Should I try replacing the whole brew unit? I have the same problem and greatly appreciated your video. I cleaned the brew unit, replaced the gaskets, and greased the moving parts. Still having the excess coffee in disposal tray and soggy/half-sized espresso pucks. I tried to open the full panel, but the bottom, center screw is stripped. Do you have any other suggestions?
@@MaciejPiotrowski - thank you so much for responding! Yes, I cleaned the metal filter. Not sure what else I messed up, but after putting everything back together, clean water is draining everywhere, I’m getting the clean water circuits light, and no water will come out of the wand. 😞
@@QlikPro if no water is coming out of wand you must have a clogged line or water line connection to the wand is leaking or broken. You may have to take it apart to check connecting hoses. watch this video and you will see how to take it apart ruclips.net/video/YxlkbZ4w9Hw/видео.html
@@MaciejPiotrowski Yes, there's this video that shows 4 gaskets on the part inside. I ordered the gaskets, but they're not the right ones. the outside 2 (the ones you can see without dissassembly) are frayed and no longer even stretchy. ruclips.net/video/Fqd-RUTqRSo/видео.html (I took photos of the gasket sizes he shows in this video).
check brewing section for cloggs. Check that metal grid. Maybe your water hose is broke. You need to open the machine and see if you have any leaks from inside. Also motor pumping water might be dead.
dziuekuję! (from Lance in California)
Thank you. Your advice is greatly appreciated. And, your English is exceptionally good!
Thank you for advice Maciej 👍🤗
Thank you, Maciej. Very good explained. One of the best use full videos.
Glad it was helpful!
Very helpful! I had the same problem, thanks a lot!
Glad it helped!
Should I try replacing the whole brew unit?
I have the same problem and greatly appreciated your video. I cleaned the brew unit, replaced the gaskets, and greased the moving parts. Still having the excess coffee in disposal tray and soggy/half-sized espresso pucks.
I tried to open the full panel, but the bottom, center screw is stripped. Do you have any other suggestions?
have you cleaned the metal mesh filter that pushes against coffee ? maybe it's clogged, and not enough water goes through it ?
@@MaciejPiotrowski - thank you so much for responding! Yes, I cleaned the metal filter. Not sure what else I messed up, but after putting everything back together, clean water is draining everywhere, I’m getting the clean water circuits light, and no water will come out of the wand. 😞
@@QlikPro if no water is coming out of wand you must have a clogged line or water line connection to the wand is leaking or broken. You may have to take it apart to check connecting hoses. watch this video and you will see how to take it apart ruclips.net/video/YxlkbZ4w9Hw/видео.html
@@MaciejPiotrowski thank you so much! I’ll give it a try!
Do you have a video for the water link on the team section
no I do not, but I have manual I can send you so you can see all the parts
@@MaciejPiotrowski Yes, there's this video that shows 4 gaskets on the part inside. I ordered the gaskets, but they're not the right ones. the outside 2 (the ones you can see without dissassembly) are frayed and no longer even stretchy. ruclips.net/video/Fqd-RUTqRSo/видео.html (I took photos of the gasket sizes he shows in this video).
My water is not dispensing at all .. can you help please?
check brewing section for cloggs. Check that metal grid. Maybe your water hose is broke. You need to open the machine and see if you have any leaks from inside. Also motor pumping water might be dead.