How To Repair Damaged Baseboard (With Hot Mud).
HTML-код
- Опубликовано: 27 авг 2024
- For more information on products used in video or to check out more of Mr. Jalapeño’s content Click link below. ⬇️
#amazoninfluencer #HDaffiliate #affiliatelinks
•direct.me/mrja...
So many great skills, I've learned a lot from you homie - thank you
Me too, though I've never used any of them 😂
Love your work. If you ever have to repaint baseboards try to use a foamy roller. And please don’t use bondo outside to fix rot. Yes it might be a temporary fix but not a long term fix. Keep up the work
Durhams rock hard!
You don't roll baseboards. You brush them
@@AbdelAziz0205 I roll them with thick mini rollers and they come out fine, and smooth. When you do this for a living, you buy good tools. If you take care of your brushes properly, try out a Picasso oval brush also, picked on up last year, much more comfortable to cut in with. Always gotta try to find more efficient ways to work, since money doesn't wait on on anyone.
@@mjm7071 I have been a union painter for 24 years in August.I do this for a living.
@@mjm7071 you don't need good tools.You need mediocre shit and take care of it.
Very soft product for a high traffic area
While the stairs themselves are high traffic, I’m not sure I would agree that that specific area he patched is really in danger, and any hit big enough to seriously damage such a shallow patch would most certainly damage wood as well. Also depends on the homeowners themselves and how the damage happened. Since it occurred during a Reno job, I wouldn’t be very concerned. The easy sand 5 stuff also dries surprisingly hard. I agree that a high performance, two part wood filler or bondo would be stronger, not every fix needs the most extreme solution.
It has plaster in it... it isn't a soft product.
I would have used the Bondo wood stuff for this dries very fast if you want because you decide the hardener amount
Do you think it stays the same consistency when it dries or something?
Bingo. Thinking the same thing. It won't hold up and obviously it was damaged prior needing repair being a vulnerable area. Completely inferior product.
Mr. Jalapeno does great work. I wish he was available for work in my area.
Bondo on that would be a better choice because of traffic and accidental kicks
Great stuff I love watching these shorts! Mr Jalepeno is the real deal!
Love the tip to use a foam roller. I painted some trim with the roller and flowtrol. Came out money.
Hell yeah bro - clean and simple, the way it should be!!!
That Sheetrock compound will look ok until temperature or humidity changes then it will crack. The unpainted caulk that was fingered on the wall side will eventually yellow, but I would worry more about that trim on the top stair, someone's gonna trip.
Or till the awkward furniture moving rips it off
Always gotta remind yourself what he’s being hired for, cheaper alternative. Considering it’s an MDF baseboard it had little to no durability in the first place.
Keep it up brother. Spread that love. I absolutely love your channel and already subbed. Super simple snd great for first time homeowner and people that just want to do it themselves
Your are the man Jalepeno!!
Dude you are so good
Wow... you are fantastic at your craft sir. Great video. TIL.
Wont the mud crack at the join when the wood expands and contracts over time?
Yup best use wood filler on joints
Bondo is a wondrous material. I live by it.
And in three days it’s chipped again.
Beautiful job!
Wood putty is just as good and intended for wood I love easy sand use it for everything walls not floors not wood
I never would have thought of using drywall compound on a baseboard. Is there an advantage to that method compared to bondo?
Easy sand five is adequate for this. Considering that baseboard itself is made of very soft pine
Bro your Killin it
Use wood filler drywall mud is susceptible to moisture it scratches and will eventually chip off wood filler is the best it's what it's for. I'm not trying to be disrespectful or discouraging I just wanted to give you a helpful tip for my experience keep making videos
Bast to prime the wood first then patch . I’ve done a million of those
Yep. Just a quick spray of Zinder 123 or BIN primer will make sure it sticks. People always say to use an oil-based primer, but the 123 stuff says it can be used for priming drywall mud and has worked great for me.
Boomm with the finger was the best part
Why prime before paint?
That’s gonna crack the moment something bumps it!
BOOM…. Awesome Video… thanks…
Blow and Go painters.
That's clean, gj.
Clean
Use a wet rag bro instead of Sanding...you will never sand again..no mess..Works great out huge patches too
Beautiful
Never do this shit. Use the right tool for the job. Go get and use wood Filler to fill the gap. Sand down. Paint.
Shortcuts always lead to having to do more work later on down the road. This guy is the epitome of "its not my problem once I'm gone."
What do you think of using a heat gun on easy sand after it sets up to get the moisture out? That’s what I been doing for my customers.
Use green top
Nice!!
Lived in a house where they did this over black mold.
Those damn flooring guys you can't trust them as far as you can throw them all so you should have waited to put that transition on until the base was back on so he didn't have to notch it out like that I also hope he staggered the scenes appropriately didn't leave any ages or let the same patterns touch each other
have you ever heard of punctuation?
@@Blazequine sorry I didn't realize you were easily confused and needed me to spell that specifically for you
How do you mix this stuff so it’s not lumpy?
You probably could use it on the exterior since it will be painted and sealed
Probably should use bondo there instead 🤦🏻♂️
Hot mud has No adhesion properties for this. If you're hell bent to use it, at least prime the bare material. The primer sticks to the bare material, and the mud will bond to the primer better than the bare material.
You can also prime before you caulk.
Mr jalapeno how much do you charge for repairs like that?
Spicy!!!
How much does that cost to repair
What happend? Nothing happend!
Jalapeno solutions… BOOM!
BOOM!
Carbondo works so much better
Boom!
Señor jalapeño!! Do you do any work for Richmond American homes out in Aurora Colorado by any chance?
How much did you charge ? 😅 I’m new at this please help!!
Hi cool videos.just wondering what city's you do work in ?and if your available
Why not to use bondo on this one? 🤔
Maybe just so he can show us you can do it with different materials im guessing.
How much would something like this cost?
Heat gun or blow dryer can greatly speed up dry time
Is it ok to use a heat gun to dry the wet stuff
Yes
What area do you work in
How much did u charge
How much do you charge for this? How much time did you have involved.
Bondo has officially been replaced?!
👍
Why not caulk the bottom in since no shoe mould?
It’ll turn yellow shrink and crack within a week. A lot more dirt than you think gets trapped under there. A dark silicone might be okay.
Forgot to paint the wall now.
I just want to know what do you charge for these small jobs?
How much can you charge for something so small like that I have a handyman service and it’s complicated on pricing.have any suggestions?
Personally for the very small jobs I do a base of $40 that covers travel and inconvenience of a small job, then I charge 40-50 an hour for the labor, to the nearest half hour and I always add in a little something for materials.
Its gonna shrink and crack in a week
Ever heard of wood putty ?
why do i feel disappointed that there wasn't a ramen-filled, plastered & green-painted jalapeño embedded into the repair area?
That’s some real hacky shit bud
Boom
If it wasn't cheap particle board for the baseboard this wouldn't be a problem.
I thought it was called a skirting board🤔
Habanero solutions
Easy sand 5 is HOT mud. Should be called easy sand 2.5
You could sand 5 minute mud in 20 minutes
Bro.... That 5 minute mud is no joke.
You've got 5 minutes. And 1 was spent mixing in your pan! Use hot water to mix and you've got 180 seconds, max! 🤣
The most accurate comment of all time
That's gonna Crack and look like crap!!!! Never never use bondo or plastic filler for the exterior it's not supposed to be used in wet environments without auto primers and paints
That isn't bondo or a plastic filler my guy... settle down.
Why...
Life hack. Wait did you know Vanilla Ice did a song about the TMNT? It's like we're in an alternate universe.
Or ummm woodfiller
I love you
A patch is not a repair. Let's get that shit straight. Repairing something implies it's just as good or better than the original.
That's literally a bandaid. In six months it'll be chipped again.
Bro put drywall mud on baseboards smh
It's fine homie
@@nothingsimpostleble1593 nah it’s not
Doesn’t the mud come off later on ? Just wondering bc I’ve tried putting durabond on primed particle board and it would not bond well with it the mud kept chipping (low key figured that would happen but tested it anyways)
@@ecapote7899 just use Bondo with a white hardener the adhesion is great.
@@imnotcrazyaskkim6591 agree with you 200per cent
The cheaper guy. Using mud to patch mdf 😂
Se pasa este compa, ni pa eso sirve hahaha
This is not gunna last
If you are leaving brush marks then you are not a good painter. Them foam rollers are trash.They leave a stipple on the baseboard that after months of hitting with a mop get water under neath it.Lay that off with a brush.Thats apprentice stuff using a foam roller.
What?! No bondo!!!!
I am habanero solution
Fear me
🥵🔥
I am pepper x solutions bow before me!!!
Wouldn’t recommend bondo…….not even on cars. Short strand fiber glass body filler will hold up much longer, especially in moisture prone areas. Just saying
Whyyyyy, whyyyyy didn't you chaulk the gap above the thresholddddddd
Maybe because it wasn’t part of what the client wanted? Sometimes people can (understandably) be very picky about what you do to their house and only want you to address the specific damage they wanted repaired.
Don’t use latex caulk, use easy sand on the top too.
What happened to the bondo in the beginning I thought you were going to say Bondo that you said easy sand 5 🤦
Lol...
MH.
Caulk and paint will make you what you ain't ,SMH
Orale
But your using 5 minute mud.....your times are way off lol
This guys has never used flowtrol or knows what it is funny
Weak comment
@@kbram7363 what is it then tell me right now
Hey jalapeño not jalapeno
Guaranteed to crack.
How much do people pay for this?
I imagine that the price wouldn't be worth calling someone else out to do it but he does so many of these small fixes so just asking to see if anyone knows.
Or is he paid by a HOA and comes everyday to a community and does small fixes?
I just don't understand how it could be worth it for both parties to fix such small things.