The benefit of a counter pressure can filler would be the ability to can a beer with higher carbonation that would otherwise just foam too much. You could still pull it off the seal at the end and add a bit more beer to get a bit of foam to cap on. Would be great if you offered an attachment for cans.
I have found with the higher carbonation beers its just easier to chill the kegs down a bit lower. Normally on a commercial filling line they would super chill the beer to close to 0C and slightly overcarbonate beer that is getting filled into cans
Looks like a Tapcooler, with some modification, nice unit though, and looks like it might come in a bit cheaper than the competition. I bought a Tapcooler a couple of weeks ago and love it!
Yes we considered stocking the tapcooler but for what it was the price just did not stack up. Also we hated that some of the tapcooler accessories were made from aluminium instead of stainless and we also wanted the threads on the body of the device to be the very common and standard 1/4" so they fit many of the other fittings we sell such as the duotight fittings.
You need the part number KL18067 and this has 3/8 thread on one side and 8mm on the other side. This is a new part and arriving into Australia on the 10th May.
I must say you guys have got some real quality stuff/kit, however I'm tending to find recently when going to purchase something like this/kegerator/counter pressure Filler etc it tends to always be out of stock or months away. You have missed out on quite a few sales. Great to have new products but pointless if we can't buy them when we want too.
Sorry about this. We generally release the video as soon as we start manufacturing the product. The videos are not only for retail customers like yourself but they also inform our wholesale customers that these products are avaiable to order. With that said it takes sometimes up to 2-3 months for the stock to trickle down from our manufacturing and consolidation centre to all the various retailers around the world. I can understand this is frustrating but hopefully you find them worth the wait.
@@mackenziedunham18 These will soon be available from: www.morebeer.com www.williamsbrewing.com If you contact them they will hopefully be able to provide you with some time frame on when it's going to be available.
We did not invent this design. With that said the other products on the market were not well made had aluminium accessories, were double the price and also did not include the accessories in the kit. So overall it was difficult to justify the cost to our customer base when we knew we could do a better job of manufacturing this product.
Awesome and no goofy clamp 😍
You will be happy to know I ordered another mic clamp from Japan so I soon will be able to get rid of the bulldog clip. : )
The benefit of a counter pressure can filler would be the ability to can a beer with higher carbonation that would otherwise just foam too much. You could still pull it off the seal at the end and add a bit more beer to get a bit of foam to cap on. Would be great if you offered an attachment for cans.
I have found with the higher carbonation beers its just easier to chill the kegs down a bit lower. Normally on a commercial filling line they would super chill the beer to close to 0C and slightly overcarbonate beer that is getting filled into cans
Looks like a Tapcooler, with some modification, nice unit though, and looks like it might come in a bit cheaper than the competition. I bought a Tapcooler a couple of weeks ago and love it!
Yes we considered stocking the tapcooler but for what it was the price just did not stack up. Also we hated that some of the tapcooler accessories were made from aluminium instead of stainless and we also wanted the threads on the body of the device to be the very common and standard 1/4" so they fit many of the other fittings we sell such as the duotight fittings.
I've been in the market for a counter pressure bottle filler.
You will not find a better value unit anywhere.
what spout do you use to connect nukatap with duotight?
You need the part number KL18067 and this has 3/8 thread on one side and 8mm on the other side. This is a new part and arriving into Australia on the 10th May.
I must say you guys have got some real quality stuff/kit, however I'm tending to find recently when going to purchase something like this/kegerator/counter pressure Filler etc it tends to always be out of stock or months away. You have missed out on quite a few sales. Great to have new products but pointless if we can't buy them when we want too.
Sorry about this. We generally release the video as soon as we start manufacturing the product. The videos are not only for retail customers like yourself but they also inform our wholesale customers that these products are avaiable to order. With that said it takes sometimes up to 2-3 months for the stock to trickle down from our manufacturing and consolidation centre to all the various retailers around the world. I can understand this is frustrating but hopefully you find them worth the wait.
Need to add this to my collection! any plans for UK availability? thank you.
If you ask Malt Miller in the UK they will probably add them to their next order with us.
When will it be on the website??
Its on the website here:
www.kegland.com.au/nukatap-counter-pressure-bottle-filler.html
We should have stock arrive in about 6 weeks
@@KegLand OKAY. I put the number in the search bar and it said NO. I then saw your link in the comment to register for an email. cheers
@@stewartmanders2291 no worries at all. Let us know if we can assist further.
@@KegLand Any ideas when this will hit the y'alls US distributors?
@@mackenziedunham18 These will soon be available from:
www.morebeer.com
www.williamsbrewing.com
If you contact them they will hopefully be able to provide you with some time frame on when it's going to be available.
Wowzas! That's pretty blatant copying of another product. 🤣
We did not invent this design. With that said the other products on the market were not well made had aluminium accessories, were double the price and also did not include the accessories in the kit. So overall it was difficult to justify the cost to our customer base when we knew we could do a better job of manufacturing this product.