CAT D10 Dozer Cylinder Rebuild | Part 3 | Making the New Rod
HTML-код
- Опубликовано: 7 авг 2024
- This video is part 3 of rebuilding a Caterpillar D10R dozer blade tilt hydraulic cylinder. In this episode we are replacing the damaged cylinder rod. The rod has scratching and the chrome is damaged so needs to be replaced. We start with pressing out the old bushing to check if the eye is damaged or not. Then the rod is setup in the lathe and we machine and part the eye off the cylinder rod. We machine up the new cylinder rod using 4" inch diameter induction hardened chrome bar. We need to machine both ends of the cylinder rod, the first end we are machining for the piston and cutting the external thread for the nut. The other end of the rod we also machine to fit the original rod eye, which is then MIG welded with metal cored wire before machining down the welds to complete.
Missed Part 1 or Part 2? Watch it here: • CAT D10 Dozer Cylinder...
In this video we are using:
- HMP-150T Hydraulic press
- TM-26120G Centre Lathe
- WIA 500i Weldmatic welder
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: bit.ly/ceesubscribe
Join our Patreon community: / cuttingedgeengineering
To see more follow us on online here:
Instagram / cutting_edge_engineering
Facebook / cuttingedgeengineering...
Official CEE Merch shop: www.ceeshop.com.au
Check out our AMAZON store and explore our favourite finds that we use in the workshop:
www.amazon.com/shop/cuttinged...
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: www.epidemicsound.com/referra...
#australianmachinist #machineshop #machinist 
Наука
Hey viewers thanks for watching today's video Part 3 of the Cat D10 dozer cylinder rebuild series! It's coming along nicely and with no dramas is always a bonus. Keep an eye out for part 4 😎👍
Subscribe and hit the bell icon to turn on notifications so you don't miss our weekly uploads. 👇 🤳
Follow us online here:
Instagram instagram.com/cutting_edge_engineering
Facebook facebook.com/cuttingedgeengineeringaustralia/
Thanks for making these videos! :)
Baiklah sir..
1 am, Sinaloa, Mexico. Thanks 👍🤜🤛
In the United States it is very common to have hydraulic cylinder rods ground and hard chromed as a way to restore the rod to factory conditions.
Do you ever do that or do you only replace the rods?
@@longliner205a4 Hey mate it's more economical and faster for us to just replace the rod.
So much to unpack here: The machine work, the blooper reel, Kurtis' mastery of the English language, Homeless trashing the office until he gets his toy. P.S. That dog needs his own YT channel.
All the goods! Hahaa we aren't giving him his own channel yet will lose all our subscribers 🤣😭
@@CuttingEdgeEngineering "Yet". So you're saying there's a chance. lol. Cheers from Canada.
@@CuttingEdgeEngineering it kinda looks like he already stole your channel hahahahahahaha
When do you and when do you not use oil on the lathe? What is the determining factor?
Should name the next dog Hot foot.
This guy is just awesome, the confidence he has machining these huge precision lumps of metal. I can only wish I could be like him, and I'm not being sarcastic
Cleaver skilled person 👍 we need more like him.
Best wishes, Geoff Lewis, Wales, UK, 🏴🏴🏴
Hey mate appreciate it! Thanks for watching 😎👍
Watched all three parts, looking for part 4. I hope you can get back to this project again. I know I'm not the only one that likes to see these projects to the finish.
Its gone
Somehow, I find myself addicted to all things machining and your channel is fast becoming my favorite, the humor, your interplay, the craftsmanship, the scale of the jobs you take on, etc. Very enjoyable, thanks from Canada!
Hey mate wow thanks for saying so we appreciate it. Cheers 😎👍
Good to see you using the lifting rquip rather than humping stuff around, keep your back safe so you can age without f@rked discs etc!
Yeah great to have an overhead crane in the shop 😎👍
Its nice to have a machining channel on YT again instead of one that just shows off tools that companies send in or tools viewers send in.
Hey mate thanks for watching glad you enjoy the vids 😎👍
Hello Brian, yes I totally agree with you, I know exactly who you are talking about (a large bomb) who as far as I am concerned does more posing than machining. A BIG joke. Never watch him anymore. Kurtis is the absolute opposite, and he replies 👍 has to be one of the best Channels on RUclips 😊. Geoff Lewis, Wales, UK 🏴
@@jerryuk93 Hello JerryUK I am glad others see him for what he is, I could say quite a bit about, what I have noticed over the years watching him is his Penny pinching attitude yet he has expensive vehicles. Even wouldn't replace a WORN OUT BAND SAW BLADE. As you said JerryUK his loss not ours. Kurtis is "Brilliant" and his 2 crew, 💐 this for the Lady and 🍖 this for Boyo 🐕, 👍. Geoff Lewis, Wales, UK 🏴
Hello Jerryuk. I recently looked at the large (bombs) subscribers his was showing 84K. And Kurtis, the lady and the Safety Officer have managed 1002K it just goes to show who is watched the most, and rightly deserved, excellent. Thanks for the reply 👍👍. Best wishes Geoff Lewis Wales UK 🏴
My Dad had a South Bend 13 in at home in his shop, he used to show me how it worked and how to thread, I wish he was still around to watch this on my 65 in big screen TV 🙂😉👍❤️
He's with you my friend. ❤
@@maggs131 ; thank you very much …….
Waiting for Part 4 ! Glad to see the Safety Officer learned how to get his chewie out of the chair, even if there might have been a little collateral damage. Great team keep up the good work!
No computer harddrives were harmed in the making of this video 😂👍
@@CuttingEdgeEngineering did part 4 ever come out? I was watching this series from last year and don't seem to be able to find it
Did you ever find out if part 4 came out?
Got to love it when you inspect the Bush and its better than expected 😂
Yeah not a good day when it's a flogged out bush 😂👍
Профессионал,которые объединяет в себе как минимум четыре специальности:сварщик,токарь,слесарь,водитель вилочного погрузчика..., БРАВО!
Могу добавить, что он добрый человек, любит женщин и собак)))))
привет, приятель, спасибо за просмотр!
@@johnbrown-rm8kc Thank you for the translation, I was curious as to what this says.
Also, I agree entirely.
It is definitely "why am I up right now?" o'clock here, but I'm also definitely making a coffee and watching the hell out of this!
Awesome way to start the day have a good one mate 😎👍
@@CuttingEdgeEngineering Start the day end the day just give me good coffee and a great vijit that is what's happening now. LOL
Thanks for the slowmo and the SPARKS show HoooWoooBoy
Watching from the state's. Machining for 30 years. Love your channel.
This is to say thank you, for your hard work and sharing it with us! Kurtis and Missus, y’all make an awesome team, video production quality is great. Much respect from Florida.
Hey mate thanks for saying so! We both appreciate it and glad you are enjoying the vids over there. Cheers
@@CuttingEdgeEngineering Absolutely, you both deserve it. I’ve know many machinists that don’t have your work ethic Kurtis. And since I’ve caught up on all your videos (finally 😂) after finding your channel last week. Your Missus has absolutely made your channel both highly informative, but highly enjoyable. Cathartic to get right down to it. The quality only continues to get better!
Seeing Kurtis in the bloopers, let’s us get to see the human side and the ability to kinda get to know you in a sense, and with your missus being there brings us along for the journey. Homeless is just a cad! Such a ham on camera, but again, kinda brings us into your world, for those that are loving homeless, if that’s his real name?
Best wishes, Rob
@@dystopianlucidity4448 Hey Rob that's some awesome feedback mate! We both enjoy what we do and I can see it comes across for viewers to enjoy as well. Haha yeah his name is really Homeless, he is the 2nd Homeless had another staffy quite a few years back who had the name and it was so unique we kept it going. We usually call him Homey unless he is in trouble haha. Cheers, Kurtis 😎👍
That lathe looks awesome to run, just no deflection or chatter at all even on the wide chamfer cuts, just peeling off a perfect ribbon hahah love it
Hey mate yeah it goes well, Taiwanese made with German bearing system 😎👍
Without hearing protection? Don't underestimate it. Your films are very fine. Thanks a lot. Regards.
Thank you Kurtis, Giggler's on form today and The Safety Officer is disposing of explosive devices.
Gday Mate, I gotta tell ya, Friday nights around 6 is the best part of the week, I look forward to this all week and since I’ve been watching your channel which has been quite a while now I’ve never been disappointed, thanks mate for the awesome entertainment and big thanks to Mrs Kurtis for the fantastic editing, cheers Matty
Hey Matty! Always great to see your comment I reckon yours was one of the first this week. Might have a bonus vid coming up soon just started on a big project. Have a good weekend mate. Cheers, Kurtis, The Missus & Safety Officer 😎👍
Hello Kurtis the video lady and "Boyo" 🐕, I see the grenade is still looking intact he hasn't pulled the pin on it yet, 🤪🐕. Another very good video Kurtis, and very good clear film of you working on various machines, for the
"Lady 💐" Please keep them coming allways enjoy watching you work. Best wishes, Geoff Lewis, Wales, UK, 🏴🏴🏴.
Hey Geoff we both enjoy reading your comments mate thanks for taking the time to watch the vids! haha Yeah that grenade is a tough one of his favourites to chew. Have a good weekend mate 😎👍
I watched your videos mate and am awe struck and dumbfounded at your knowledge and abilities the way you just know what to do each time and the perfect machining you do Its hard to believe you have had no formal machining training you do this so well its a pleasure to watch a skilled person such as yourself as you work Keep up the good work
I do not know how anyone could do a better job of capturing your machining skills with her before/afters, slo-mo, close ups, chip follows, panning and zooms than your missus. VERY professional! Love the scrap bin landings and you two make a perfect team. We get to enjoy the finished video but have no idea how long it takes to edit which I know has to be lengthy so thanks a heap. Just for giggles and grins, have you thought about reversing roles for at least part of the interviews and then you could laugh at her. :-)
Hey mate thanks for watching and the brilliant comment we both enjoyed reading it. Yeah she puts in hours for editing but enjoys it and glad the viewers are loving it. I bet we'd turn camera on her and she'd get it in the first take 😂👍
The scale of these things fascinates me. When mounted where it belongs, it looks tiny. Yet when you handle it you have to use a crane and forklift.
Yeah pretty crazy when you see that 1 part imagine the size of the whole machine
I remember watching one bloke assemble a 750 ton extrusion press on his own with a Demag overhead crane, even the hydraulic pipe couplings needed a hoist and he made it all look so easy.
Thanks Kurtis for another great video. I told my son that if he was just half as talented as you are he'd be rich.
Hey mate thanks for watching
Always a pleasure to watch and never boring! Love the scenes of tossing the junk. Would enjoy a vid on explaining induction hardening and other Harding processes. Also, chrome bar stock and how its made and why you use it. Your channel is the best!
I INT SURE WHAT I LIKE MORE THE MACHININ, THE BLOOPER REEL OR THE DOG, REALLY LOVE THE DOG
The dog is a natural on screen 😂👍
Одно удовольствие наблюдать за работой профессионала.
Собака просто очаровательна.
Привет, приятель, спасибо за просмотр
You're the only person I know that has all the correct snapring pliers!
Nothing better than logging in and finding a new video from CEE, the joy of seeing Curtis turning a huge lump of stuff into a precision part makes my day every time. You make cutting those huge threads look so easy...Looking forward to the next one Thanks for sharing this and hope you don't get too wet up there like we are in Sydney at present - stay safe.
Привет ребята 🤗🤘.заварили крепкого чая, начинаем просмотр. Блин огненная стружка эпично смотрится. Спасибочки большое за редкий интересный контент💯👍:-)
Привет, приятель, рад, что тебе понравилось, спасибо за просмотр! Ваше здоровье 😎👍
Really nice!!!!! I love watching this channel every Friday!!!!! It’s crazy the way that torch vaporizes the paint on the cylinder eye when you were heating up the welding area! Great job!
Hey mate thanks for always watching and commenting we notice and appreciate it! 😎👍
Cold frothy things whislt watching bright shiny things..another week over..another quality vid from CEEA..
Really looking fwd to the final assy..
Have a great weekend folks..Patchy 🍺🍺
Hey Patchy! Sounds like a great way to watch the vid. Glad you enjoyed it and thanks again for the great comment. You have a good one too mate Cheers, Kurtis
Hi Kurtis,
Good show today... Good to see everyone was in good form (You, Camerawoman, & dog)... See you all next week...
Take care.
Paul,,
Hey Paul! Yeah mate was a good day for videoing I think only need 10 takes this time making progress haha Cheers, Kurtis 😎👍
Not quite sure what it is but the chips that never break and just keep spooling off the tool just get me every time. Absolutely love the work you do Curtis. Bloopers are so good and the wife's giggle cracks me up just as much as you saying FUCK... looking forward to part 4. Cheers
Hey mate thanks for the great comment and taking time to watch. Cheers 😎👍
Great series Kurtis, I have enjoyed every step of the project, and I'm looking forward to part IV. Cheers!
Hey mate great to see your comment thanks for watching again! 😎👍
I don't think the bloopers are the BEST part of the video, BUT I SURE DO LOVE EM, especially hearing her laugh.
They are my favourite part hahaa Cheers thanks for watching 😎👍
Well you know that you will not have a warranty issue with any of your workmanship. It’s a great job 👏 you have done
Hey Bryan thanks for watching mate appreciate it! 😎👍
Good morning! Ahhh the third part. I really was looking forward to this one. Coffee is made, Video is on! Have a nice weekend!!
Hey mate enjoy! Will do and you have a great weekend too 😎👍
@@CuttingEdgeEngineering Hey Kurtis, one question for me as an amateur: how long did this whole process that you put into those three videos take? Two days?
It’s an interesting process, cutting the thread is amazing to watch. Normally you drop a part off & pick it up you don’t see what’s involved with the the repair process
Hey mate thanks for watching 😎👍
good and interesting work again! The best thing for me is that in these hard times, you haven't lost your good sense of humor, thanks for that! Greetings from Germany!👍👍👍👋👋👋🤝🤝🤝🇩🇪
Hey mate we've had it pretty luck where we are very grateful but helps when you doing what you enjoy. Thanks for always watching and commenting! 😎👍
As all us fans have stayed up for the CEE block busters video. The video was as smooth as your lathe skills. Thanks to the Editor in Chief.
Your product that goes out that shop's door is perfect.
You must go through a lot of lathe tips working on very hard steel.
Cheers 👍👌🇭🇲
Hey mate thanks for waiting and watching! We seriously appreciate that support. Yeah we go through a fair few of the ceramic inserts usually what we buy the most of. Cheers, Kurtis 😎👍
The engineering is brilliant.The quality and content of videos is brilliant and the dog is a fu#@ing legend👍👍
Awesome mate glad you enjoyed it 😎👍
You need to get those chips entered into the Instagram Chip of the week 👍. They just had a giveaway for the Chip of the year a free extractor for oil sumps or chip clean up .
Hey mate we actually posted a vid on instagram yesterday will see if it goes into the competition! 😎👍
I like the case of VB in the corner of the office. One of the perks of being your own boss.
hahaa yeah i'm the boss, when she's not around 🤣 That carton was a gift from a viewer!
Another Friday saved from the doldrums. I'm always pleased that I learn new things from your videos. I did feel rather badly about Homey and his grenade, until he finally trashed the office and got it! LOL Thanks, as always for a great video.
Ok, it's 4am here and I woke up for whatever reason. Made coffee and here I am.
Hey mate! Starting your morning right haha good on you 😎👍
Judging by his actions with the grenade and the chair, Homeless must be very strong :P But such a sweetie.
All brawn not a lot of brain 😂👍
Homeless - so that's his name; I thought he was called Hogan 🤣🤣
I find it very soothing to watch somebody who makes an eranets professional living by repairing heavy machinery teh right way. THANK YOU. Not only are you extremley skilled, but by fixing things which might otherwise be just thrown out, you actually do your personal part for protectin gour environment. Kudos to you!
Hey mate thanks for watching glad you can appreciate it! 😎👍
Serious balls taking on this project and acting like it’s no big deal. You got mad skill bro
Hey mate bit different when you're doing this stuff day in day out it really is no big deal 🤣 Thanks for watching!
Just went through all your videos. Pretty awesome man! Wish I had that kind of experience
Your safety officer has some cat in him.
He also thinks he is a human at times 🤣
Really like your channel, great to see a craftsman excel at his work.
Glad you enjoy it! Thanks for watching 😎👍
While all those other commenters were up at 4AM watching, I was having a great sleep.....Waited until 9AM to tune in and enjoy the show while having my breakfast...Cheers from Canada!
Yeah mate i'd be with you gotta get that beauty sleep in when I can haha Thanks for watching and glad you enjoyed it 😎👍
Seriously grand chips there. Satisfying stuff...who else enjoys seeing the material spiral off? Good video there mate. Thanks
Glad you enjoyed it. My missus likes watching that spiral swarf 👍
Great work and great camera work. Those threads came across as a perfect fit on the big nuts.👌 Congratulations on 100k subs well deserved to you's both 👍
Hey John! Thanks mate appreciate you watching and supporting. 😎👍
Soooo part 4 then lol, and the dog chair drama - hilarious.
Part 4 might be a little while off, we've got a shit load of work to get through here
😎👍 For the workmanship and the video quality. I cast this to my 64" tv and its a pleasure to watch. Thanks.
Nice one! Best way to watch it. 😎👍
Like the step of cleaning up the weld after. Sign of good workmanship.
Aww yeah, them Friday feels. Been hanging for this all week.
Makes working nights and having my lunch at 3am worth it!! Take a break from running machines to watch machines 🤣
Hey mate thanks for waiting and watching!
@@erics8889 You got it bad hahaa not going to lie I do the same 😎👍
Gettin it done, great video guy's, I'm doing my first line boaring job this week excavator boom pins. Great job.
Hey mate nice one let us know how you go with it! 😎👍
Good job, I think we got the message! We are all waiting for PART 4.👍👍🇬🇧
hahaaa glad I got that out right in the end
I do so enjoy your videos, I am retired now but have worked in Heavy engineering building Valves for oil, gas and water pipelines from start to finish...(Robt Cort and sons) and my love of precision knows no bounds, but In my latter years I opted for the maintenance sector which was more suited to my ageing body, however, please keep your fascinating videos coming, they are very educational especially for those that do not appreciate how important precision maching is.10/10
Stay tuned for Part 4 where we'll see Kurtis do the lolly with a centre drill after the point breaks off and sticks in the part. 🤣🤣🤣 Sorry, I couldn't resist that one, but you have to admit that's what the pointy little bastard's ambition in life is to do to you. 😁
Now you've said it I just know it's going to happen soon thanks mate 🤣
Homeless was saying “I’m going to get even with the human who did this evil trick on me!”
Well worth every moment. I'm so glad the grenade has withstood Homey's playfulness.
And Sneeker sends two paws way up.
Hey Sneeker and human! We are glad you enjoyed watching me, that chair was a challenge but couldn't beat me in the end. Now to continue trying to dismantle this grenade. 🐾🤣
Thanks for your great videos. I always like to watch them. Here in Germany, I also work in machining, but I can still learn tips and tricks from you. Greetings from Germany
2.9k/399
True work of art. She flirts with you & you loose your tongue
Thanks for watching
What a bombshell, the Safety Officer has a secret name! Part iv should be just as riveting, the PC gets knocked over starting a fire and the safety officer’s grenade is blamed! Will the truth be revealed??
another great video can't wait to see it finished. quick question Kurtis when you machine the weld to separate the eye from the old rod does how it's joined make a difference how you approach the job, like if its friction welded or normal mig weld.
Hey mate thanks for watching great question. Yes it does make a difference. MIG weld usually bit more guess work trying to determine how it fits together and machining apart to suit the existing join. With friction weld (like this one) much easier to machine/part off and turn a spigot at the same time.
I know I’ve commented before about the sights and sounds of your shop but, I feel compelled to mention the opening of your vids. The snap as your hit the on button and the spool up of the lathe. That is the signal to grab my seat quick like in a movie when the opening music starts and you hurry back to your seat with the popcorn and soda checking the movie screen to be sure you don’t miss the first scene. Then mid way the satisfying spin of the nut on newly machined threads and I exhale with satisfaction of a job well done! Here I hit the pause button to replenish my beer and popcorn then settle down for the finale. I’m glued to my seat until “awright guys that’s it for today and thanks for watching” still not able to leave till I see Homeless and hear Karen giggle….
Thank you for your video, It great to see you in action again. Greeting from Dublin Ireland bless you both.
Кыргызстан 👍👍👍
The 12mm button seems to be your go to insert for digging out the rod: is there a specific reason for that choice, or is it just because it works?
Hey mate yeah works well, it's very robust so they last a long time and can really feed it so removes a lot of material quicker
Just to let you know, old guys watch too! I enjoy watching the videos, great content.
Hey mate! Yeah we've got all sorts watching, my missus sees all the analytics she said more than a quarter of our audience is 55+ 😎👍
it is nice to see you have the confidence you make all your jobs look so easy i enjoy watching your videos.
Do you make scratch passes when setting up for threads, or do you just send it? My favorite part of these machining videos are listening to the chips breaking and falling. You and Abom79 have some of the best stuff out there! Cheers!
Hey mate just send it! Thanks for watching appreciate the support 😎👍
@@CuttingEdgeEngineering
Lathe: Levers, dials, and buttons set
Kurt: Just gonna send it! 🤘
1:30 a tense moment as the single most deadliest item on the planet, gets removed...
ye those fuckers are already annoying in small sizes
Awww yeeees, always stoked when a CEE vid drops on Friday. Came for the machining content, stayed for the bloopers, subbed for Homie's antics. 🍻
Legend! Thanks for watching mate glad you enjoy the vid! 😎👍
Outstanding work, attn to detail. My hat is off to you. You have found quite the niche to have in your business. I really like the blue color that appears on the waste chips. . Work hard. Drive fast. Speed safely.
Great editing and content as usual.
Curious if this will sell for same as new or a % less than new?
Hey mate we will sell for less than a new OEM part 😎👍
Loving this series! Quick question: Whats the jubilee clip on the rod for when you;re welding the eye on? Is it to dissapate heat or something?
Hey mate the hose clamp is holding on a piece of aluminium sheet to protect the chrome rod
@@CuttingEdgeEngineering Brilliant, thanks. I missed that the first time around. I can see it now :)
Hello again. you are a good guy and know what you are doing, I love to see you work on difficult things, I just say BRAVO 👍🌹
Got my machining/ Homeless fix . Another awesome video and 12:40 am here on the West coast of Canada so off to bed feeling satisfied.
Crazy mate thanks for watching have a good end of week 😎👊💥
Also I wanted to know why you use coolant on some cuts and none on others?
Hey mate a few reasons... depends on the material being cut, with the chrome induction layer I use ceramic insert so no coolant on those otherwise thermal shock and the insert shatters. The carbide inserts can be run hot/dry or flooded wet so I prefer less coolant mess and usually only run it when taking heavier cuts. Hope that helps 😎👍
@@CuttingEdgeEngineering yeah that's great info, cheers 👍🏻
Thanks for taking the time to reply
''i'm just going to machine down the weld.''
AvE youtube channel - ''a good coat of paint makes me the welder i aint.''
hahaaaa classic. You know your welds suck if still looks like shit after paint 😂👍
The cameraman and video editor are excellent ! Greetings from Russia!
She says thankyou!
Fantastic videos mate. As I Chartered Engineer I fully appreciate the skills you are employing!👏👏👏👏👍👍
Another really great video guys!
The camera shots are brilliant!
The checking of the first thread you did, was that checked with a go-no go gauge?
Hey Sean! Thanks for saying so, the missus is loving her S10 camera much nicer close up and slow mo. That was an original CAT piston to test the thread
The last time I came this early, my girlfriend got pissed off. 10/10. 🇦🇺 🏴☠️
My work here is done #machinistporn 😂👍
Wow, I can't believe I hadn't seen this video before. At this point it's nothing I haven't seen already. The best part was the outtakes with you guys, and homeless trying to get the grenade! Priceless! Discovering this on an off night was nice.
Ps. after the preamble to the latest Franna crane project, I couldn't not take notice of Kurtis's teeth--looked like mine.
Thank kurtis and crew another great video.
The outtakes are great! Bravo! The dog is a hoot! We dig your you tube vibe!
Hi Kurtis and Karen,
Glad I checked before turning in. It's 4:15 AM here and saw you uploaded new video. Always enjoy watching you at the lathe. Both of you stay safe.
Hey Don shit that's early! Absolute legend you are always one of the first to watch thanks mate
Hallo Kurtis en Karen ,wat een geweldig vakwerk leveren jullie wat een nauwkeurigheid mijn complimenten voor Karen voor haar camera werk.
Groet Hans uit Holland.
I cried a little inside when you threw that steel away. I live in the philippines and pirces like that are pure gold here
yeah we knew some people would cringe at seeing that 😅
I like the videos very good job. I missing part 4 greetings from the netherlands.
Love to watch you, run those big machines , taking a piece of steel and making something out of it,Amazing ? Love the Bloopers, the dog was getting pissed , glad he got it before he tore up the desk.As usual i rang the bell > Be Safe, See Ya
Hey mate thanks for watching and the great comment glad you enjoyed the vid 😎👍
Homeless could be the second show of the week followed by 3 hours of the bloopers ,, another great video thankyou for taking the time too video and edit the show ,, it's always great to watch .. looking forward to part 4 .. till then keep the chips flying ..
Hey mate thanks for watching and commenting! My missus is working on a "meet the safety officer" sort of video haha
Ironic that the dogs toy is a Grenade, ref lasting the longest 😂.
Ceramic inserts have come down in price tremendously, very useful in the shop.
Great work both, and great video.
Thanks for sharing and stay safe all.
John.
Hey mate! Yeah we've found a great supplier and brand that has saved us a lot of $$$ on those inserts. Thanks for always watching and commenting John we appreciate it Cheers, Kurtis 😎👍
Absolutely brilliant mate look forward to part 4
No disappointment this week, you are building the excitement for part 4, this is quite the series, and Homeless steals the show again, sorry Kurtis, at lest the swearing was better, I mean there was less.
😂😂😂 The less talking I do the less swearing there is! Thanks for watching mate glad you're enjoying the vids
The best thing to watch on RUclips. The dog always hits his mark with no messing up. All though Kurt's on the other hand is the Plucky comic relief. No just kidding he is very good at what he does. I wish I could do that. Keep it up I enjoy watching your channel.
Oh by the way I'm still waiting for a hat.
Ha ha
hahaa yeah doggo is a natural on screen we know he brings in the most subscribers for the channel 🤣 Thanks for watching mate. Hats & lots of other merch coming soon!
For me it's always a pleasure to watch a real professional working ...🤗
Hey mate thanks for watching 😎👍