HIGH PRESSURE DIE CASTING INTRODUCTION ( PART 1 )
HTML-код
- Опубликовано: 4 окт 2024
- IN THIS COURSE YOU CAN LEARN BASIC OF HIGH PRESSURE DIE CASTING.
HPDC hydraulic system:
steadydiecasti...
SDS Website:
steadydiecasti...
SDS Die Casting Online store:
manage.instamo...
SDS You tube channel:
/ @hpdcpathshalasds
SDS Facebook page:
/ keeplearningtilldeath
SDS Facebook group:
/ 561495194446999
Keep learning till death
9549867867
steadydiecastingsolutions@gmail.com
Si I have a doubt. Can we use 1 Deg draft for Inner Core/Core(Moving part) with the core depth of >150mm? And the material is Al-alloy.
Good explanation bro.
Nice video.... Very helpful... Basic process defect aur unka control on shop floor par bhi video banaiye.... Jo maximum person dekhna chahte hain.... Casting defects on shop floor during process...
Good introduction to machines. Thank you for the video
Really wonderful video. Everything is covered. Sir you are great.
Thanks, keep sharing
With due respect Sir I just want to suggest something to you before making videos please just make an index where you should tell what are the topic or point you are going to discuss so it's very comfortable for us. Like our mind set-up according to that.🙏
Sure
Thank you sir for valuable basic information regarding HPDC. It is very useful.
I am eagerly waiting for part 2 and part 3.Please release part 2 and part 3 also🙏🙏
Immediately check it out first online store for die cadting.
steadydiecastinngsolutions.stores.instamojo.com/
Good
thank u sir,our req is.
1)pls. make vedio on how to increased life of plunger tip and shot sleeve.
2)how to optimize spray (die cote) means how to reduce number of spray pipe after the spray head.so we maintain the die temp.
Immediately check it out first online store for die cadting.
steadydiecastinngsolutions.stores.instamojo.com/
steadydiecastinngsolutions.stores.instamojo.com/product/176187/pq2-calculations-and-worksheet/
Yizumi machine ke painl ke bare me jankari.180 ton ka
In our machine there is only one tall cylinder instead two cylinders of intensifier and accumulator ?
Respected sir plz tell about total maintenance failures and there remedy....
Bhut badiya ji MII
Top Indian machine manufacturers?
Sir die close ke bad fix core in & after solidify fix core out then die open
Yes
सर सिलेंडर में कितनी किलो गैस भरी जाती है,120 टन से लेकर 420टन तक बताए प्लीज
Thankyou so much sir
Nice video i just wanted to know what is average efficiency of pressure die casting shop and rejection and rework percentage.
Your guidence will be highly appreciated.
Thanks for watching video. You should measure effectiveness besides efficiency, rejection would be 2% including off shot and rework should not allowed.
Effectiveness should be more than 85%
Keep sharing.
Buckles kiss process se bante hai
Die temperature how to standardization.min to max value set
Why N2 use Accumulators?
I need to 1 more video for check list
Nice
Waiting for second part ...
Immediately check it out first online store for die cadting.
steadydiecastinngsolutions.stores.instamojo.com/
steadydiecastinngsolutions.stores.instamojo.com/product/176187/pq2-calculations-and-worksheet/
Why pump pressure is same in different tonnage machine
Hydraulic pump pressure same but hydraulic cylinder size change as machine tonnage increase.
@@hpdcpathshalasds why motor hp increase but pressure is same
Keep learning till death ❤️
Sir which one is holding furnace.??
In which we are holding molten aluminium.
So sir after melting we use another furnace to hold it.?? And sir which one is called feeder in die casting.??
Sir one qn. I have regarding that I searched alot but I couldn't get. In PDC the how much maximum toonage machine available throughout the world ?
3500ton
Om Ganesha namah🙏
Om ganeshay namah
Dear sir please make a video for die parts and their materials
Sure
Immediately check it out first online store for die cadting.
steadydiecastinngsolutions.stores.instamojo.com/
एक विडियो डाई के पार्ट की भी बनाइये सर।
Sure
Thanks I will wait
Koun si Campania me hai
Playlist bnaiye sbhibka
Koi job h kahi pe GDC casting department and melting department supervisor ke liye
Please sir tub support casting. M crack nhi ruk nhi h
contact us @919549867867
supar
Sir Electrical pannel baray jankari dena
Ok
@@hpdcpathshalasds sir machine ki chal dhere ho gai he apne aap rapid machine
120 ton ke bare me bato na sir,,,all setting,,and display ,,and valave
Immediately check it out first online store for die cadting.
steadydiecastinngsolutions.stores.instamojo.com/
Watch in 1.25x speed.. thanks me later
Can we get pdf
You can visit our website
www.steadydiecastingsolutions.com
Need English explanation
400 LK machine information please sir give me
Check out my product on Instamojo:steadydiecastinngsolutions.stores.instamojo.com/product/141261/high-pressure-die-casting-machine-setting/
@@hpdcpathshalasds thanks sir
You should teach in more confident voice not in this kind of sleepy way.