THANK YOU SO MUCH for making this video. It was incredibly helpful not to mention 100% clear, concise & straight to the point. Listing of materials in both languages was just the cherry on top. I went through tons of pages before stumbling across yours & I was relieved that the video wasn’t forever long & direct. A lot of others are sneaky with their wording like they don’t want you to truly know how to make the decorations or balloon item lol (it’s hard to explain) so they will only tell you how to do it in a manner that will work out if you purchase specific supplies, via THEIR own store or whatever…. Naturally. I understand wanting to promote your place but when they go on & on & on forever talking in circles and then leave you without a list of materials that you can get elsewhere or even sometimes just the dang sizes of the balloons it’s a tactic that makes me want to buy anything from their store so much less. It feels greedy desperate & kind of deceptive at times. Especially when the title says free diy tutorial or something. Like… alright dude, on a technicality I guess. But then there are wonderful other people out there like this guy who save my derrière around my daughter’s bday !! 🫶🙏😮💨🥳 so GOD BLESS YOU man. Ugh I am so stoked right now!! Tysm
Hello Sarah, You're welcome and we are so humbled and speechless reading your wonderful comment about us. It really means a lot. Thank you so much and thank you also for your support to our channel. Advance Happy Birthday to your daughter. Have a great day.
Hello K A Y B O N I T A, pls. make sure that your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 11 inches Balloon. You will then inflate your 11 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 11 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Please try it again and don’t give up. Once you figure this out it’ll be easy for you. Thank you so much for watching our video.
Hello. I need to practice doing these but how far in advance can I prepare these flowers? My granddaughter’s birthday party is in October but I would need to start making them now to allow for my learning curve and errors. Please help…
Hello Linda, when it's flowers, distortion like this design, it is not good to prepare this ahead of time cause the petals will swole up and it will change the look/design of the flower. So in our case the maximum we prepare is only the night before if use in the morning and that same day (morning) if use at night time. Just keep on practicing so that by October you'll get use to it already and a bit more faster in making this flower. You can do it. Just keep on practicing. Thank you.
I have a hard time making thesa flowers. The outside balloon crushes the inside one.. I'm wondering does it have to do with the size of the round balloon?
He explained so well yet i didn't understand not even with the video so I for some reason ended in the north of texas instead of making a petal balloon, this is so confusing just like math used to be for me .. 😢😢
Hello Michael, sorry for the late reply, hold both nozzle while pumping the 260 balloon. Air might come out a little bit but that's fine, you can always add little air if needed. Thank you.
Hello Suzette, for this project I think we use the one from Amazon but I think they are out of stock for this kind. Qualatex is great too if you want. Thank you.
Hello Gilda, we use different brands in 260Q or we call it modelling balloons. 260Q is from Qualatex (a great quality) but we also use those from Amazon or the one we have in our Ebay store. Thank you.
Hi, thanks for your video, i have learned so much skill watching your video. I’m trying to look for low temperature glue gun but not able to find in Malaysia. Can u send me link if can get in Amazon? Wondering if the plug can use here too.
Hello, this the link in Amazon (this is not the exactly the same as what we use but this is also a dual temp glue gun) - amzn.to/3i6L055 But honestly, with this glue gun I am not sure if this is okay to plug (or use) in Malaysia since we have different voltage here in the US. But just to be safe, I don't recommend you buying this and use it in your country just for safety reason. It will be better if you get it from your country (hopefully if there is one). Thanks again so much.
@@fambamny appreciate your thoughtful response and kindness. I make the huge number bouquet (standee) sometimes the foil or latex won’t stick strong together with balloon dots tape unless use modelling balloon.
Hello, for a Balloon flower projects (balloon distortion) we usually do our best to make it as close to the event as possible, cause if we will do it ahead of time it's not good since it will easily get deformed esp. the shape of the petal (because of the 260 balloon inside that sometimes will pop. So we usually do it on the same day if we can or if we can't then we will do it the night before but there's a possibility that it get's deformed. Thank you.
Hello Riddhi, The trick is, make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 5 or 7 inches Balloon. You will then inflate your 5 or 7 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 5 or 7 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Please try it again and don’t give up. Once you figure this out it’ll be easy for you. I know you can do this. Have fun and please let me know if you have any question. Thank you so much for watching our video and have a nice day. I hope this is clear to you , please let us know if you have any question, thank you and have a wonderful day.
Hello nala, we use different kinds/brands of balloons. I think in this project we use Qualatex. But sometimes we also use generic brands that are also good. Thank you.
Hello Dejavu, I know exactly what you mean, that happened to me way back when. The trick is, make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 5 or 7 inches Balloon. You will then inflate your 5 or 7 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 5 or 7 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Please try it again and don’t give up. Once you figure this out it’ll be easy for you. I know you can do this. Have fun and please let me know if you have any question. Thank you so much for watching our video and have a nice day.
Hello shyr, since I am using a smaller latex balloon, instead of using the whole 260Q inside the latex balloon, cut it into half and you can use the other half as well. Thank you.
Hello Denise, make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 11 inches Balloon. You will then inflate your 11 inches balloon. Pinch the tip and then you will pump your 260 until you’ll see that both ends of your 260 protrude at the entrance of your 11 inches balloon. Now you have to make sure air won’t come out on your 260. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260 until it resists, in that way it won’t be too soft. Remember if your 260 is too soft it can easily get deformed. I hope this will help you. Thank you and have a nice day.
Hello Maria Compagnone, This is Cheland, my wife Aileen told me about your question. To be honest with you, I have not tried making petals using double stuffed balloon before. I would think it'll be too hard for your 260q balloon to handle and it could easily get deform. But it's worth a try, you can always try it with just one petal to see if it works or not. I hope it'll work in that way you can really get the right color of flowers you wanted. Thank you.
Hello Silver Mom, the little stick is mostly from a foil balloon like those numbers or letters or those huge foil balloons with designs (it comes with it already). I honestly don't know where to get something that is just the stick alone. But maybe you can do an alternative to it like a balloon stick . Thank you.
Hello Christina, make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 5 inches Balloon. You will then inflate your 5 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 5 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Thank you and have a nice day.
Здравствуйте, вы также можете использовать обычный латексный шар, мы также используем его с нашими цветочными шарами. Иногда мы избегаем обычного прозрачного латекса, поэтому мы также любим использовать хром, поскольку он непрозрачен. Спасибо.
Your skill level and creativity are top notch!
Thank you so much kismet
Love, love, love ❤️..... super sweet demonstration .... Thank you 🙏
Thank you so much Janet.
Me encanto este video!!!! Flores perfectas!!!! Gracias por enseñarnos ♥️
De nada Luz y muchas gracias también por el apoyo a nuestro canal.
OH MY GOODNESS, THIS IS SO EXCITING!!! I HAVE TO TRY THIS, THANK YOU THANK YOU THANK YOU!!! HUGS!!!
You’re very welcome and Thanks so much also Maria for watching a lot of our videos. We really appreciate it.
Those are so vibrant and beautiful! What a nice addition to any balloon masterpiece
Thank you sis
Thank you for sharing. Such an easy explaination. You're great. Thank you for sharing.
You are so welcome Renuka and thank you so much also for the support.
Oh Thanks so much FamBam I'm not even good at distortion. But this was good for me.
Thank you Donna Donaldson.
Love it
Thanks so much Goddess
FamBam NY: My admiration and respects for you and your wonderful talent 😉!!!
Thank you so much LUCILA. It means a lot.
They are beautiful. keep up the great work you're doing
Thank you so much Christina. We appreciate your support.
Love this! So beautifully creative!🥰
Thank you so much Vee :)
Same I have tried so many times I still can't do it...
THANK YOU SO MUCH for making this video. It was incredibly helpful not to mention 100% clear, concise & straight to the point. Listing of materials in both languages was just the cherry on top. I went through tons of pages before stumbling across yours & I was relieved that the video wasn’t forever long & direct. A lot of others are sneaky with their wording like they don’t want you to truly know how to make the decorations or balloon item lol (it’s hard to explain) so they will only tell you how to do it in a manner that will work out if you purchase specific supplies, via THEIR own store or whatever…. Naturally. I understand wanting to promote your place but when they go on & on & on forever talking in circles and then leave you without a list of materials that you can get elsewhere or even sometimes just the dang sizes of the balloons it’s a tactic that makes me want to buy anything from their store so much less. It feels greedy desperate & kind of deceptive at times. Especially when the title says free diy tutorial or something. Like… alright dude, on a technicality I guess. But then there are wonderful other people out there like this guy who save my derrière around my daughter’s bday !! 🫶🙏😮💨🥳 so GOD BLESS YOU man. Ugh I am so stoked right now!! Tysm
Hello Sarah, You're welcome and we are so humbled and speechless reading your wonderful comment about us. It really means a lot. Thank you so much and thank you also for your support to our channel. Advance Happy Birthday to your daughter. Have a great day.
These are very pretty to add to a Garland.. very nice💜💜
Thank you so much.
Amezing job, beautiful flowers. Thank you for share..👍👍👍🙏🙏
Thank you too for watching. Have a nice day.
Beautiful ballon flower ❤
Thanks 😍
Thank you so much :)
Como siempre, las flores lindas y elegantes... eso si que paciencias, la verdad
Muchas Gracias Henry Daniel.
@@fambamny :3
Masterpiece!!!! 🥰👍👏👏👏👏
Thank you very much!
Nice and wonderful flower balloons creation,i love it i'm your 1 of your subcriber
Thank you so much 😀
Ka pretty ba. Look diamond ang naa sa tunga. Hehe cute kaayo.
Thanks sis
Wow! Ang galing nyo! That’s amazing!
Thank you Irene
I’m doing by mouth 😂😂 so I think this all is a little too advanced for me. But great job and nice tutorial!!
Thanks so much :)
You are amazing! Thanks FOR this video
You're so welcome Magagdaga and Thank you also for the support.
Looks very nice and easy to do
Thank you Craft Tee's.
Any advice for why my 260q bends horribly when I let go of the air of the bigger balloon ? It doesn’t want to turn into a pedal for anything 😢
Hello K A Y B O N I T A, pls. make sure that your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 11 inches Balloon. You will then inflate your 11 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 11 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Please try it again and don’t give up. Once you figure this out it’ll be easy for you. Thank you so much for watching our video.
Sıcak silokon sürünce balonlar patlamıyor
Soğuk silikonmu kullanıyorsunuz
Merhaba Sümeyye, düşük sıcaklıkta (soğuk) tutkal tabancası (silikon) kullanıyoruz. Teşekkür ederim.
I learned a lot from you thank you
You are so welcome and Thanks so much for the support.
Beautiful flowers 💐😍.
Thank you so much 🙂
Hello. I need to practice doing these but how far in advance can I prepare these flowers? My granddaughter’s birthday party is in October but I would need to start making them now to allow for my learning curve and errors. Please help…
Hello Linda, when it's flowers, distortion like this design, it is not good to prepare this ahead of time cause the petals will swole up and it will change the look/design of the flower. So in our case the maximum we prepare is only the night before if use in the morning and that same day (morning) if use at night time. Just keep on practicing so that by October you'll get use to it already and a bit more faster in making this flower. You can do it. Just keep on practicing. Thank you.
Thanks!
Thank you so much @yennygdesign We really appreciate it. Have a blessed day.
So beautiful! 😍
Thank you so much.
❤
Thanks so much TheBestUni!
I have a hard time making thesa flowers. The outside balloon crushes the inside one.. I'm wondering does it have to do with the size of the round balloon?
Hello Judith, may we know if what size was the round balloon that you used? Thanks.
He explained so well yet i didn't understand not even with the video so I for some reason ended in the north of texas instead of making a petal balloon, this is so confusing just like math used to be for me .. 😢😢
Hello Liz G-M, sorry to hear about that. But if you have questions regarding balloons please let us know. Thank you.
Love it
Thank you so much Mee Cha.
Pagka pretty..easy r kaau ky bro cheland
hehehe. Thanks sis. Sauna sis maglisod sab siya ani until sige lang practice na kuha ra tawon niya..hehehe
After the last time you blow up the 5 inch how do you keep the air from coming out?
Hello Michael, sorry for the late reply, hold both nozzle while pumping the 260 balloon. Air might come out a little bit but that's fine, you can always add little air if needed. Thank you.
These are amazing!
Thanks so much Vered.
It never works for me when I try and do it lol
make 2 of us
I’m with you guys, smh
Hello Hannah, just keep on trying. I was like that too when I first started making petals. Just keep on practicing.
Hello Mayreni, When I started making this flower balloon I also had hard time making it :). I wasted a lot of balloons... lol
Just keep on trying Ashland, hopefully you can do it soon. I am like that too when I started making this balloon flowers.
Hola buenas tardes
Tengo una pregunta
el pegamento es silicona caliente ?
Hola Gladys, esa es una pistola de pegamento de doble temperatura y se enfrió. Gracias.
❤❤❤❤Thank you!
You're welcome Persida and Thank you too.
I love this!
Thanks so much Tiffany :)
Amazing!!
Thank you so much.
Wow! Is there anything you can't do...Very creative and it looks awesome. Of course I subscribed. It's just Great artwork.
Thank you so much Gloria and Thanks for the support.
Maayo kay di mobuto ug tuyoktuyokon na hehe
Awesome n very creative 👏👏❤️❤️
Thank you so much 😊
What brand is the chrome balloon?
Hello Suzette, for this project I think we use the one from Amazon but I think they are out of stock for this kind. Qualatex is great too if you want. Thank you.
Do I have to get qualatex for the 260 balloons also .. so it can give me that effect.. I can't get that effect.
Hello yesenia, you don't have to but Qualatex are also a great quality so it is better. Thank you.
Great job ❤️
Thank you so much Tigist.
These are amazing!!
Thanks so much and Have a nice day.
Good very very very nice
Many many thanks
Hi. What kind of balloons do you use? The regular ones or the flex ones? I tried the regular 260 and they don't work, not flexible.thanks
Hello Gilda, we use different brands in 260Q or we call it modelling balloons. 260Q is from Qualatex (a great quality) but we also use those from Amazon or the one we have in our Ebay store. Thank you.
Amazing 🤩 amazing 🤩
Thank you so much Rosaura.
Do the 260 inside do you inflate it or the 5 inch I’m confused
Hello Ann, it's the 5 inch balloon first then followed by the 260 balloon which you inflate also. Thank you.
Beautiful
Thank you Sharon :)
Beautiful
Thank you so much Esther
I surprise , how using glue gun did not burst the balloon?
We use a low temperature glue gun. Thank you.
Hi, thanks for your video, i have learned so much skill watching your video. I’m trying to look for low temperature glue gun but not able to find in Malaysia. Can u send me link if can get in Amazon? Wondering if the plug can use here too.
Hello, this the link in Amazon (this is not the exactly the same as what we use but this is also a dual temp glue gun) - amzn.to/3i6L055
But honestly, with this glue gun I am not sure if this is okay to plug (or use) in Malaysia since we have different voltage here in the US.
But just to be safe, I don't recommend you buying this and use it in your country just for safety reason. It will be better if you get it from your country (hopefully if there is one). Thanks again so much.
@@fambamny appreciate your thoughtful response and kindness. I make the huge number bouquet (standee) sometimes the foil or latex won’t stick strong together with balloon dots tape unless use modelling balloon.
Большое спасибо😘!
Пожалуйста, и спасибо вам также
I ordered balloons and ready to give this a try, but on a side note I would die if I saw my hubby using a glue gun over my carpet 😂😂😂.
lol.... that's funny. :) anyways, thanks for watching our video. Have a nice day.
Brilhante 😮❤
muito obrigado jo
Hi this is nice. what if i dont have a dual temperature glue gun? can i use glue dots instead?
Hello Lovely, yes it's okay to use glue dots. Just put more to make sure that it's sturdy. Thanks.
No idea how he's doing that, can't see the opening of the balloon while he's filming
How far in advance of event can you make these?
Hello, for a Balloon flower projects (balloon distortion) we usually do our best to make it as close to the event as possible, cause if we will do it ahead of time it's not good since it will easily get deformed esp. the shape of the petal (because of the 260 balloon inside that sometimes will pop.
So we usually do it on the same day if we can or if we can't then we will do it the night before but there's a possibility that it get's deformed. Thank you.
My petal is not taking shape as urs , any suggestions about it pls
Hello Riddhi, The trick is, make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 5 or 7 inches Balloon. You will then inflate your 5 or 7 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 5 or 7 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Please try it again and don’t give up. Once you figure this out it’ll be easy for you. I know you can do this. Have fun and please let me know if you have any question. Thank you so much for watching our video and have a nice day. I hope this is clear to you , please let us know if you have any question, thank you and have a wonderful day.
Can you use adhesive instead of the glue gun?
Hello Louella, yes you can. That's what I also used before. Thanks.
What type / brand of ballons are you using..? mine are not that good quality so they pop 😏
Hello nala, we use different kinds/brands of balloons. I think in this project we use Qualatex. But sometimes we also use generic brands that are also good. Thank you.
Would you mind providing information or the link for the low temp glue gun you are using?
Hello Jill, here's the link (from Target) - www.target.com/p/elmer-39-s-craft-bond-full-size-glue-gun-dual-temp/-/A-51605448#lnk=sametab
@@fambamny thanks so much!
Is that a normal glue gun?
Hello Yesenia, we use dual temp glue gun and set it to low temp. Thank you.
Amazing
Thanks so much Pinky.
hello sir does the normal glue stick for hot glue gun can also be used in low temp glue gun?
Hello Mary Joy, sorry but I honestly don't know because I always use the glue stick for the dual temp. But you can try maybe it will work. Thank you.
@@fambamny thanks always for your reply sir!
When I deflate my balloon they won’t keep the petal shape why is that?
Hello Dejavu,
I know exactly what you mean, that happened to me way back when. The trick is, make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 5 or 7 inches Balloon. You will then inflate your 5 or 7 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 5 or 7 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Please try it again and don’t give up. Once you figure this out it’ll be easy for you. I know you can do this. Have fun and please let me know if you have any question. Thank you so much for watching our video and have a nice day.
This was happening to me too
I'm trying this but I can't make it perfectly how how how? Im using a glossy 260Q
Hello shyr, since I am using a smaller latex balloon, instead of using the whole 260Q inside the latex balloon, cut it into half and you can use the other half as well. Thank you.
Awesome
Thanks so much.
Why does my 260 fold inside? Completely closed! When its blown up
Hello Denise, make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 11 inches Balloon. You will then inflate your 11 inches balloon. Pinch the tip and then you will pump your 260 until you’ll see that both ends of your 260 protrude at the entrance of your 11 inches balloon. Now you have to make sure air won’t come out on your 260. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260 until it resists, in that way it won’t be too soft. Remember if your 260 is too soft it can easily get deformed. I hope this will help you. Thank you and have a nice day.
Amazing! ❤️
Thank you so much Ara Ganio :)
What type of balloons are these
I think this is Qualatex. Thank you.
How big is the finished flower or each petal?
Hello Suzanne, the size of the finished flower (each petal) is around 5 to 6 inches. Thank you :)
Hermoso
Muchas Gracias Seneida :)
❤❤❤❤
Thank you SORI.
What kind of balloons you use qualatex
Hello Celines, we use different brands of Balloons but for this project I think it's Qualatex and it's one of our favorite too. Thank you.
@@fambamny thank you
You did a great job with the balloons
@@celinesgomez6209 thank you so much.
What glue did u use? Thanks
Hello Lionhart, for the glue, we use the dual Temp glue
Gun set to low.
The brand is Elmer’s dual
Temp glue gun.
Thank you.
It is possible do the petals with Double stuffed balloon?
Hello Maria. I will ask Cheland later to answer your question as soon as he gets home from work. Thanks (Aileen)
Hello Maria Compagnone,
This is Cheland, my wife Aileen told me about your question. To be honest with you, I have not tried making petals using double stuffed balloon before. I would think it'll be too hard for your 260q balloon to handle and it could easily get deform. But it's worth a try, you can always try it with just one petal to see if it works or not. I hope it'll work in that way you can really get the right color of flowers you wanted. Thank you.
Thank you so much . I’ll give it a try
@@mariacompagnone3133 you're welcome.
😍😍😍😍😍💯
Thanks so much Paula
Where do you buy the little stick?
Hello Silver Mom, the little stick is mostly from a foil balloon like those numbers or letters or those huge foil balloons with designs (it comes with it already). I honestly don't know where to get something that is just the stick alone. But maybe you can do an alternative to it like a balloon stick . Thank you.
Mine keep folding and do not keep the shape I do not know what I'm doing wrong
Hello Christina, make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 5 inches Balloon. You will then inflate your 5 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 5 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Thank you and have a nice day.
😍😍😍
Thank you.
Do you offer classes?
Hello LaKedra, sorry but I don't. Thanks so much for watching and for the support.
@@fambamny well if you ever start please add me to a list because I would pay to come.. your work is great
@@lakedrajohnson-bogart7105 Thank you :)
i like to how to in box you i need some extra info if you can
Hello Marisol, you can message us through Instagram (FamBam NY). Thank you.
this was very nice but a little too fast
Hello Myra, sorry about that, Thank you for letting us know and Thank you also for watching.
very 👌
Thanks so much.
Great idea. But the camera coverage is not very clear. Disappointed:(.
Thank you for the feedback.
Почему именно хром?
Здравствуйте, вы также можете использовать обычный латексный шар, мы также используем его с нашими цветочными шарами. Иногда мы избегаем обычного прозрачного латекса, поэтому мы также любим использовать хром, поскольку он непрозрачен. Спасибо.
I sent you a message on Instagram, do you have access to your inbox on there? It’s a question about you trying something? X
Hello Kiri. We just message you there. Thanks.
This is not as simple as it looks, my hands hurt
Hello Yetunde, yeah this project needs more time and practice, once you figure it out, it will be fine. Thank you.
oh hell no!
😂😂😂
Love it
Thank you Sue Guidry 😊
Beautiful
Thank you Molly
What brand of balloons do you use?
Hello Valarie. I think it is qualatex for this project. Thanks so much,
What brand balloon is this?
Hello t____cole, I think it's Qualatex. Thank you.
Yes it's beautiful, thanks
@@WowTZ Thank you