How to Change Windscreen Wiper for Honda Civic
HTML-код
- Опубликовано: 29 сен 2024
- Learn how you can change the windscreen wiper for Honda Civic 2007. This video is also good for other Honda Civic model too. The video will show you a detail instruction of how to make a replacement of the rubber blade.
The video made me aware of any obstacles and at the same time assured me how easy the job really is.
Oddly enough, seeing the struggle was one of the most useful parts of this video. Thank you so much for not sugar coating it. It gave me the confidence to go back out and wrestle my windshield wiper blades into submission and finally achieve success. Thank you so much for not editing the struggle out!! Very useful video 👍🏾👍🏾👍🏾👍🏾👍🏾
Wait till you want to build in a Bluetooth adapter or another radio unit 😄
the Japanese are very good at making simple thing super difficult 😠
Thank You! I couldn't figure it out on my own and was afraid I was going to break the plastic pieces. Your video gave me just the info I needed - Thank You. Purchased mine from the dealer for $5 each for my 06 Civic 4-door. Only thing different on my '06 Civic is I do not have the plastic caps you removed first. It looks like I have may have lost them and didn't notice, or the '06 didn't come with them. Again Thanks.
Thanks for posting this. It helped me in replacing the blades for my 2006 Honda. I bought the pair of blades for about $13.00 at my local Honda stealership.
thank you so much for the help, after whatch the video was so easy to change the plastics
These wipers were a pain in the Ass to change, Easier to change the water pump. lol None the less, This was a Good video..
Hi, great vid, what size is the generic rubber blade? The full wiper assembly for the civic can be avoided with this video cheers.
Would love to see a video on fitting a custom stereo/mp3 player into a 2007 I-VTEC Civic If you could.
Your a gem.
Wish I watched this before I tried myself, I snapped the cap :( Guess I'll go to a wrecker to get a another one.
Fyi, the the wiper housing for some civics is different in that there is a small square plastic tab that needs to be depressed near the housings mounting point in order to release the blade. square tab instructions are everywhere but if you are having trouble you may have the same style as in this video that just require you to pull the blade out.
NotaTrollTechRUS Ok. Glad someone commented on that. My 06 has the square tab on top.
The instruction in the book is wrong you don't squeeze the tabs you Need to pull it apart a little bit and push the cap out with out any tool
Yo why you upload this video blood?
😂😂😂😂😂
Really stupid design.
wtf honda? this turned into a project!
Thanks for posting this! I learned a lot! I learned that I'm taking my wife's car to Honda for this shit!
Could you tell me where you got your replacement rubber strips from as I'm currently looking into replacing my own. I've spoke with Honda and they only sell the flexi blade not the rubber strip. I've also looked into the BOSCH A420S blades but your way seems a cheaper and better option as there's nothing wrong with my wiper mechanism, the arms, covers or caps. Could you tell me the model number of the strips you've purchased or any help at all regarding the replacement.
Excellent! From a Woman who has struggled with it and following other videos. Watching your honesty struggling was reassuring to me and helped me persevere without thinking I was going to damage something. Cheers 👍
Damn design by Honda. I tried to different way to remove the cap without success. Your screw driver tip saved the day. Thanks.
But its Honda..... why is it complicated?
2 hr ago I broken ... AGAIN... that cover plastic,and now i see your video :) well... spare is on way,hope THIRD time will do it correctly :) By the way... orginal item nr. 76625-SNA-A02 for passanger side,76626-SNA-A02 for driver side
Radoslaw Martychowiec thanks for the part number Radoslaw. It will be useful for anyone who are looking to buy it :).
Does anyone have a Replacement part number for the blades?
Certainly agree with others who commented that it was most helpful seeing him struggle - and succeed - to get that darn cap off. With the original Honda wiper system you don't pinch the cap. The screwdriver works best.
Seeing your struggles helped me as I had the same issues as you. Thanks!
No-one wants windscreen wipers to fall apart whilst driving so the struggle to detach, speaks for itself. Well Done.
What are those! 3:49
Great video thanks.
😂😂
T-t-they’re called my sandals
Forget the screwdriver bub...just put a lil wd40 in there and both will come right off easily
would a pair of pliers work for squeezing removal?
Worked for my 2006 Civic FD, although one side snapped as it wouldn't budge.
Thanks for this video I was having trouble with the cover aswell
POOR design by Honda.
H Hoe exactly! even its front bulb replacement of my 2007 Civic when it got busted, i have to removed its front wheel first before i can replace and pop in its light bulb underneath!?? what a pain!! a Lovely and very Reliable car but poorly designed on other simplest of things. its wiper blades and a light bulb were Only replaced after 8 years!!! ...The Power of Dreams.
Those are aftermarket blades. The factory ones are 'easier' if you recognize the ancient design.
Now imagine doing this when you need a replacement in the winter time and your fingers are frozen playing with this. Those designing these things are in a nice warm environment.
Seriously what the fuck
Let’s over design wipers. I mean those j hook style everyone already figure out.
Bro, can you come to gemany and fix this for me? The pain is real… those things are just the WORST
Hearing click is such a successful feeling. I wish conception made a click noise so that we know if we’re fucked or blessed.
Thank you for posting. This was really helpful, including the comments.
You are welcome.
Thanks for the video I have problem removing the cap. After watching your video I am going to try again with a screwdriver thanks again btw the price is not bad at Costco when they have on sale so no need to place the rubber part.
I had just as much trouble as this guy did to get that end cap off! And I ended up breaking the plastic part that holds the clip on. Grrrrrrr. So now I have to buy a new end cap! Seems that I read elsewhere that you have to pry the sides apart instead of pressing them together, as instructed in the manual. Well I think we all deserve free new end caps for our wipers. So I have yet to try the driver's side.....
Autozone change the wipers for you for free if you buy from them lol
Too hard...it's not working ....correct !! love the commentary.
That makes sense. Mine don't have those cover pieces. I see why lol
Great help thankyou , did mine this morning and went sweet as a nut , probably would have totally destroyed them if i hadn't watch you video
Thanks for watching. Glad you like it. You could also just replace the blade instead of the whole wiper which is quiet expensive.
this is what a replacement process will look like for most people and not a one pop finish lol
Good clear video - I thought I would check before I tried it. Thank you, very informative.
Didn’t help me at all. My 2007 doesn’t have them blades
Thanks for the video. Unfortunately I couldn't remove those caps, so I resorted to removing the wiper blades still attached to the blade assembly on the car. The screwdriver into that blade assembly helped me a lot to replace the blade. This is really helpful.
Life saver 🙌
For anyone struggling with these like I was. What you have to do is slide them about 0.5mm forwards and then you should be able to lift them out. There’s a square section that sits in a track that gets wider if you push it forward
Still a good video years after i saw it first time, have this saved for every wiper change lol
Very complicated. Why Honda?
Honda........ They do things badly at times. What a chore. Many thanks for proving that I am not the only one who nearly burned their car after fighting with the wiper replacement. WTF HONDA?????? Extreeeeeeemely over priced parts. Thanks to this guy I now know where to get the only part that needs replacement. thanks heaps
Thank you for the video and it’s very useful. It shows me that the cap needs to be removed with a the screwdriver. I put a think rubber underneath the screwdriver in case it scratches the paint work.
I'm so glad mine weren't like that 😅
You need to practice before you make a video
10/10 on the BG commentary.. hahaha
Good video to include troubleshooting, too!
When the steering wheel is on the left side, they are called "windshield" wipers! :) We have to buy the whole wiper assembly in the U.S. since the 1990's.
Honda, Why???? You used the same oil filter on every Honda since 1988, why not use the same attachment like on my Accord, Easy and quick!
Haha, it took me like half an hour to remove the damn caps trying to follow the instructions in the manual. Good to see I'm not the only one who had trouble. Will try the screwdriver+cloth method next time.
You don't know the struggle. 😂
Thank you so much for this video. Honda really made this process very cumbersome.
Whoever engineer design that wiper blade assembly hates DYI people. Thnx 4 sharing.
stupid design by Honda they made every simple replacements part become very difficult among other Japanese brands
Trust the process…Easy as it sounds to change wiper blades it’s really a pain
This video is helpful if you want to replace the WHOLE wiper blade. Otherwise, you do not need to take the blade out to replace the RUBBER piece, you can slide the rubber piece out without take the whole blade off.
Hi, i don't have the 2 blade and the big part that covers them, where can i buy those also?
VERY helpful thank you
Squezze te bottom of the cap, and lift the top with your nails. Comes out easy
Did this last year (very complete video btw!), it has saved me a few euro by not buying the whole original part, but...the replacement blades were so hard to slide back into the assembly, once the used ones were out, that I decided to buy the whole lot this time U_U'
I use a big hammer on most jobs
This is very painful.
I just installed the driver side one, went to my local honda dealer and bought the rubber replacement. Just remember to keep the two metal sticks as the dealer will not provide when you buy the part from the dealer. I got the part for $8.30 for the one part.
Hey mister, thank you very much for ur video. Its very appreciated. Thumbs up!!
a masterclass ;)
Thank you Very Much it's works on my Civic Type R FN2!!!
I went to repco here in New Zealand and they say they can not replace it but I easily now know how to do it thanks
Thanks to your video I've just changed mine...the new style bosch ones seem a lot easier to fit and remove.
Thanks for posting. Would never have figured it if it wasn't for your vid.
Great effort for video,
Can I do this for my Honda Civic 06 Hatchback?
Screwdriver! Makes sense, thank you
any of these videos in Japanese? freaking lost rn... thanks in advanced
Could you do a video to check if the transmission bearings are worn
Thank you so much for this, took me ages to find the right video!
Thanks for the help.
I have a 2010 civic coupe. Very similar system, I was able to disemble it but did not know that I just needed to change the rubber blade. Sizes for mine are 28 inches driver and 24 inches passenger.
Thanks again.
You are welcome Ricardo. It is a lot cheaper just to replace the rubber instead of the whole screen wiper.
Thanks very much for this, it made the job very easy as you said.
Very helpful video-thanks
Oh man. I found cheap wiper replacements at the store.... bought them. Didn't know you have to replace the inserts for this model.
Detailed video, good job.
Lol I been to Halfords and they told me I need to goto Honda to get the wiper blades. I got a 2010 type r
What size is the windshield for honda civic 2007 ?
So useful bro, thanks for the video
Based on my experience - just chuck the Civic design wiper blades away and put in 'normal' flat blade wipers - the U type hook is the same so there is no need to struggle with the Honda refills. There is no point to the having these refill type blades as the normal flat blades that hook on are pretty much the same and the new generic type comes with it's own clips.
No aftermarket wiper blade fits the 2006 and i think the 2007 Civic 4dr Sedan. Models after that are able to use aftermarket. So we are stuck using refills from Honda. Look it up on the civic forums.
Some sacrifice for those beautiful wipes
Thank you for this very helpful video. I have procrastinated for months about changing the wiper blade because I couldn't figure out how to remove this weird design. Watched this video and completed the work in under 30 seconds.
You are welcome.
Thank you! These wipers are a nightmare!
Weird. My 06 has a push tab on top.
great video showing the hardest part and everything
great video my friend.
You don't have to removed the entire wiper if you are just replacing the blade. .. you can save more time by removing and installing the wiper blades only even it is attached to the wiper body. Removing the entire wiper is such a waste of time... it only took me 1min each blade
That's true Leon, but I find that it is easier if you remove it. However, if you find it is easier just to leave it attached to the body, then use your method by all mean. Thanks for sharing.
I would like to see a video of that. Sounds pretty awkward to replace the inserts without detaching the blade first.
Thanks for that, got the job done.
You saved me on this one. Thank you!
Thank you!! 👏🏻👏🏻👏🏻👏🏻
Thank you 🙋♂️
Thank you for help!! :D
Thanks for your help