Thanks. I was looking for a camera video to add to my unit. I might also set up my ring cameras as they can now show multiple cameras at the same time, you can be live checking up to 4 cameras at once.
Thanks again for your message .I think a front on camera is better like you say just add a blink or ring camera you will get a better angle and can record if needed ;-) .I use my Blink camera like I show on a previous video .I see this camera can do time lapse so might try that next :-)
Love it I have tried a couple of Cameras on the mobile app and they work the first time then after that I just get network error when previewing the camera. Hopefully the correct camera will fix that.
I did have the same happen with this camera but just refreshed and it worked fine ?. I will keep an eye on it and let you know how I get on :-) I think its all going though the cloud and they are having a few issues at the moment so hopefully when the network issue is sorted it will work better for you :-)
Thanks for your message and watching my uploads :-) .The Anycubic camera just plugs into the usb on the printer and you see the image on the Anycubic slicer software on the workbench page ...Or the software I use to capture the video's I make is called Droid cam its an app I run on my tablet and PC ...
Thanks for your message I got the files from www.reddit.com/r/AnycubicOfficial/comments/1e2f0u8/kobra_3_camera_mounting/ But looks like the link to the stl's is not working at the moment :-(
Where in the fuck do i get the file to print the camera enclosure for my kobra 3 camera? And don't say anycubic wiki! Because I've tried that ! I cant read Chinese! And there AI .... DOESN'T HAVE THAT INFORMATION IN THERE DATA BASE! im sorry for the bad language but I've been searching for the file and qll im getting is a run around! ANYCUBIC, youtube, redit.....are not here to help just to keep you on there sites! I just need the file.
I just looked back though my download folder and found the 3 stl files :-) .I can add them to my google drive for you to download . hope this helps drive.google.com/drive/folders/1QHRbCTowDJNjkHKUEwd2_kovf1el4nSo?usp=sharing
Thanks this was very helpful
Thank you for the video camera hook up...now to go try it on my AC...
Thanks for the message and watching my uploads.let me know how you get on :-)
Thanks. I was looking for a camera video to add to my unit.
I might also set up my ring cameras as they can now show multiple cameras at the same time, you can be live checking up to 4 cameras at once.
Thanks again for your message .I think a front on camera is better like you say just add a blink or ring camera you will get a better angle and can record if needed ;-) .I use my Blink camera like I show on a previous video .I see this camera can do time lapse so might try that next :-)
Love it I have tried a couple of Cameras on the mobile app and they work the first time then after that I just get network error when previewing the camera.
Hopefully the correct camera will fix that.
I did have the same happen with this camera but just refreshed and it worked fine ?. I will keep an eye on it and let you know how I get on :-) I think its all going though the cloud and they are having a few issues at the moment so hopefully when the network issue is sorted it will work better for you :-)
What is the app for the camera? Please let me know. I dont know what to do. NO MANUAL.
Thanks for your message and watching my uploads :-) .The Anycubic camera just plugs into the usb on the printer and you see the image on the Anycubic slicer software on the workbench page ...Or the software I use to capture the video's I make is called Droid cam its an app I run on my tablet and PC ...
Hi, where did you get the Camera File from?
Thanks for your message I got the files from www.reddit.com/r/AnycubicOfficial/comments/1e2f0u8/kobra_3_camera_mounting/
But looks like the link to the stl's is not working at the moment :-(
Where in the fuck do i get the file to print the camera enclosure for my kobra 3 camera? And don't say anycubic wiki! Because I've tried that ! I cant read Chinese! And there AI .... DOESN'T HAVE THAT INFORMATION IN THERE DATA BASE! im sorry for the bad language but I've been searching for the file and qll im getting is a run around! ANYCUBIC, youtube, redit.....are not here to help just to keep you on there sites! I just need the file.
I just looked back though my download folder and found the 3 stl files :-) .I can add them to my google drive for you to download .
hope this helps
drive.google.com/drive/folders/1QHRbCTowDJNjkHKUEwd2_kovf1el4nSo?usp=sharing