Tips assembling Carter P4594 Fuel Pump Car Boat Truck Classic Cars Muscle V8
HTML-код
- Опубликовано: 6 сен 2024
- Tips assembling installing install assemble put together Carter P4594 Electric Electronic Fuel Pump. Make sure you buy it from an authorized Carter dealer. I got mine from Summit Racing online in McDonough GA. Hear it with new exhaust • New 2.5" Exhaust with ...
Amazon Link amzn.to/3XMaogg
Summit Racing Online Link www.summitraci...
Specs for this fuel pump
Flow Rate 50gph / 190lph
Fuel Pressure 5-9psi
Fuel hose needed 3/8"
1/4 in. NPS inlet and outlet with 3/8 in. hose barb fittings.
I am installing this pump because the "buzzing" you heard on previous vidoes of my 1966 Plymouth Fury was my Holley Blue external fuel pump in the rear of the car. It was installed correctly but is still too loud for my taste. Everybody complains about this pump (even though it is NOT cheap.) I am going to try this Carter P4594 pump and compare.
1966 Plymouth Fury III with 360cid 5.9L V8. The engine in this car is a 2000 Dodge Dakota 5.9L V8.
Tips and help for you if you are doing exhaust on your classic car truck jeep suv
Where to buy the stainless exhaust kit amzn.to/3kuuuNF
Lap Joint Exhaust Clamps amzn.to/3wefcPN
U Joint Clamps amzn.to/3XJK3zf
Mechanic Jack Stands amzn.to/3HrE8tz
Where to buy 2.5" Flowmaster 71226 Mufflers amzn.to/3kqMoAR
Kobalt Impact Driver Set amzn.to/3D2NbhH
Join this channel to get access to perks:
/ @horsepowerhouse
Merch! shop.spreadshi...
--------------------------------------------------
Feel free to support the channel via PayPal. paypal.me/hors...
---------------------------------------------------
Feel free to post comments below. We love to hear from our Peeps.
@horsepowerhouse on Facebook
@rdavidharrisjr on Facebook
---------------------------------------------------
RUclips / horsepowerhouse
RUclips Channel 2 / horsepowerhouse20
Facebook / horsepowerhouse
Facebook / motocrossacademy
Facebook / rdavidharrisjr
eBay www.ebay.com/s...
Amazon www.amazon.com...
Twitter / horsepowerhouse
Instagram / horsepowerhouse0
Email roswelldirtrider@aol.com
![ARGENTINA vs. CHILE [3-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 7](http://i.ytimg.com/vi/De3AWmXzhuA/mqdefault.jpg)
More videos about this Carter fuel pump: ruclips.net/video/36Ijpmwh7jw/видео.html
ruclips.net/video/deTAaG8XOcU/видео.html
ruclips.net/video/zKpBHcOU2VY/видео.html
I just installed this on my car and boy is it quiet! I mean really quiet compared to those expensive fancy Holley and Edelbrock pumps. HIGHLY RECOMMEND!!!!
Hear it with new exhaust ruclips.net/video/YC7neaKlFXE/видео.html
And a lower amp draw than the Holley pumps as well.
Thank you so much I just need this video 🎉😂
Helpful video, P4070 is same form factor and kit.
Thank you for this video
Got many more.
Thanks for the video it helped a lot.
I'm only getting 4-5 psi. Ne line and filter after the pump. Mounted 6 inches from tank and about level.
Needs to be mounted below the fuel tank, for best results. These pumps are gravity-fed.
If your car runs fine, don't worry about it.
Can i flip the mounting bracket upside down and bolt the pump to it?
Sure. Make sure you run the ground wire correctly.
The hose connections are terrible. They bottom out (not tapered) in the pump without putting tons of teflon on them. I used 5/16 barbed hose fittings that were tapered!
Mine were fine. Nothing abnormal about them.
If you bought it from anywhere other than an authorized dealer, anything else could be questionable about it.
And you said yours did not come in the original box? There's your answer right there. Yours was imported and aftermarket.
Is it a self-priming pump?
The one I installed is but it took a while to get the fuel picked up.
You have to mount it as low as possible vs your fuel tank. All of these pumps are gravity-fed. If you mount them too high they won't work properly.