you!
Hello what mode wave maker you using on this video I mean c or w1?
@@kiogh5295 I believe w1. Been a long time since I used it haha
@@himmat_dhillon thanks for answering whatever you using that's so cool I have mwl-20 jebao it's too difficult for adjusting include my tank Dimensions anyway thanks for responding
Which mounting arm for light 12 or 18 inch?
Reef BLerd 18 I believe
Great video, nice tank
Thanks 👍
@@himmat_dhillon The yellow Corse Wrasse and the firefish are both jumpers, They get spooked quickly and both jump I wouldn't be surprised if you don't find them on the floor one day running an open tank ..Good luck
Barry Little thank you for the advice! I know that they need a lid. I had a glass top but I take it off for vids. I tore the tank down to focus on my main tank. I have a screen too on it. Thank you for the look out❤️
Dude- why the loud music playing while you talk? Can barely hear you!
Will these upgrades work for oceanic biocube29?
What UV you run on that?
Like your weeping willow where did you get it?
The one in the front? That’s a torch
@@himmat_dhillon what kind of torch?
Some kind of no name ausi. Very cool torch
I just call it a teal tip ausi but who knows
Are you using the coralife mini uv sterilizer? How often do you turn it on?
Eddy Rajiah I had it on all the time. I never had a problem with Dino or ick.
If anyone can help me figure out what I’m doing wrong but mine is growing so much algae no matter the water changes or what it’s been going crazy hahah
Have you checked the phosphates and nitrates? Phosphates are recommended to be at .03 to .07 and nitrate should be at 5 to 10. If you test and they seem fine then there might just be too much light. What light are u using? How old is ur tank? Lmk how that goes!
Thank you! It seemed to be just a flare up randomly! I got a 29 bio cube that I’m transferring everything into. Is there a good place to buy torch and hammer corals? I’ve bought from world wide corals and they are kinda pricey