Hi I just want to let you know that I am already finish working on your design for my own rc drift and it works amazing the control are easy,the car is stable for me as a absolute noob on drifting mini rc just want to let you know that I am really happy with the final result thank you so much and keep up the goodwork
Looks very nicely built, so I ordered one. This looks like a nice little project. You are missing some parts from your list like the shafts, ESC and motor. Thank you for sharing!
@@zeusgarage4368pulled an all bnighter getting the chassis set up, electronics tomorrow. I have to say, the design quality is insane, this car feels so sturdy. Can’t wait to finish and get the body on.
You are really great. I just finished assembling my ... fantastic. I just found an error in the necessary parts list..we need 8 bearings inner 3mm, outer7mm, thickness 2.0mm, not 4 as you say. Thanks for sharing your project.
Amazing! I bought the 3d files and ordered parts on Ali. Looking forward to printing and building! What a great alternative to the expensive chassis available on the market. Do you know if you can connect a standard Servo to a miniz board?
Hi. First Awesome build.🔥 i ordered it.😍 but one question. Can you share the settings of Cura? I have an anycubic Vyper but the the standard settings are not that good for it. So i‘d like to try with your settings.
Congratulations, it is amazing! will it work with a standard 7500kv brushless motor kit for k989? i'm planning to build 2 of them and it is much cheaper than the leopard 12000kv kit.
A high-speed motor is not required. Rather, a 3800k motor is better and I am using it. www.aliexpress.com/item/32967723625.html?spm=a2g0o.9042311.0.0.27424c4dFSCyUH
Do you have some photos showing the correct orientation of the parts on the print bed? I've just downloaded the parts, and can't wait to start printing!
Hello my brother zeus,i wanna ask about print result,is that possible if i printed on base resin 3dprint,thx a lot brother,appreciate all your video about rc 3dprint from ,1/24 to 1/10 scale
I am very sorry for the late reply. I was very busy with the garage construction work. Resin is not recommended as a RC part because of shrinkage and bending.
Hi, on your 3d print file for sale, on the list is an mr73 bearing . 3x7x2? Is this correct or it should be 3x7x2.5mm bearing? Thank you. Me and my friend just purchased the stl. File. Also this bearing is not on the link but just different sizes, I’m seeing mr73 sizes 3x7x2.5 and 3x7x2 so I’m confused…Hope to here from you on this. Thank you.
@@zeusgarage4368 thank you, it’s just that some links don’t work anymore ang this is the hardest bearing to find of them all as mr73 is showing both 3*7*2 /2.5… I’m glad I ordered the correct spec 😁 thank you!
네 3d프린터로 출력할 수 있는 .STL파일들입니다. pc에서 다운로드 받은 후 직접 출력하시거나 출력 대행 업체에 파일을 보내준 후 의뢰 하시면 됩니다. 출력 대행업체는 무수히 많은데.. 네이버쇼핑에서 '3D 프린팅 출력' 으로 검색하면 많이 나옵니다. 그 중 선택하셔서 의뢰 하시면 됩니다.☺
Hi. I have an Issue. I bought the Kit for 3D print It by myself for 10$, but my Computer still broke. It is Possible to recieve the files maybe? Best Regards.
hi @@zeusgarage4368 . Thank you for the reply. Can I ask a question about this Necessary Parts -(Diameter 2mm Shaft(직경 2mm 샤프트) 9mm-2pcs, 14mm-4pcs, 20mm-1pc, 30mm-1pc ) The 9mm-2pcs means 9mm diameter shaft 2pcs? I am sorry but confused about this. I hope you could help me. Thank you
I am very sorry for the late reply. I was very busy with the garage construction work. www.aliexpress.com/item/1005004095306649.html?spm=a2g0o.order_list.order_list_main.47.21ef140f88cdwl
Love you content absolutely awesome!! I have a 3d printer am goin to try and replicate this 💯 check my drift track am building on my channel my friend! This would be awesome on my track 🚗💨💨💨
Hi
I just want to let you know that I am already finish working on your design for my own rc drift
and it works amazing
the control are easy,the car is stable for me as a absolute noob on drifting mini rc
just want to let you know that I am really happy with the final result
thank you so much and keep up the goodwork
Thank you. I will prepare a lot of ZRD-1 related updates and videos.🤗😄🤗
어렵게 디자인하셨는데 이 모든것을 공유하신다니 대단하십니다 선생님. 세세하고 친절한 매뉴얼 잘 봤습니다!
감사합니다.🤗
Looks very nicely built, so I ordered one. This looks like a nice little project. You are missing some parts from your list like the shafts, ESC and motor. Thank you for sharing!
Sorry for the late reply. First of all, thank you for purchasing. The shaft is written in the necessary parts above.😊
I've been waiting for this for a long time can't wait it's amazing
Thank you.🤗
Check out [ZRD-1]1/24 RWD drift car project-6(1/24 후륜드리프트카 개발기-6) : ruclips.net/video/XR5vepv7umA/видео.html
Just got my files, now I need to order hardware. Pretty excited! This is really well made
Thank you for your purchase. Build it and enjoy drifting.🤗
@@zeusgarage4368 what's the difference between the upper deck parts? My guess in for fitment of the shell.
@@stinky5535 You can choose depending on the size of the battery or receiver installed under the upper deck.
@@zeusgarage4368pulled an all bnighter getting the chassis set up, electronics tomorrow. I have to say, the design quality is insane, this car feels so sturdy. Can’t wait to finish and get the body on.
@@stinky5535 Thank you. Once assembly is complete, it is a great pleasure to be able to drift in the living room.🤗
Thank you ideas for battery storage.
You are really great. I just finished assembling my ... fantastic. I just found an error in the necessary parts list..we need 8 bearings inner 3mm, outer7mm, thickness 2.0mm, not 4 as you say. Thanks for sharing your project.
Thank you. Number was corrected.Hope you enjoy drift after completion.🤗☺🤭
Amazing! I bought the 3d files and ordered parts on Ali. Looking forward to printing and building! What a great alternative to the expensive chassis available on the market.
Do you know if you can connect a standard Servo to a miniz board?
Thank you for your purchase. I used mini servo at mini-z like this way : ruclips.net/video/E2UxZbhEefU/видео.html
I can't say it often enough, it's amazing, so nice 😍
Thanks a lot.🤗
ESPECTACULAR!!!!
UN GENIO!!!!
GRACIAS!!!!, Hoy mismo descargo los stl.
Esperando siguiente proyecto!
Muchas gracias.
Disfruta de la deriva.🤭
can't wait to try this out🙂🙂
Thank you.☺
와우 드디어!
☺🤗🤭
너무 대단하십니다.. 혹시 총 부품값이 얼마 들으셨나요?
감사합니다. 정확하지는 않지만 알씨 기자재 제외하고 1대당 만원정도 들어가는것 같습니다.
Good work
Thank you.😚
Hi. First Awesome build.🔥 i ordered it.😍 but one question. Can you share the settings of Cura? I have an anycubic Vyper but the the standard settings are not that good for it. So i‘d like to try with your settings.
Thank you. Leave email addresss on my facebook(link is on this channel home). 🤗
@@zeusgarage4368 hi I can‘t find. Your Facebook.
@@TheFratellodiverso1 I sent cura profile on cgtrade .
제우스님 플라토 니퍼로 금속 자르면 위험합니다..저도 나사자르다 제 얼굴쪽으로 칼날이 끊어져 튀더라고요 다른니퍼로 금속 자르시길..
촬영을 위해서 연출하는 것도 있습니다. 안전사고가 일어나지 않는 것도 작업의 중요한 부분입니다. 감사합니다.🤗
Congratulations, it is amazing! will it work with a standard 7500kv brushless motor kit for k989? i'm planning to build 2 of them and it is much cheaper than the leopard 12000kv kit.
A high-speed motor is not required. Rather, a 3800k motor is better and I am using it. www.aliexpress.com/item/32967723625.html?spm=a2g0o.9042311.0.0.27424c4dFSCyUH
servo: www.aliexpress.com/item/4000079680151.html?spm=a2g0o.productlist.0.0.534c64bfHcnoyd&algo_pvid=2b07a57d-6964-4928-9cf0-1c6e2054bed4&algo_exp_id=2b07a57d-6964-4928-9cf0-1c6e2054bed4-0&pdp_ext_f=%7B%22sku_id%22%3A%2210000000208538687%22%7D&pdp_pi=-1%3B5.23%3B-1%3B-1%40salePrice%3BUSD%3Bsearch-mainSearch
esc : www.aliexpress.com/item/1005002553742930.html?spm=a2g0o.productlist.0.0.5c6647e16P7DdE&algo_pvid=c788d149-8efb-485b-9f1c-6b37abfcaed0&algo_exp_id=c788d149-8efb-485b-9f1c-6b37abfcaed0-19&pdp_ext_f=%7B%22sku_id%22%3A%2212000021114531516%22%7D&pdp_pi=-1%3B12.0%3B-1%3B-1%40salePrice%3BUSD%3Bsearch-mainSearch
Do you have some photos showing the correct orientation of the parts on the print bed? I've just downloaded the parts, and can't wait to start printing!
Leave email addresss on my facebook(link is on this channel home).
@@zeusgarage4368 i don’t have a face book page, can I sent you a private msg on youtube instead?
@@ripmax333 E-mail me at : jaewuku9@gmail.com
Hello my brother zeus,i wanna ask about print result,is that possible if i printed on base resin 3dprint,thx a lot brother,appreciate all your video about rc 3dprint from ,1/24 to 1/10 scale
I am very sorry for the late reply. I was very busy with the garage construction work. Resin is not recommended as a RC part because of shrinkage and bending.
yeaaaaaa dude I bought it thanks
Thanks a lot.🤗☺🤭
Gran trabajo!!, ya tengo los archivos.
Un saludo.
Muchas gracias.🤭
Hi, on your 3d print file for sale, on the list is an mr73 bearing . 3x7x2? Is this correct or it should be 3x7x2.5mm bearing? Thank you. Me and my friend just purchased the stl. File. Also this bearing is not on the link but just different sizes, I’m seeing mr73 sizes 3x7x2.5 and 3x7x2 so I’m confused…Hope to
here from you on this. Thank you.
3*7*2 bearings.( parts list is above). Thank you.🤗
@@zeusgarage4368 thank you, it’s just that some links don’t work anymore ang this is the hardest bearing to find of them all as mr73 is showing both 3*7*2 /2.5… I’m glad I ordered the correct spec 😁 thank you!
How much final gear ratio? and why you choose it?
Hi mate I need A litel help with this project how i can talk to u?
Hi, Is this the regular 2mm diameter shaft used in Tamiya mini 4wd chassis?
Thank you
The shaft diameter is regurar 2mm. But I don't know the shaft of Tamiya mini 4wd chassis is 2mm.
안녕하세요, 제우스선생님! 링크에 판매중인 건 3D print file인가요? 혹시 구매 후에 어디서 print 가능한지 알려주실 수 있나요?
네 3d프린터로 출력할 수 있는 .STL파일들입니다. pc에서 다운로드 받은 후 직접 출력하시거나 출력 대행 업체에 파일을 보내준 후 의뢰 하시면 됩니다. 출력 대행업체는 무수히 많은데.. 네이버쇼핑에서 '3D 프린팅 출력' 으로 검색하면 많이 나옵니다. 그 중 선택하셔서 의뢰 하시면 됩니다.☺
넵 갑사합니다!@@zeusgarage4368
Hi, anybody has a link on were to get the M2 nut(3.5mm wide x 1.5mm thick)
Thanka
Hi. Do you have some stl for this beauty ? 😍😍
I am very sorry for the late reply. I was very busy with the garage construction work. Download site link is above.😂
Hi. I have an Issue. I bought the Kit for 3D print It by myself for 10$, but my Computer still broke. It is Possible to recieve the files maybe? Best Regards.
If you purchase from cgtrade, you can download it repeatedly from that site.
Where can I order the parts you have listed in the description? links are bad.
I just tested all links and they all work. Which link doesn't work?
Tôi sẽ bắt đầu công việc vào ngày mai. Cảm ơn đã chia sẻ mọi thứ
Cám ơn rất nhiều🤗
Cố gắng hết sức xem có coppy theo được không 😆😆😆 nếu không coppy nổi tôi vẫn muốn trải nghiệm tác phẩm của bạn
is there a 3d printing guide for this i printed one of every part but hard to figure out
Please refer to the video above for 3D printing, and the link below will also help.
ruclips.net/video/SiPZzuLaowU/видео.html
hi zeus...do you have some links of the necessary parts where i can get them? Thank you
I used my old RC parts. But you can purchase them in Aliexpress.
Transmitter/receiver-RC6GS, Gyro- AFRC V3.
hi @@zeusgarage4368 . Thank you for the reply. Can I ask a question about this Necessary Parts -(Diameter 2mm Shaft(직경 2mm 샤프트)
9mm-2pcs, 14mm-4pcs, 20mm-1pc, 30mm-1pc ) The 9mm-2pcs means 9mm diameter shaft 2pcs?
I am sorry but confused about this. I hope you could help me.
Thank you
It means 9mm length(all shaft's diameter is 2mm). Thank you.
Oh I see. Thank you for the tip.
Hi I am looking forward to get one but idk how to get the motor can u pls give a link to the motor bldc
I am very sorry for the late reply. I was very busy with the garage construction work.
www.aliexpress.com/item/1005004095306649.html?spm=a2g0o.order_list.order_list_main.47.21ef140f88cdwl
I can't get the file, can anyone give it to me, please
Gear yang satunya kok tdk terpasang di gear box
Hi
I’m want buy your chassis
But can’t pay because I’m from Russia
Can I pay this on another site ? or to you via cryptocurrency
Leave a message on my Facebook. facebook.com/zeuskugarage
Hi Zeus, I dont have a 3d printer. Can I Contact with you to get the Chassis? I Will pay for it
I'm very sorry. I could online 3d files only.😢
Sudah siap ka bossku
Thank you.🤭
I need a STL file
i got a question zeus garage how do you turn on your esc?
i got the same esc as yours and i cant seem to find the on and off switch
@@shin7266 Yes. It has not switch. But I made a switch. Refer ruclips.net/video/L7d_ukMEiOw/видео.html
Indonesian version video please
I am very sorry for the late reply. I was very busy with the garage construction work. I can only support english.😂
Which gyro do you use?
I used AFRC V3 gyro.
does this have room for a FS-BS6 reciever?
Yes. Enough space. ☺
@@zeusgarage4368 great, I love the ability to print my own replacement parts rather than wait for orders
@@heavenisalie Yes, that's right. And another thing is, you can make as many chassis as you want.
@@zeusgarage4368 as long as I can afford the electronics lol
@@heavenisalie In my case, I make several and use them as a 1/24 display model. As for the rc part, I have installed only about two units.☺
Cant get to that print quality with my printer. Suports are kiling me. 😭
What kind of your printer?. I printed all parts with my sapphire plus. ruclips.net/video/fEnPn-03iow/видео.html
I will record and upload the tips for printing out the parts that need support soon.
I use simplify 3d
I have a geetech a10
Check out Tamiya TT02 RWD conversion with 3d printer : ruclips.net/video/QUsKKTEY4Us/видео.html
Love you content absolutely awesome!! I have a 3d printer am goin to try and replicate this 💯 check my drift track am building on my channel my friend! This would be awesome on my track 🚗💨💨💨
You track is awesome. I also have plans to make my own tracks. Thanks a lot.🤗
@@zeusgarage4368 thank you 🙏🏼 can’t wait to see your track build! Everything you do is off the scale 💯 keep up the grate work ZEUS 😎💪🏼