Why does this not have more views and likes if I could leave a million I would! You just save me and my business I was about to give you! Thank you so much
Thank you for the video. We have the same printer. My black and yellow isn’t come out at all. I will continue to follow the same steps, hopefully it works out for me
Thank you so so so much!!!!!!!! i have been fighting to get my black to work and your tip worked like a charm. Wish i would have found your video sooner! Thanks again!
I converted my epson7210 into a sublimation printer I got it yesterday and followed the steps but it will only print blank pages can you please help me
This is GREAT… I am wondering though where would I push the air out of in a ET15000? I’m guessing I would have to go down to the cartridges under the bottles?
I am sooo thankful for you!! I have been fighting this sucker for hours!! Now do you have a video on printer settings lol? I have cosmo ink but it’s just not bright! Thank you again for this video because I was literally so upset!
I been up all night trying figure this out. I have sublimation pillow to do and my lines are missing when I run report. Im gonna try this when I get out of church this morning. I pray this works🙏🏽
awesome video thank you, but when i try to push air through my black ink there was little to no resistance and no ink on the paper towel, other colors pushed through no problem, any advise?
what if you do all of these steps and it still doesn't come out right? my color is basically nonexistent. I have cleaned the print heads multiple times and purged my ink several times as well. My YMC are all not printing. Thank you.
@@LaShellThomas-fy9nr Did u get it figured out ? I’m having the same issue. I’ve pushed solution through the heads & air through the cartridges & still broken lines on my blk & blue.
Omg this video saved my life! I did 2 head cleanings with solution and then no ink! I forced the air in and now I got pretty lines. Thanks soooo much!
Yesssss honey I’m glad it worked for you!
Virtual hug to you to say THANK YOU. I was putting the air through the wrong hole this entire time. FINALLY unclogged my yellow. TAHNK YOU!!!
You’re welcome!
🙌🏽You are a lifesaver. I have been racking my brain on how to get those lines close.
Why does this not have more views and likes if I could leave a million I would! You just save me and my business I was about to give you! Thank you so much
Thank you! 🥰
Thank you sooooo much! There were no videos that were helpful except yours.
I’m glad this technique worked for you. Thank you for watching!
Thank you for the video. We have the same printer. My black and yellow isn’t come out at all. I will continue to follow the same steps, hopefully it works out for me
Thank you so so so much!!!!!!!! i have been fighting to get my black to work and your tip worked like a charm. Wish i would have found your video sooner! Thanks again!
You’re welcome! I’m glad my video helped. Thanks for watching
I am From Bangladesh, Thank you so much, Your video so usefull, it's work.
Thank you for watching
THANK YOUUUUUUU!!!!! I could not figure it out but this video helped me outttttt!!
I’m glad it worked for you. Thank you for watching!
BEST VIDEO HANDS DOWN. SO HELPFUL I DEFINITELY HAD TO SUBSCRIBE!!! THANK YOU :-)
Thank you! You’re welcome!
Wow! ! Problem solved. Thank you
Awesome!!! I’m glad it worked for you!!
I converted my epson7210 into a sublimation printer I got it yesterday and followed the steps but it will only print blank pages can you please help me
We have the same printer. & I just wanted to say Thank you so much🎃🧡. Really helped me out!!
Thank you for watching! I’m glad my video was able to help you!
Lifesaver tonight!! Thank you!
I did it like 3 times and it’s still now working. Do you have any other suggestions? Do you think I should get new cartridges too?
Do your cartridges have the chip on them?
Worked like a charm ! Thanks so much for this video !!
You’re welcome
This is GREAT… I am wondering though where would I push the air out of in a ET15000? I’m guessing I would have to go down to the cartridges under the bottles?
Yes, try that!
I am sooo thankful for you!! I have been fighting this sucker for hours!! Now do you have a video on printer settings lol? I have cosmo ink but it’s just not bright! Thank you again for this video because I was literally so upset!
Thank you for watching! Yes, I have a video on printer settings on my channel.
Great job! Thanks for sharing.
Thank you for sharing this! Got mine to work 😊
Awesome! Thanks for watching!
Thanks for sharing I’ve done this and magenta will not come out ? I think I need a new cartridge for magenta
Try it again my cartridge did the same thing. If not definitely try another cartridge.
Straight to the point! Yes!
Thank you for watching!
I been up all night trying figure this out. I have sublimation pillow to do and my lines are missing when I run report. Im gonna try this when I get out of church this morning. I pray this works🙏🏽
Awesome! Let me know if it works
Lord u need 1000000 likes
awesome video thank you, but when i try to push air through my black ink there was little to no resistance and no ink on the paper towel, other colors pushed through no problem, any advise?
Hey thank you for watching. Just add more air in your syringe and push it through your black cartridge. Let me know if that helps.
My cartridges are not same as yours. Can you please tell me which hole do I need to press some Air? The one I use to fill cartridge? Thank you
What type of cartridge do you have?
@@Howtomaniac82 They are similar as yours but fill hole is all the way up and air vent is down.
@@RKoch-lc2tr you should still be able to do the same
God bless you. Thank you so much for this video.
You’re welcome!
Love you lol ! This has saved me so much time
You’re re welcome!
You’re welcome
what if you do all of these steps and it still doesn't come out right? my color is basically nonexistent. I have cleaned the print heads multiple times and purged my ink several times as well. My YMC are all not printing. Thank you.
Hello how would you push the air out it if you don’t have the refillable cartridges
@@natarshafavor3423 I’m not sure to be honest
@@Howtomaniac82 thank you.
thank for your tip thank. so much!!!!
You’re welcome
I have been killing myself!!!! Thank you so very much!!
You’re welcome!
Very good video
Thank you!
Hi, will this work with an ET 15000
Hey thanks for watching! I’m not sure if it will work with that type of printer. You can try it and see. If it does, let me know.
Muchas gracias!!! Me salvaste la vida!! ❤️❤️
Your the best!
Thank you for watching!
My ink is low and it’s prints blank would this work
Thank you so much!!!!
I've done this several times...my black is printing but still has missing spots in the black lines....my other colors are perfect... please help me
Thanks!
How can we do this for a ecotank
Thank you so much
Hi do you put the syringe into the air hole or the hole you fill for the ink? Sorry I'm new and my printer is having the same issues..thank you
Mine still have the broken lines in the blue :(
Blow that cartridge out again
@@Howtomaniac82 I did 4-5 times. broken lines in the blue are still there
@@LaShellThomas-fy9nr
Did u get it figured out ? I’m having the same issue. I’ve pushed solution through the heads & air through the cartridges & still broken lines on my blk & blue.
Mine is not printing nothing at all
Have you tried the method in the video?
Have you tried the method mentioned?
Didn’t work for me 😕
Didn't work for me
Oh no, try it again until the line is clear.
Why do you have to continuously do this
I’m not sure!
Thanks so much!!!