Love the grill and the look! I have a '23 VB as well, the Premium (in the States) with the manual. I for one like how the car looks. WRXs should always be slightly frumpy and odd looking, leave the nice lines for the 330s and A4s out there.
That's fair! I remember looking at the 350z when it came out and it was horrific to me, but now it looks normal and fine. It's always good for us all to have different styles so we aren't all the same 😎
I have a lot of Dmaker/ Street Element parts fitted to my VB & couldn’t recommend them highly enough. I’m in Sydney so I always get them to install. The last est part I’ve bought is their carbon fibre/alcantara steering wheel & next up is paint matched +10mm fender flares. I’m starting to run out of parts to fit so maybe enlarged bonnet scoop & fog light/DRL’s next.
Clean. Love the hood. Wonder if its new or not available in the states but i haven't seen any videos on the bigger scoops. Going to look more into it now!
Thanks heaps! You might be able to get these Dmaker stuff through their site or eBay site if you want one. There's a couple styles as well was a hard choice haha
You can run that turn signal yellow wire on the LED headlights. You just need to splice it into the turn signal wire of the harness . It’s a different color on each side. I don’t remember what color it is off the top of my head but you can find it fairly easy if you have a multimeter.
If you look more closely the new ones actually do have some spots cut out near the top, hard to see but when they’re both on his floor, you can see the floor through the new vents toward the top of that section, but I’m thinking of cutting this section out on mine and seeing if I can route the intake there so I’m sucking outside air not engine bay air
Random question for ya and the grill you have! There was a rubber tray behind the bumper when i did my grill install, did you just remove it completely and then reinstall the bumper? I ended up tucking the rubber guard in and it was super awkward for the grill since it sits super deep in. Cheers
Yep I removed that one and it sits nice :) I have a video about replacing the grill a few back on my channel go to 10 mins 15 seconds of that one and I go through it. Hopefully that helps! 🙏🏼
@@JoelBrownefilms Tried to do mine this morning, failed miserably. Watched back and fourth for how you unclipped the hinges from inside the bumper at approx 4:36. Was way to scared I would snap it and it felt like it didn't want to budge at all when trying. Ended up not commiting to doing it and throwing the bumper back on. At the end I also noticed I bought the wrong fuse tapper, a normal size not a mini so wouldn't of worked in the end. But after some tips, not sure I want to pay someone to do work along those lines. Will be sending it into the shop for short shifter and varex exhaust shortly but I figured the lights should be easy enough for myself to install like you did in the video. Cheers.
Love the look hey! It's nice having a big scoop in the line of vision again like the old wrx/sti. I have removed the grill from the scoop since as well and it looks really good 🙏🏼
I know they are in the process of moving shop location so might affect their response time - I'm not sure but. The guys there are pretty nice and helpful and I'd expect they will reach out pretty soon if they haven't yet
wow that scoop is a must-have lmao, definitely gonna look into it
That scoop is awesome!
Really changes the look hey!
Not a fan of the music for the b roll but the car looks so sick man, wow
Oem cherry red emblem will be the icing on top for me.
Anyways nice mods ❤
Love the grill and the look! I have a '23 VB as well, the Premium (in the States) with the manual. I for one like how the car looks. WRXs should always be slightly frumpy and odd looking, leave the nice lines for the 330s and A4s out there.
That's fair! I remember looking at the 350z when it came out and it was horrific to me, but now it looks normal and fine. It's always good for us all to have different styles so we aren't all the same 😎
I have a lot of Dmaker/ Street Element parts fitted to my VB & couldn’t recommend them highly enough. I’m in Sydney so I always get them to install. The last est part I’ve bought is their carbon fibre/alcantara steering wheel & next up is paint matched +10mm fender flares. I’m starting to run out of parts to fit so maybe enlarged bonnet scoop & fog light/DRL’s next.
Car looks awesome. Good job
Thanks so much! Keen for more mod updates soon!
Love your channel,and your ride looks awesome.
Keep up the great work and looking forward to your next video
Thanks so much for the support 🙏🏼
Very clean car. I cant make up my mind on if i like the scoop or not tho.
Such a nice car brother 👍
Thanks man 🙏🏼❤️
Clean. Love the hood. Wonder if its new or not available in the states but i haven't seen any videos on the bigger scoops. Going to look more into it now!
Thanks heaps! You might be able to get these Dmaker stuff through their site or eBay site if you want one. There's a couple styles as well was a hard choice haha
I lied. I have seen these apparently. Even thumbs upped some videos 😂 ADHD is a bitch
😆
It looks awesome boy
You can run that turn signal yellow wire on the LED headlights. You just need to splice it into the turn signal wire of the harness . It’s a different color on each side. I don’t remember what color it is off the top of my head but you can find it fairly easy if you have a multimeter.
Sick will look into this thanks heaps! 😎
Hey, im interested in how you made the turn signals work, do you have a video or instructions anywhere?
Replacing the fake vents with fake vents was a master-stroke!
If you look more closely the new ones actually do have some spots cut out near the top, hard to see but when they’re both on his floor, you can see the floor through the new vents toward the top of that section, but I’m thinking of cutting this section out on mine and seeing if I can route the intake there so I’m sucking outside air not engine bay air
a 100x better. you should be part of the subaru design team I reckon
I appreciate it! Now that would be a pretty cool job haha
Random question for ya and the grill you have! There was a rubber tray behind the bumper when i did my grill install, did you just remove it completely and then reinstall the bumper? I ended up tucking the rubber guard in and it was super awkward for the grill since it sits super deep in. Cheers
Yep I removed that one and it sits nice :) I have a video about replacing the grill a few back on my channel go to 10 mins 15 seconds of that one and I go through it. Hopefully that helps! 🙏🏼
@@JoelBrownefilms Tried to do mine this morning, failed miserably. Watched back and fourth for how you unclipped the hinges from inside the bumper at approx 4:36. Was way to scared I would snap it and it felt like it didn't want to budge at all when trying. Ended up not commiting to doing it and throwing the bumper back on. At the end I also noticed I bought the wrong fuse tapper, a normal size not a mini so wouldn't of worked in the end. But after some tips, not sure I want to pay someone to do work along those lines. Will be sending it into the shop for short shifter and varex exhaust shortly but I figured the lights should be easy enough for myself to install like you did in the video. Cheers.
Nice
Hi mate,what’s your Weather Shields brand?thanks
Dang man… you’re making it hard for me to not snag a scoop for my black VB.
Love the look hey! It's nice having a big scoop in the line of vision again like the old wrx/sti. I have removed the grill from the scoop since as well and it looks really good 🙏🏼
Soooo much better
Changes it completely hey!
What exhaust system are you running?
I'm running an XForce Varex that I painted the tips black. I have an install vid on the channel a couple videos back if you're interested
What wheels are those?
Work d9rs I have a video on them a few back with specs :)
Keen to do a mods list?
this is a good idea! might do a walk around next video of all mods
Is it normal not to get any email after ordering from dmaker its been 3 days
I know they are in the process of moving shop location so might affect their response time - I'm not sure but. The guys there are pretty nice and helpful and I'd expect they will reach out pretty soon if they haven't yet
Let me know if you want to sell the oem fog lights kit..
Hey man, I appreciate it but I'm keeping all the standard parts for possible reuse in future :)
Wtf looks exactly the same as before, just got holes now, crap
You didn’t happen to notice the DRL’s the Dmaker bezels have?
Should’ve gone to spec savers mate.🤓