Been drag racing forever , learned something on this video , the sickest part is this actually looks like a true street car , much respect to all that had a hand in this build!!
Cool build. Love the sleeper look. The black hood with the tall cowl induction kind of spoils the sleeper look. Have you considered putting on a low profile intake like a Holley low ram with a front throttle body? I think this might allow you to get rid of the big cowl. A short cowl might still be needed. Paint the hood body color and this thing will really fool a lot of people! Hope you have lots of fun with this. I will look for you on drag week this year! BTW, that 5.08 1/8th ET should put you pretty easily under your 7.99 1/4 ET goal.
Extremely well done doing something similar to my car in the profile pic but with procharger There is now way you suspect that nova of having 1600 if you take off the parachute lol sneaky sneaky lol love it
Awesome..cant imagine even 1000 on the street without independent susp. Am using the 276/60/15 MT Pro radial and lose the tire at 700 whp on typical street pulls.
Beautiful Car? I'm doing a 441 sbc in my 73 with twins. How did you get the downpipe out behind the tire? I'm using 3" and it looks too tight on the drivers side! Thanks
Is the body side molding original? I like it but don't recall seeing it back in the day. NOTHING says 6-cylinder like body side molding and/or mud flaps with curb feelers 🙂 Nice work!!
With you guys known a lot about turbos I have a question for you I have a 21 Infiniti Q 60 with stock turbos and an aftermarket Intercooler what should the temperature run like ambient temperature or above or below? No I also have an auxiliary second intercooler pump that I just installed and the temperature that I’m reading off of my Jb4 tuner box and it’s about 7° above ambient temperature. Does that sound normal for this kind of set up? Thanks for your time Brian.
3800 pounds ? My 66 Chevelle SS weighs 3200 lb with me in it . Full frame and does 5.5 sec in the 1/8 mile with a built small block 327 making 450hp , Lakewood Blow Proof bell housing, M-21 Muncie 4 speed , 12 bolt posi . Pulls both front tires off the ground, Screams to the moon at 11,000rpm .
@@lcrperformance , I got a 74 Nova , Both Bumpers shorten and about 50 pounds removed, no inner front fenders , built 327 , aluminum intake, 750cfm carb, MSD distributor and multi-spark box, Stainless Steel Headers, SFI Certified flywheel, 11 inch clutch, M-21 Muncie 4 speed , 12 bolt posi rear end with traction bars , rear mount battery and rear mount Radiator , opposite open hood , bucket seats, No rear seats . Yes , Radiator is in the trunk !
@@lcrperformance I think the Summit Midwest Drags is the only one that still has some open spots, but DW, RMRWs, MoM, SS, KOTOR, etc. are all sold out already.
Lol ..I'm pretty sure everyone's going to know how fast the car is with a parachute and beadlocks...so the sleeper thing is blown....sweet car though and I do love the look....
@@lcrperformance monster trucks are 1500hp and 10,000 pounds and run powerglides. Dragsters have also been running them for ever. They are extremely durable and can easily handle up to 3500hp.
Nothing says sleeper car like a parachute!! Sweet build
And a big ass hood too !!! LOL
Or bull horn's..
That's a bad ass machine
Thanks!
Been drag racing forever , learned something on this video , the sickest part is this actually looks like a true street car , much respect to all that had a hand in this build!!
Appreciate it!
I reconize this car 🤔🤔 Beautiful work on it! hopfully we can run it back soon!
It’ll be back out shortly 😏
Amazing build. Love seeing this car out on the track.
Well produced video too
Thanks!
If I had 6k for a transmission I would buy a house. Your car is crazy. I think your goals are in line with what you have assembled.
i live in a house that costs around 6k do not recommend
Long way from a sleeper , my pop told me to always listen to a car no matter what it looks like , Cam , stall , tires out back , sneaky sneaky!! 🤣💯👍✌️
;)
Just wow, wow and more wow. Fantastic ride. Absolutely killed the sleeper look.
Thanks, appreciate it!
Love the steelie look wheels with the center hub caps.
Awesome thanks for the time and effort. Best of luck. Great endeavor.
Thanks, appreciate it!
Nova's look better than Chevelle's
A sleeper with a parachute🤣
You know.
and tubs, and beadlocks, the big hood dont help either
Absolutely beautiful Nova, show quality car…
Appreciate it!
Wicked car and love the dogdishes ..... looks like a real streetfighter
Thanks Rob, appreciate it!
Well done Guys. Everything about that car is absolutely amazing and very well thought out. One of the nicest I have ever seen. Thanks for sharing
Appreciate it, stay tuned for more updates!
A SUPER BUILD! LOOK FORWARD To seeing it run @ "Sick Week" & other "Drive & Drag Events!" The car is REALLY CLEAN! LOVE IT! Thank You, J
Thanks, appreciate it! Lots more footage coming shortly. Stay tuned.
Beautiful Nova , nice Pro Copo look !!
Thanks!
I will say the tilt steering will not last it will break on the track nice thought-out work I like it
I've had both, chevelles and novas. They both look awesome too me
Superior job buddy. This motivates me to get mine going...thanks
Looks great. My ‘72 Prostreet is also powder coated Weld Prostars with adapters to mount those same dog dish caps.
Great looking car!
This build is a Wolf in a factory suit.
Thanks, make sure to stay tuned! Big things coming soon 😏
That’s what I was thinking the car is awesome but 200 mile an hour in a flying brick man you got some balls
Car is SICK, and a great road map for my own 73 shitbox Nova!
Why is it sick?
Cool build. Love the sleeper look. The black hood with the tall cowl induction kind of spoils the sleeper look. Have you considered putting on a low profile intake like a Holley low ram with a front throttle body? I think this might allow you to get rid of the big cowl. A short cowl might still be needed. Paint the hood body color and this thing will really fool a lot of people! Hope you have lots of fun with this. I will look for you on drag week this year! BTW, that 5.08 1/8th ET should put you pretty easily under your 7.99 1/4 ET goal.
Changes coming very soon. Stay tuned !
If you go over 150 mph a parachute is a must under NHRA rules I know had to add to my car
Extremely well done doing something similar to my car in the profile pic but with procharger There is now way you suspect that nova of having 1600 if you take off the parachute lol sneaky sneaky lol love it
Your car looks great! Thanks!
Everytime he says uhm,.take a shot
A video of a 1600 horse car and we never hear or see it running.........great idea
Lots of content coming, stay tuned!
Damn, I love this build! Great job!
Appreciate it, thanks!
Mmmm. Side Chick… seems I heard that on an FG, a racing boat vid. his latest boat.….
Looks like a beast. 🤘
That’s a killer Nova !!! Bad ass.
Thank you, appreciate it!
Nice build ! Cool looking car !
Thanks!
That's one beautiful Nova!
632 or sonny lenard 700 inch bullet...keep going ultra nice car.
Sick looking sleeper!
Love it, looks awesome
Thanks!
Incredible test drive, man that thing is fast, great rolling shots too, beautiful winding road, where was this at?
Nice damn job..some of us dream of these cars...AWSEOME
Thanks, appreciate it!
Super sick
Thanks, stay tuned for updates!
Sweet ass Nova nice job
Appreciate it!
Awesome..cant imagine even 1000 on the street without independent susp. Am using the 276/60/15 MT Pro radial and lose the tire at 700 whp on typical street pulls.
Its a lot of fun! Make sure to stay tuned for more footage!
Clean and fast. Very nice.
Appreciate it!
Beautiful car, sweet build.....you guys twinning with hat backwards 😅
Love it! Beautiful car!
Thanks, appreciate it!
Exceptional Masterpiece
Well Done Men !!
Thanks, appreciate it!
Nice work
Thank you!
Beautiful Car?
I'm doing a 441 sbc in my 73 with twins.
How did you get the downpipe out behind the tire?
I'm using 3" and it looks too tight on the drivers side!
Thanks
Hey there, this turbo kit has since been sold and a new one will be fabricated shortly! We will have videos going over everything, stay tuned!
@@lcrperformance ok thanks. Was just curious if the tires hit when turned. Thanks !
Can u show how u secured the hub caps. I wanna do this with my welds
Classified ;)
Just subbed! Love rhe build. I have a chevelle wagon sleeper. BBC na flat hood , w original dog dosh on Weld wheels painted body color
Awesome!!
👍🏼Super freakin sleek y’all 🤙
Thanks, appreciate it!
Is the body side molding original? I like it but don't recall seeing it back in the day. NOTHING says 6-cylinder like body side molding and/or mud flaps with curb feelers 🙂 Nice work!!
Yes it is original. I had a 1971 with a 307, same trim
You guys got any more cars that you could do vids on?
As warmer weather approaches we will have many more cars coming to the channel!
@@lcrperformance Hopefully your subscribers will have grown by then!I enjoyed your content and wish you the best of luck.
@@Gamerandcoder Thanks, appreciate it!
❤ just fell in love the nova bud
With you guys known a lot about turbos I have a question for you I have a 21 Infiniti Q 60 with stock turbos and an aftermarket Intercooler what should the temperature run like ambient temperature or above or below? No I also have an auxiliary second intercooler pump that I just installed and the temperature that I’m reading off of my Jb4 tuner box and it’s about 7° above ambient temperature. Does that sound normal for this kind of set up? Thanks for your time Brian.
I can’t believe that much motor and twins doesn’t make 2,000+hp
this is so well done!!!!
Thanks , appreciate it!
Great build!
Thanks, stay tuned for more!
No start up….. no smoke….. damn
Awesome car, the best part... its local.
Appreciate it!
With all that work and you chose the bench seats?
Prestigious 💯
Thats a Bad Unit, love it.
Thanks!
3800 pounds ?
My 66 Chevelle SS weighs 3200 lb with me in it .
Full frame and does 5.5 sec in the 1/8 mile with a built small block 327 making 450hp , Lakewood Blow Proof bell housing, M-21 Muncie 4 speed , 12 bolt posi .
Pulls both front tires off the ground,
Screams to the moon at 11,000rpm .
You bet! All steel, all glass, twin turbo big block with a turbo 400, bench seat, cage, 9” etc.. she’s a heavy girl.
@@lcrperformance , I got a 74 Nova ,
Both Bumpers shorten and about 50 pounds removed, no inner front fenders , built 327 , aluminum intake, 750cfm carb, MSD distributor and multi-spark box, Stainless Steel Headers, SFI Certified flywheel, 11 inch clutch, M-21 Muncie 4 speed , 12 bolt posi rear end with traction bars , rear mount battery and rear mount Radiator , opposite open hood , bucket seats,
No rear seats .
Yes , Radiator is in the trunk !
Should gone for a drive and filmed it be cool as f bro
Coming soon, stay tuned!
I know damn well he makes way more than 1600hp
;)
Did you guys get registered for any Drag N Drive events this year?
We are not currently.
@@lcrperformance I think the Summit Midwest Drags is the only one that still has some open spots, but DW, RMRWs, MoM, SS, KOTOR, etc. are all sold out already.
4.99@150 ish pretty easy, 170/200 - not likely. Not at that power/weight at least. Super nice car though!
Currently undergoing updates. Stay tuned!
Well done!
Appreciate it!
Killer build😎
🔥🔥🔥🔥🔥
Love it
Will it squeal the tires ?
dart block?
Yes, Dart Big M.
Lol ..I'm pretty sure everyone's going to know how fast the car is with a parachute and beadlocks...so the sleeper thing is blown....sweet car though and I do love the look....
What front lip is that if you have a source?
Highly modified Glasstek
What is @ comun price for car like this in EUA?
Im not sure
NO FREAKIN TEST DRIVE????
Coming soon! Stay tuned!
What a Beast!!!!
Thanks!
I live in Minnesota where is that race shop
We are located just outside of Winnipeg, Manitoba Canada
what times does it run?
Man!!!!😍😍😍😍
Who makes that hood?
Harwood
Nice car. But no sleeper...actually just put some race wheels on it and roll on
Has "race wheels" on it. Weld Draglites
Too bad you didn't run the car. Didn't seem like a crowded road.
Will have footage coming soon!
Whats the rear wheel specs?
15x10 w/3.5BS.
@@lcrperformance Is it stock suspension in rear or back halfed
@@infamousnova Mini tub with a 4 link.
@@lcrperformance ahhh ok
Toutes les chevy mériterait la transmission tesbrute celle de rubit et la personne pour te suivre 🙏🤲🇫🇷🤘
Basically the same setup on another car made 3,100+hp
It sounds like it needs a power glide
Would never live at these power levels and weight.
@@lcrperformance monster trucks are 1500hp and 10,000 pounds and run powerglides. Dragsters have also been running them for ever. They are extremely durable and can easily handle up to 3500hp.
sweet ...
More like a “Supernova”
Not even a fire up ?
Not a bad way to spend $100,000 😁🇺🇲👍
Keeeeep going ;)
@@lcrperformance 😁😁👍👍😂😂🇺🇲
tired of the "sleeper" badges .no such thing as a sleeper anymore.twin turbos not fooling anybody.having said that awesome car!
Cool car. I've got a 2 door post sleeper on my channel if anyone want to buy one. 😎
i caught a dent on passenger side below window
thanks !!!!
hard
!😄...Sleepers have No 'Chutes'!!..
Nothing that can’t be taken off in 20 seconds 😉
@@lcrperformance just 'Teasing'..Beautiful 'sleeper'!
No burnout
No drive time? WTF? No fly bys? SMH
Coming soon, stay tuned!