I have this. Some tips. First, installing without the base. The wheels only need to be used underneath if it isn’t level. They act as the leveler. The strap can go one of two ways. The lap strap only over baby's lap, or that with the shoulder strap behind baby. Second the base can be used without the wheel covers if space in the back seat is a issue Third, there are little pockets on both sides to put the lap clips into. They will hold the straps out of the way when putting baby in the seat. Fourth the cupholder has to be clipped on in a specific way on either side. There is a notch in the clip and a hole on either side of the push bar on the top of the black portion. You have to put the notch in the hole or it will come off with any weight
This is one of the best best video review ever. You saved me a whole day with only 22 mins long video. I have never left any comments before but this is an exception!!! Thanks a lot! 🙏🙏🙏
When I try to remove the car seat only from the base in the car it’s not working, is there a specific step to do before , to remove it without the wheels in the car?
Make sure the seat+stroller is properly seated into the base. Then use the top white/gray handle on the back of the seat to remove just the car seat without base. You cannot remove seat from wheels when the entire thing is not on base, properly locked.
I can’t get mine to come apart from the wheels even when it’s on the base. Is there a super secret way to get this feature to work? The video makes it seem so easy and simple but I’ve been struggling for 4 months.
This thing is so difficult to fold the wheel. I got it in Black Friday discount for $389.99 + tax and thinking of returning it. Didn't even used it once.
Can you disconnect the car seat alone with the top lever, put it down on the ground, then disconnect the wheels with the bottom lever and then reconnect them on the sidewalk? Also, any thoughts on how this drives compared to the Doona's bigger wheels (specifically on uneven sidewalks)?
No. Only the combination can be removed together. We used it on cobblestones, it’s not great, but I doing have a Doona to compare, but I bet bigger wheels would help
@@ViratPatelYT Interesting, because the whole reason I wanted this one was so that when the baby gets too heavy I can disconnect the seat and wheels and put in/take out each part separately from the car (20 lbs for a stroller + ~8lbs for a kid is a lot!). But it seems like if I were to disconnect the car seat separately, the wheels would always have to stay in the base and then I can't even use the wheels anymore...At that point (around 8 months, I may as well just upgrade to a baby/toddler car seat and then use our full sized stroller, no?
@@yonahbar-shain2573 yup, that’s the limitation here. We travelled internationally with this and it’s awesome that the car seat+stroller can be used as a proper car seat with base in taxis and even airplane. But once your child gets to a certain height, the stroller attachment is not useful unless you take the kid out, then the whole stroller and then put the kid back in.
3 to 35 lb, up to 32 inches in height. So maybe 12-14 months. But it’s parent facing so child may prefer to outward facing stroller before the max size would allow.
No. It’s the safest. Away from airbags and sides of the car where impact might happen. Unless your car doesn’t have latches in the middle seat, it’s the safest spot.
This is the best review video I’ve seen. I almost threw mine down the stairs 😂
Me tooo
Great video! Thank you for helping new parents learn these life-saving skills to keep our babies safe while riding in a vehicle.
I have this. Some tips. First, installing without the base. The wheels only need to be used underneath if it isn’t level. They act as the leveler. The strap can go one of two ways. The lap strap only over baby's lap, or that with the shoulder strap behind baby.
Second the base can be used without the wheel covers if space in the back seat is a issue
Third, there are little pockets on both sides to put the lap clips into. They will hold the straps out of the way when putting baby in the seat.
Fourth the cupholder has to be clipped on in a specific way on either side. There is a notch in the clip and a hole on either side of the push bar on the top of the black portion. You have to put the notch in the hole or it will come off with any weight
This is one of the best best video review ever. You saved me a whole day with only 22 mins long video. I have never left any comments before but this is an exception!!! Thanks a lot! 🙏🙏🙏
Glad it helped! Thank you for the nice comment!
Like your instructions, man, straight to the point
best instructional video on car seats by far.. thank you for not making it confusing…. 💯💯💯❤
Very helpful thank you so very much! The manual had me confused and had no idea how to work it.
Thank you, Thank you, Thank you, I was getting a big headache trying to figure out how to use this seat.
Glad it helped!
Best review ever but mine did not come with the carryall bag what should I do and there's no yellow sticker on the sensor either.
Maybe you got a return? Return it and repurchase.
Do it comes with storage bag or was it brought separately?
Bought separately
When I try to remove the car seat only from the base in the car it’s not working, is there a specific step to do before , to remove it without the wheels in the car?
Make sure the seat+stroller is properly seated into the base. Then use the top white/gray handle on the back of the seat to remove just the car seat without base. You cannot remove seat from wheels when the entire thing is not on base, properly locked.
@@ViratPatelYTthank you, i could have sworn it was secured but I will try again thank you
Awesome video!
Answered so many questions! Thank you 🙏
I can’t get mine to come apart from the wheels, is there any other thing to do besides pressing button A?
You can only take it apart from the wheels when it’s mounted on the car base
@@ViratPatelYT Thanks for the swift response, I later figured that out.
I can’t figure out how to completely remove the cover to clean and I’m not finding any videos on it. Have you done this yet?
You are the best brother
I can’t get mine to come apart from the wheels even when it’s on the base. Is there a super secret way to get this feature to work? The video makes it seem so easy and simple but I’ve been struggling for 4 months.
It only comes off the wheels when it's seating on the base and you push the top button (A in the instruction manual).
My car seat doesn’t want to come off the base Idk what’s wrong with it ??
Love the video, ty! Can you also post the link for the seat protector?
amzn.to/4b58RZr
Best review I’ve came across. I just ordered mine this morning, super excited to receive it.
This thing is so difficult to fold the wheel. I got it in Black Friday discount for $389.99 + tax and thinking of returning it.
Didn't even used it once.
Amazing so helpful. thank you
What kind of car do you drive? I have an Audi SQ5 and curious if it will be too bulky.
This is a Tesla Model X
Thank you for this I was getting extremely frustrated
Awesome! What's your height so I can figure out how high the handle will be on me?
5ft 5in
I'm 6ft and it's a comfortable hight for me
I’m 5.8 it’s comfortable
Thank you so much! This is very helpful information.❤
Great video!
Thank you ❤❤❤
Can you disconnect the car seat alone with the top lever, put it down on the ground, then disconnect the wheels with the bottom lever and then reconnect them on the sidewalk? Also, any thoughts on how this drives compared to the Doona's bigger wheels (specifically on uneven sidewalks)?
No. Only the combination can be removed together. We used it on cobblestones, it’s not great, but I doing have a Doona to compare, but I bet bigger wheels would help
@@ViratPatelYT Interesting, because the whole reason I wanted this one was so that when the baby gets too heavy I can disconnect the seat and wheels and put in/take out each part separately from the car (20 lbs for a stroller + ~8lbs for a kid is a lot!). But it seems like if I were to disconnect the car seat separately, the wheels would always have to stay in the base and then I can't even use the wheels anymore...At that point (around 8 months, I may as well just upgrade to a baby/toddler car seat and then use our full sized stroller, no?
@@yonahbar-shain2573 yup, that’s the limitation here. We travelled internationally with this and it’s awesome that the car seat+stroller can be used as a proper car seat with base in taxis and even airplane. But once your child gets to a certain height, the stroller attachment is not useful unless you take the kid out, then the whole stroller and then put the kid back in.
Tnx alot
a lot
movement when the baby is in the carseat.... not much of a problem
How old can a baby get for just using it for a stroller
3 to 35 lb, up to 32 inches in height. So maybe 12-14 months. But it’s parent facing so child may prefer to outward facing stroller before the max size would allow.
With so much movement the child can fall. everything seems very complicated
Putting it in the middle is the most Dangerous place
No. It’s the safest. Away from airbags and sides of the car where impact might happen. Unless your car doesn’t have latches in the middle seat, it’s the safest spot.
My car seat doesn’t want to come off the base Idk what’s wrong with it ??