Mysterious Lightbulb Hack
HTML-код
- Опубликовано: 4 окт 2024
- Prank your friends with this homemade lightbulb hack!
Check out my 'secret' classic videos: www.kipkay.com/...
Laser Videos: bit.ly/KipkayLa...
Easy Projects: bit.ly/KipkayEa...
Pranks & Jokes: bit.ly/KipkayPr...
Hacks & Mods: bit.ly/KipkayHacks
Spy Gadgets & Devices: bit.ly/KipkaySpy
Explosions & Loud Things: bit.ly/KipkayEx...
Way too much work. Can I just have that one?
you have a perfect infomercial voice
This was the first KipKay project that I did.
Take note people, the led is being powered form a 6V supply, and will most certainly blow up. Add a 100 ohm resistor in between if you do this.
It looks like he has put a resistor in the shrink tube, but why he didn't say anything about that?
This is an old magic show trick that has been around for years using an ordinary miniature flashlight bulb. I used to do maintenance in a cabaret nightclub and carried one of these through darkened club “switched on” before replacing lamp in light fitting while customers were there. (changing lamp for real one in last few seconds). Better than floor show and management did not mind as customers were amazed after few drinks…
haha ron, thats a laugh. yeh, you used to buy these bulbs in joke magazines that used to be in circulation by the dozens in the 70's.
good in till some one in your house think's its a normal light bulb and plugs it in to 240v
Epic
kaboom
Tesla could do this without batteries ortaking the bulb apart in the late 1800s... lol
If Tesla had invented the LED, he could have conned the entire world.
He could light fluorescent tubes, not incandescent bulbs.
This
because you know,
I'm all about that base 'bout that base, of a light bulb
I'm all about that base 'bout that base, of a light bulb
I actually laughed at that
thanks
lol I hate the real song
Haha!
That was really Good
this is the first project i ever made which got me started in my very long and lengthy career of electronics... thank you kipkay
really?
frfr
the way you peeled back that brass coating was so epic!!!!!!!!
you're the man!!
Jeez, I bet the long winter months just fly past in your zany household, you prankster you!
the way he says "very" sounds like "vury"
wow really mysterious -__-
This... is the most creative thing I have ever seen.
I actually tried to make this. The metal part was really hard to get off, and I ended up squeezing the lightbulb too hard and it sort of exploded/imploded in my hand. It cut my hand a bit and glass went everywhere, so use a glove and be careful!
RIP RADIOSHACK
?
+Newtritional_ RIP TUX THE CAT ;(
+Anthony Mondz they all shut down
Can you tell us how to turn a regular light bulb into an LED light bulb so we can save energy?
***** Not always. You have to take the work you are putting in to the project into the equation.
cause you have to put a bulky transformer somehow into the bulb if you plan to use the normal light socket to power it.
Perfect project for the guy that lives in a basement.
In 1965 this was marketed as the Uncle Fester (From TV show The Adams Family") magic light bulb. In the TV show he was seen a few time holding a lighted bulb
What a bright idea. What's even more fun is to wire an electrolytic capacitor into bulb base, re-assemble bulb, and screw it into a switched socket that's definitely turned off. When power is applied, light bulb explodes. What a blast!
"It might take some muscle but you'll get it loose." Thats what she said :D
Its better with the old small voltage DC filament bulbs. Although they take more power, they work much better because they will glow faintly and you can claim "i have just enough juice in me to light this up"
Thanks kip kay for the amazing gash in my hand!
Invented the LED Light bulb!
*Correction, not all of his videos are about projects.
Anyone please help me with the name of movie i m searching...In that movie there is a scene where a couple visits an exibition there they find a man sitting and having a lightbulb infront of him..he says if you can switch off this bulb you will win...the couple try to turn off the switch,cut the wire..even they remove the bulb from the but it is still lightining...which movie????
you can use any color for the LED. for the contact, anything that lets current through would work, if you want to amaze people, you should use something that isn´t completely obvious.
Me too. From what I can tell including the L seems to be a British thing much like how they pronounce the H in herb, while we say erb. Wikipedia lists the silent L version as being the US pronunciation.
I love the way this dude says "very."
@jslow3 light-emitting diode - you can buy them at any store that carries electronic parts. If you're not buying them in large quantities they will run anywhere from about 50 cents up to a couple of dollars apiece depending on what kind and size you buy.
sodder basicly means to melt a type of metal onto another serfuce sorta like, glueing down wires but with metal
Handing it to his other hand *Forever Alone*
This would also work as an emergency light source.
If you look at the etymology, the term comes from the 14th C English word sawd which in term comes from old French soldure from Latin solidare. The British may have started pronouncing the L under the influence of the French or Latin, whereas the Americans may have kept the 14th C pronunciation; I wouldn't be surprised if that pronunciation was still around in some British dialects in the 17th C.
You have a voice that could/should be on radio.
the ring closes the circuit between the base and the tip :)
Kipkay you should do a video of the light bulb again except make it into a working light bulb that you can screw back in and except add fully functional led inside but for household you know since they're brighter and kill less electricity and all I personally like the way they light up the room!!
Its also good for camping or when there's a power outage
Question, will it be as bright as a regular lightbulb if the bulb is clear?
you can just use a positive ring and hold the lightbulb only
tbf mate, I was just bored and was looking through my inbox... thanks for giving me some entertainment for the day though, I hadn't even realised you'd commented. I never look at my comments :P
@tronisawesomeful no, you can't make a laser pointer out of the dvd drive. You can use the fans as fans. If you don't know which one the gfx card is, don't think you can do anything with it, not even install it anywhere.
i got the bottom off without breaking the bulb, try it slowly and you'll only need one lightbulb. THANKS KIPKAY FOR THE AMAZING IDEA!
It only cost me ten bucks in a joke shop, found it on the clearance wall, and it was super nice.
What if it is screwed Into a light socket? Probably be a nice light show...
I totally got lost when he brought out the wires.
Hey kipkay I was wondering if you don't have those batterys can you use any other ones? Please write back and tell me what I could use
if lightbulb no.1 stays in tact (the glass bit), can't you just use that glass?
This video was uploaded on the same day as the battery hack.
Why did you buy individual button cells instead of using the hack?
wow be here he was so serious, now he jokes around so much :)
An yellow led would look more realastic
I am a great fan of your projects
Could be used as a emergency light too
LOL!! this video was a great time. i just love the way he says solder!
Congratulations ;)!!!
Use a resistance on the anode (+)??
how did you get out all of the glue & glass & stuff?
I am having trouble getting it out.
does this work with the twirly "efficent" lightbulbs?
love how in most of his videos he assumes we all have soldering material and shit. like id have to hit up my schools glass design class to solder some shit
@MySetanta it's said "soder" sometimes. All the jewelry and metalsmith classes i've been to say it that way.
Do I keep the center part, or do I break it? it's just a little glass sitck.
I'm serious. I gave it to my friend and it did what it was supposed to (not turn on) then when I took it back the glass exploded and a shard cut my eye. I had my wife drive me to the hospital and they said they had to remove it. THANKS KIPKAY!
So that's how mr. Fester always lit his lightbulb!!!
Will it work with one of those energy efficient bulbs?
how did you get all the glue and stuff out of the light bulb base?
So what happens when you try to put 120 volts through it?
I mean it still would fit in a light socket...
How do you solder the wire to the bottom of the base and the side?
"i twist my light bulb back and forth" OMG i couldnt resist DX
It's actually an acronym it stands for light emitting diode
aint nobody got time for that
Oh wait, I think i got some.
but will it blend?
@padasz1 No, it's a hack. Hack doesn't mean just computer programs, it can mean taking control or manipulating any object at your will by nonstandard means..
Sodder? LOL - Surely you mean SOLDER!
I shudder to think what might happen if you screw it in accidentally to a line voltage socket. batteries to some extents work well as a fat resistor, but that's before it explodes
Did you remove the filament in the bulb?
Kipkay showed that it works in the video?
Nice story, all it needs is a vampire
i preffer buying the bulb in the magic shop than going all thru that complicated instructions that i dont understand
yep
@JimbosliceLV Well all he's really missing is the current limiting resistor for the LED but other than that there's nothing wrong with it.
@mattg889 well i think he did over do it with 6 volts, one would have been just fine. i did some LED wiring about a year ago with one dual AA battery pack and a 3.5V LED, and it still glows bright to this day without the need for a resistor. kipkay really did over do it. besides, it's just a one time only thing right?
I've always been taught that the l in solder is silent.
Make a capacitor stuffed mouse. mechanic friends had one kept it on his tool box, magnet in the belly to hold it in place...and it was so cute, whiskers and all, the people would just walk up to it and put their finger out then touch it's nose and they get blasted they might even touch it with their nose.
CAN'T STOP WATCHING LOL
you are the best kipkay!!!
so what he said is... buy one in a magic shop.
@razedeezy its a hobby. yes, people can have both hobbies as well as jobs. a job does not mean you will never do anything else in life again.
i never really thought that you can hack a lightbulb
could the LED be a different color?? and what else could be used to make contact??other than the ring...
could we will do this for our science project??
how do i get the crap off the bottom of the bulb? its like powdery stuff thats stuck under the metal
Use a transistor it'll be better
@FeudalMoon All the white (or blue) LED's I have ever ran across that are the size of the one he uses in this video are around 3.5 volts. 6 volts might not kill a white LED instantly, but it will slowly get dimmer until its just so dim its useless. In the example in this video, using one battery or adding a resistor would fix this problem. Just make very sure of what voltage your LED is and if you need a resistor before you try this.
WHAT SHOULD I USE THIS FOR?
sweet, i need some soldering skills
At leas tthis prank has dedication.
@oxytocination Actually, it's Soldier
...IT’S 3 AM.....
This guy is going to have to problem surviving the Apocalypse
there is a man in my contry that apeared on tv and done this with a light bulb and everyone tought he was supernatural electricity-man...and still do..
Wait wrap the wire around the zip ties? How is that even possible with the zip ties already tightened flush against the button cell batteries? Must take some time to do that part. Cool hack either way! 👍💡
330 people tried getting the supplies to make this.
What if you screw it into a light socket?
Daniel Markiplier Pop!
+Shaco Clone POP goes the LED, batteries, and possibly sparks from the high current through everything.